Edgebanders For Sale

HOLZ-HER STREAMER 1054 EDGEBANDER (W/PRE-MILLING) + GLU JET Gluing Unit: -- Specifications:Min./max. 0.4 - 6 mm Edge Cap; 8 - 60 mm panel thickness; min. panel length 160 mm; feed-speed, 10 MPM (33 FPM) single speed.Equipped with: -- Pre-milling, (2) vertical spindles, counter-rotating with jump action. and manually adjustable infeed fence. -- HOLZ-HER "GLU JET" Cartridge System and flat glue nozzle applicator; Glue heat up time (2 - 3) minutes max.! -- Pressure Section with: (1) Large dia. drive roller & (2) pneumatic pressure controlled idle rollers; horizontal adjustment w/digital indicator. -- Automatic Edge Magazine for coil and strip feed.Workstations: -- End Trimming Unit: Double motor end trims, travel on 45° slides; tilt from 0° to 15°. -- Multifunction Trimming Unit: Top & Bottom trim station for flush/bevel/radius with digital readouts. -- Profile Scraping Unit: Top & Bottom radius scraping unit with mechanical digital readouts positioning. -- Buffing Unit: 2-Motor Top & Bottom buffing. Operator & Machine Controls: -- "HOLZ-HER" Compact Control with: Swivel control panel at eye height, dual digital thermostats, manual push button on/off switches for glue heat up, edge magazine, and all workstations. Complete with: -- Safety/Sound Hood over workstations; fixed panel support outrigger, manually adjustable hold-down beam. - Original factory documentation; used tooling on the machine. -- Actual Model is: HOLZ-HER - STREAMER 1054

HOLZ-HER - STREAMER 1057 XL, ...EDGEBANDER (W/PREMILL & CORNER ROUNDING): + Glu Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PUR Zero Joint Technology System.Working capacity: Min./Max. 0.4 - 6 mm edge cap; 8 - 60 mm panel thickness; min. panel length 160 mm; feed speed: 10 MPM (33 FPM) single speed.Equipped with: -- Pre-milling: (2) Vertical spindles, counter rotating with jump action, and manually adjustable infeed fence. -- HOLZ-HER "GLU JET": Cartridge System and flat glue nozzle applicator; Glue heat up time: (2 - 3) minutes max! -- Pressure Section with: (1) Large dia. drive roller and (2) pneumatic pressure controlled idle rollers; horizontal adjustment w/digital indicator. -- Automatic Edge Magazine: For coil and strip feed.Workstations: -- End Trimming Unit: Double-motor end trims, travels on 45° slides; tilt from 0° to 15°. -- Multifunction Trimming Unit: Top & Bottom trim station for flush/bevel/radius with digital readouts. -- Corner Rounding Unit: (1) Motor for radius/bevel vertical edge trimming; max. 60 mm panel thickness. -- Profile Scraping Unit: Top & Bottom radius scraping unit with mechanical digital readouts positioning. -- Flat Scraping Unit: Top & Bottom flat glue/finish scrapers.Controls: -- Compact Controls with: Swivel Control Panel at eye level, dual digital thermostats, manual push button on/off switch for glue heat up, edge magazine, and all workstations. Complete with: -- Safety/Sound Hood over all workstations, fixed panel support outrigger, manually adjustable hold-down beam. -- Original factory documentation; used tooling on the machine. -- Actual Model is: HOLZ-HER STREAMER 1057 XL.

Holz-her 1315 Edgebender

Overall Length: 19.37' Workpiece thickness min./max (inch): 1.77? Edging thickness(inch): 0.01-0.12? Edging height max (inch): 1.97? Cut edging length min. (inch): 13.78? Workpiece with min. 9inch): 2.36? Workpiece length min. (inch): 7.09? Feed Speed (m/min). 8 Pre-milling cutter unit (m3/h): 900 Flush trim: 280 scraper unit: 280 static underpressure: – pre-milling cutter unit: 1490 flush trim unit:1650 Compressed Air (bar): 6 Features: The SPRINT 1317 series is equipped as standard with the 1906M cartridge glue application system -Fast change of glue -Ready to start in 3.5 minutes -One of a kind – the 1905 MULTI-SYSTEM -Advanced Glue Application System – for a secure joint -Profile trimming at the press of a button HOLZ-HER Control System – high standards safeguard it for the future ¦ Powerful PLC control for rational set-up and operation. ¦ User friendly interface – all information in plain text

HOLZ-HER 1321 SPRINT EDGEBANDER WITH PRE-MILL AND CORNER ROUNDING WORK STATIONS – 633 OPERATING HOURS!Specifications: -- 0.4 - 15 mm (0.02" - 0.59") Edgebanding thickness, 3 mm (0.12") Max. coil thickness, 15 mm (0.59") Max. strip thickness. -- 55 mm (2.17") Edgebanding height. -- 6 - 50 mm (0.24" - 1.97") Panel thickness, 60 mm (2.36") Min. panel width, 180 mm (7.09") Min. panel length. -- 35-1/2" Feed chain height, 18 MPM (59 FPM) Feed speed, 14" Outboard support adjustment.Equipped with: -- "1961" Pre-milling unit, with (2) 2 kW (2-3/4 HP) - 12,000 RPM - 200 Hz Motors, with Up & down cutting modes, & 5 mm (0.20") Plunge travel. -- 820 mm (32.28") Dia. Coil table. -- "1903" Automatic edge magazine, For solid edges, strips, & coiled material, with 40 mm (1.57") Max. loading capacity. -- "1906" Cartridge-type gluing application system, For EVA & PUR glue, with 3-1/2 Min. Heat-up time, Automatic recharge, 4-Cartridge Magazine cap. -- Pressure section, with (1) Large driven roll & (2) Small idler rolls, All rolls with Pneumatic individual control via PLC. -- Microprocessor PLC Control, with 5" LCD Display, Touchpad, PLC for edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, & buffing, & Manual operation without a program. -- Sound enclosure.Workstations: -- "1918" Front & rear end trim unit, with (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors & 0° - 10° Horizontal & Vertical tilt. -- "1823" Top & bottom flush trim unit, with (2) 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motors. -- "1824" Multifunctional trim unit (flush trim/radius/chamfer), with (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors, 5 mm (0.20") Max. radii & flush trim, & 5 mm (0.20") x 45° Max. chamfer. -- "1929" Top & bottom PVC profile scrape unit, with Reversible insert carbide knives & 3 mm (0.12") Max. radii. -- "1983" Single-motor profile trim (corner rounding) unit, with 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motor. -- "1964" Pneumatically-controlled Top & bottom glue scrape unit. -- "1944" Top & bottom buffing unit, with (2) 0.20 kW (1/4 HP) 1,670 RPM Motors & 45° Swivel.Dimensions of this specific machine with outboard support extended: 252" x 63" x 70" H.

HOLZ-HER - 1327 Sprint Classic Special, ...Edgebander + Glu Jet EVA / PUR Hybrid Technology Gluing SystemsNote: This is a "SPECIAL MACHINE for THIN TAPE Only". -- Specifications: Features the HOLZ-HER patented dual "GLU-JET" EVA & PUR Zero Joint Technology System.Edgebanding capacity: Edge thickness min./max. 0.4 - 8 mm (0.02 - 0.31"); coiled material 0.4 - 3 mm (0.016 - 0.157").Workpiece thickness: 6 - 60 mm (0.23" - 2.36"); Workpiece width min. of 65 mm (2.56").Workpiece length: Min. 160 mm (6.29"); variable feed speed 10 - 18 MPM (33 - 59 FPM). Machine Infeed: -- "Open Space" for Premilling Station "1802": (2) 2.0 kW (2.68 HP) - 12,000 RPM motors.NOTE: This machine is not equipped with the Premilling Station, but it can be added. -- Edge Magazine "1903":For coil & strip processing; utilizes motion detector to ensure accurate, troublefree positioning of edge material.Exclusive "Tractor Belt Feed System": Edge guide equipped with automatic guillotine lockout for safety.3° Approach angle allows easy feeding of solid wood edges. -- Pressure Section "1913 Mot":1-Axis Servo controlled adjustment of the edge thickness.Pneumatic Plunge controlled pressure section with: (1) Large driven roller and (2) cantered idle rollers. -- Gluing System "GJ301Auto":Glue Jet Hybrid Technology: Processes "EVA" or "PUR" glue in cartridge or granulate form.Motorized programmable glue nozzle (upper glue line); height positioning. approx. 3-minute heat up time. Workstations: -- End Trimming Unit "1918P": Front & Rear; 2 x 0.45 kW (0.6 HP) - 9,000 RPM each motor.For Straight or Chamfer trimming with: "UNI-POINT Axis for "PCS" pneumatic changeover/swiveling up to 10° bevel. -- Combination Trimming Unit "1827": Top & Bottom; 2 x 0.65 kW (0.87 HP) - 12,000 RPM each motor; for T & B Flush/Bevel/Radius trimming. - "ProLock" Clamping System for rapid tool change.Manual edge radius adjustment up to 3 mm & chamfer adjustment up to 15° with a max. edge thickness of 6 mm. -- "Open Space" for 2nd T & B Trimming Unit.NOTE-1: This machine is not equipped with the 2nd T & B Trimming Unit, but it can be added. -- "Open Space"for Profile Scraping Unit "1929P". NOTE-2: This machine is not equipped with the Profile Scraping Unit "1929P", but it can be added. -- "Open Space" for Finish Scraping "1964". NOTE-3: This machine is not equipped with the Finish Scraping "1964", but it can be added. -- "Open Space"for Buffing Unit "1940". NOTE: This machine is not equipped with the Buffing Unit "1940", but it can be added. Operator Interface: -- HOLZ-HER "PPC 231" Power-PC + "Windows-like" Operating System. - 15" SVGA Flat "Touchscreen" control.USB Connection & Ethernet network connection ready; programs can be easily created and recalled at will. Graphic interface makes programming easy; icon of each unit may be brought up on the screen to show the Operator the status of the unit and the parameters that can be programmed.Edgebander can be operated manually when required, without necess

---In NO RESERVE Auction with $100 starting bid--- HOLZ-HER 1327 SPRINT CLASSIC SPECIAL EDGEBANDER + Glu Jet EVA / PUR Hybrid Technology Gluing Systems (2015) (Opening Bid $100) (No Reserve) (Good Condition) (Auburn, AL) (Note: This is a "SPECIAL MACHINE for THIN TAPE ONLY")

HOLZ-HER 1329 SPRINT EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + Holz-Her Glu-Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the: HOLZ-HER patented dual "GLU-JET" EVA & PÜR Zero Joint Technology System.Edge thickness: Min./max. 0.4 - 12 mm (0.016 - 0.472"); coiled material: 0.4 - 3 mm (0.016 - 0.157").Panel thickness: 8 - 60 mm (0.236 - 2.362"); workpiece width min. of 60 mm (2.36"); workpiece length min. 160 mm (6.29"). Programmable Logic Control (PLC) for Pre-milling, edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Pre-milling Station (1802):(2) 2.0 kW (2.68 HP) - 12,000 RPM motors; equipped with: "ProLock" quick change flange including height adjustment for optimum utilization of cutters. -- Edge Magazine (1901):Small 3° feed angle thanks to nozzle design with easy feeding of coils, strips & up to 3 mm and solid wood edging up to 15 mm (0.059").Exclusive "Tractor Belt Feed System: Edge guide equipped with automatic guillotine lockout for safety. -- Gluing System (GJ301 Auto):"GLU JET" Hybrid "thin film" technology processes EVA or PÜR Glue in cartridge or granulate form.Motorized, programmable glue nozzle (upper glue line) height positioning; automatic reload of the glue cartridges or granulated. -- Pressure Section (1913 Mot):Servo controlled pressure section with: (1) Large driven roller and (2) cantered idle rollers; straight and tapered pressure rollers for perfect glued joints. Workstations: -- End Trimming Unit (1918P): Front & Rear: (2) 0.35 kW (0.5 HP) - 9,000 RPM motor each; unipoint swivel axis for no reindexing when changing from flush to bevel end trim (0° - 10° bevel)."PCS" Programmable pneumatic changeover from flush to bevel. -- Multifunction Trimming Unit (1827Mot4): (2) 0.65 kW (0.87 HP) - 12,000 RPM each motor; Servo motors: (1) For horizontal copy wheel & (1) for tool spindle position; programmable top & bottom unit. Unipoint design with: No second adjustment with pneumatic, programmable tilt action for changing the degree of bevel.Digital counters for vertical copy wheel position and pneumatic air cylinder for in/out prepositioning of trimming motor. -- Corner Rounding Unit (1833 Mot4):(2) Motors with 0.22 kW (0.30 HP) - 9,000 RPM for linear edge trimming or vertical corner rounding with (4) Servo programmable positioning motors.Up to 3 mm edge thickness and workpiece thickness: Min./max. 8 - 60 mm (0.31 - 2.36"); max. feed speed 18 MPM (59 FMP); up to 25 mm panel thickness; 26 - 38 mm panel thickness,16 MPM (52 FPM); 39 - 60 mm panel thickness, 2 MPM (6 FPM). -- Profile Scraping Unit (1929P): Top/Bottom Servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives.Equipped with: Air jet blowers and chip collector box. -- Glue Scraping Unit (1964):Flat, Top/Bottom, ball bearing guided, and pneumatic controlled. -- Buffing Station (1940):Top & Bottom buffing motors with:

HOLZ-HER 1329 SPRINT EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + Holz-Her Glu-Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PÜR Zero Joint Technology System.Edge thickness min./max.: 0.4 - 12 mm (0.016 - 0.472"); Coiled material 0.4 - 3 mm (0.016 - 0.157").Panel thickness: 8 - 60 mm (0.236 - 2.362"); Workpiece width min. of: 60 mm (2.36"); workpiece length min.: 160 mm (6.29"). Programmable Logic Control (PLC) for pre-milling; edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Pre-milling Station (1802):(2) 2.0 kW (2.68 HP) - 12,000 RPM Motors; equipped with: "ProLock" quick change flange including height adjustment for optimum utilization of cutters. -- Edge Magazine (1901):Small 3° feed angle thanks to nozzle design with easy feeding of coils, strips & up to 3 mm and solid wood edging up to 15 mm (0.059").Exclusive "Tractor-Belt Feed System": Edge guide equipped with automatic guillotine lockout for safety. -- Pressure Section (1913 Mot):Servo Controlled pressure section with: (1) Large driven roller and (2) cantered idle rollers; straight and tapered pressure rollers for perfect glued joints. -- Gluing System (GJ301 Auto):"GLU JE" Hybrid Technology: "Thin film" technology processes EVA or PÜR Glue in cartridge or granulate form.Motorized, programmable glue nozzle (upper glue line) height positioning; automatic reload of the glue cartridges or granulated. -- Workstations:End Trimming Unit (1918-P): Front & Rear: (2) 0.35 kW (1/2 HP) - 9,000 RPM Motor each; unipoint swivel axis for no reindexing when changing from flush to bevel; end trim (0° - 10° bevel)."PCS" Programmable pneumatic changeover from flush to bevel. -- Multifunction Trimming Unit (1827MOT4): (2) 0.65 kW (0.87 HP) - 12,000 RPM Each motor; Servo motors: (1) Horizontal copy wheel & (1) tool spindle position; programmable top & bottom unit. Unipoint design with no second adjustment with: Pneumatic, programmable tilt action for changing the degree of bevel.Digital counters for vertical copy wheel position and pneumatic air cylinder for in/out prepositioning of trimming motor. -- Corner Rounding Unit (1833 MOT4):(2) Motors each with: 0.22 kW (0.30 HP) - 9,000 RPM; for linear edge trimming or vertical corner rounding with (4) Servo programmable positioning motors.Up to 3 mm edge thickness and workpiece thickness; min./max. 8 - 60 mm (0.31 - 2.36"), max. feed speed 18 MPM (59 FMP); up to 25 mm panel thickness; 26 - 38 mm panel thickness, 16 MPM (52 FPM); 39 - 60 mm panel thickness, 2 MPM (6 FPM). -- Profile Scraping Unit (1929-MOT2): Top/Bottom Servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives.Equipped with air jet blowers and chip collector box. -- Glue Scraping Unit (1964):Flat, Top/Bottom: Ball bearing guided and pneumatic controlled. -- Buffing Station (1940) Top & Bottom buffin

HOLZ-HER 1329 SPRINT EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + Holz-Her Glu-Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PÜR Zero Joint Technology System.Edge thickness min./max. 0.4 - 12 mm (0.016 - 0.472"); coiled material 0.4 - 3 mm (0.016 - 0.157").Panel thickness 8 - 60 mm (0.236 - 2.362"); workpiece width min. of 60 mm (2.36"); workpiece length min. 160 mm (6.29"). Programmable Logic Control (PLC) for Pre milling, edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Pre milling Station (1802):(2) 2.0 kW (2.68 HP) - 12,000 RPM motors; equipped with: "ProLock" quick change flange including height adjustment for optimum utilization of cutters. -- Edge Magazine (1901):Small 3° feed angle thanks to nozzle design with easy feeding of coils, strips & up to 3 mm and solid wood edging up to 15 mm (0.059").Exclusive "Tractor-Belt Feed System", edge guide equipped with automatic guillotine lock-out for safety. -- Pressure Section (1913 Mot):Servo-controlled pressure section with (1) large driven roller and (2) cantered idle rollers. Straight and tapered pressure rollers for perfect glued joints. -- Gluing System (GJ301 Auto):"GLU JE" Hybrid Technology "thin film technology processes EVA or PÜR Glue in cartridge or granulate form.Motorized, programmable glue nozzle (upper glue line) height positioning. Automatic reload of the glue cartridges or granulated. Workstations: -- End Trimming Unit (1918-P):Front & Rear - (2) 0.35 kW (0.5 HP) - 9,000 RPM motor each; unipoint swivel axis for no re-indexing when changing from flush to bevel end trim (0° - 10° bevel)."PCS" programmable pneumatic changeover from flush to bevel. -- Multi-Function Trimming Unit (1827MOT4): (2) 0.65 kW (0.87 HP) - 12,000 RPM each motor, Servo motors: (1) for horizontal copy wheel & (1) for tool spindle position; programmable top & bottom unit. Unipoint design with no second adjustment with pneumatic, programmable tilt action for changing the degree of bevel.Digital counters for vertical copy wheel position and pneumatic air cylinder for in/out pre-positioning of trimming motor. -- Corner Rounding Unit (1833 MOT4):(2) motors with 0.22 kW (0.30 HP) - 9,000 RPM, for linear edge trimming or vertical corner rounding with (4) Servo programmable positioning motors; Up to 3 mm edge thickness and workpiece thickness min./max.8 - 60 mm (0.31 - 2.36"); max. feed speed 18 MPM (59 FMP) up to 25 mm panel thickness; 26 - 38 mm panel thickness,16 MPM (52 FPM); 39 - 60 mm panel thickness, 2 MPM (6 FPM). -- Profile Scraping Unit (1929-MOT2): Top/Bottom Servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives.Equipped with air jet blowers and chip collector box. -- Glue Scraping Unit (1964):Flat, Top/Bottom, ball bearing guided and pneumatic controlled. -- Buffing Station (1940):Top & Bottom buffing mo

HOLZ-HER 1402 HF Compact EdgebanderFeatures: -- Cartridge glue system, 3 mm edge thickness cap., -- Semi-automatic feed magazine, coil stock feeds automatically with guillotine cutoff, all strip stock is fed manually with pusher bar to advance the edging. Digital glue height indicator.Workstations: -- Double motor end trim (1 HP - 10,500 RPM motor ea.) -- Universal top & bottom fine trim (1942M) for bevels from 0° - 15³; allows simultaneous bevel & profile trimming (1 HP - 18,000 RPM motor ea.; trim motors are 0.6 kW HF - 300 Cy). -- Top & bottom PVC scraper unit (1929) for 0.8 - 3 mm radius. -- Top & bottom buffing (1940), 0.3 HP - 1,620 RPM motor ea. -- Single feed speed of 35 FPM. -- Complete with: Fixed outboard panel support, frequency converter, sound enclosure, and used tooling.

Holz-Her 1403 EdgebanderSpecifications: -- 0.016" - 3/16" Edge thickness cap., height max. 2", panel length min. 7" and thickness 1/4" to a max. 1-3/4". -- Equipped with: Automatic feed magazine for coil material & strips, with guillotine cutoff; cartridge glue system, heat-up time (3 - 5) Min; 4-roll pressure section. -- Workstations: Double motor end trim (1 HP - 10,500 RPM motor ea.); top & bottom trim (1 HP - 28,000 RPM motor ea.), for flush & bevel trim; single feed speed of 33 FPM. -- Complete with: Sound enclosure & outrigger panel support.

HOLZ-HER - 1411-3, EDGEBANDER Cartridge Glue System, 5 mm edge thickness cap. (up to 13 mm w/optional tooling), 1-3/4" max. panel thickness, and 7" min. panel length.Equipped with: -- Automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff. -- Pressure section with (1) large dia. drive roller & (1) idle. Workstations: -- Double-motor end trim model "1918" (tilting 0° - 10°), 0.5 HP - 18,000 RPM motor each. -- Top & bottom radius trim model "1942", 0.8 HP - 18,000 RPM motor each (trim motors are 0.6 kW HF). -- Top & bottom glue scraper unit "1964", with air jets for blow-off. -- Top & bottom buffing unit "1940" (tilting cap. 0 - 5°), 0.2 HP - 1,400 RPM Motors each. -- Variable feed speed from 36 - 52 FPM. - Fixed outboard panel support. Complete with: -- PLC (Programmable Logic Control) for easy setup and program storage. -- Frequency converter, sound enclosure, and used tooling..

HOLZ-HER 1416 SPRINT EDGEBANDER WITH CORNER ROUNDINGMax. 1/2" (13 mm) solid wood banding & 3 mm PVC cap., 2-3/8" max. panel thickness and 5-1/2" min. panel length.Equipped with: Cartridge glue system w/hopper & "quick melt" feature, glue applicator nozzle "1906", automatic magazine for coil, strip & solid edgebanding (1901); HD guillotine for 3 mm PVC. -- Pressure section with (1) large dia. drive roller & (2) idle rollers, each w/individual pneumatic plunge & pressure control, powered 1st roller with electronic speed control synchronized with chain feed speed (1913).Workstations: -- Double motor end trim "1918" (0.5 HP - 18,000 RPM motor ea. 300 Cy HF motors), adjustable 0° - 10° for chamfer cuts electro-pneumatically. -- Top & bottom flush trim unit "1823" (0.8 HP - 300 Cy HF motors 18,000 RPM Motor ea.), SIKO digital readouts, tilts 0° - 15°. Top & bottom fine & radius trim unit "1942M" (0.8 HP - 300 Cy HF motors 18,000 RPM Motor ea.), bevels 0° - 15°, SIKO digital readouts. -- Top & bottom fine trim unit. -- "Single Station" corner rounding unit "1983" (0.5 HP - 18,000 RPM motor ea. 300 Cy HF motors). -- Top & Bottom radius scraping unit. -- Top & bottom surface scraper "1964"; Top & bottom profile scrapers for thick PVC "1929". -- Top & bottom jump buffing unit "1944-K" (0.25 HP - 2,600 RPM ea.), tilts 0° - 5°. -- Variable feed speed 8 - 20 MPM (26 - 67 FPM), panel overhang beyond chain 35 mm (1.38").Includes: -- Microprocessor for line control & glue temperature, 10 KVA frequency changer, outboard panel support, and sound enclosure w/interior lights over enclosed workstations of the machine. -- Used tooling on all work stations.Not included: Feed & Return conveyor not included with machine

HOLZ-HER 1432 CP/B EDGEBANDER (Compact) -- Cartridge glue system (single cartridge system), 0.3 to 3 mm (1/8") edge thickness cap., 2" max. banding height, 60 mm min. panel width and 180 mm min. length.Equipped with: -- Semi-automatic feed magazine, coil stock feeds automatically with guillotine cutoff, all strip stock is fed manually with pusher bar to advance the edging.Workstations: -- "Single" motor end trim for leading & trailing edge trim motor recently replaced; -- Top & bottom flush/bevel trim (1 HP - 28,000 RPM motor ea.) recently replaced with BOSCH Trimmer motors. -- Top & bottom buffing unit (0.3 HP - 1,620 RPM ea. motor), equipped w/cotton flap wheels. -- Single feed speed 16.5 FPM.Complete with: -- Sound/safety enclosure, outboard panel support.- Machine on casters.

HOLZ-HER 1435-SE EdgebanderCartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff.Workstations: -- Double motor end trim (2) 0.3 HP - 9,000 RPM motor ea.), chamfers 0° - 10°. -- Universal top & bottom fine trim (for bevels from 0° - 15°) allows simultaneous bevel & profile trimming, (2) 0.8 HP - 18,000 RPM motor each; all trim motors are 0.6 kW HF - 300 Cy. -- Top & bottom PVC scraper unit for 0.8 - 5 mm radius, with air jets for blowoff. -- Top & bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed 35 FPM.Complete with: -- Built-in operator control panel, outboard panel support, frequency converter, used tooling, and sound enclosure.

HOLZ-HER1435-SE EDGEBANDER1906 Cartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff. Workstations: -- Double motor end trim (2) 0.3 HP - 9,000 RPM motor ea.), chamfers 0° - 10° -- Universal top & bottom fine trim (for bevels from 0° - 15°) allows simultaneous bevel & profile trimming, (2) 0.8 HP - 18,000 RPM motor ea; all trim motors are 0.6 kW HF - 300 Cy. -- Top & bottom PVC scraper unit for 0.8 - 5 mm radius, with air jets for blowoff. -- Top & bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed 35 FPM.Complete with: Built-in operator control panel, outboard panel support, frequency converter, used tooling, and sound enclosure.

HOLZ-HER 1435-SE EDGEBANDERCartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff. Workstations: -- Double motor end trim (2) 0.3 HP - 9,000 RPM motor ea.), chamfers 0° - 10° -- Universal top & bottom fine trim (for bevels from 0° - 15°) allows simultaneous bevel & profile trimming, (2) 0.8 HP - 18,000 RPM motor each; all trim motors are 0.6 kW HF - 300 Cy. -- Top & bottom PVC scraper unit for 0.8 - 5 mm radius, with air jets for blowoff. -- Top & bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed 35 FPM.Complete with: -- Built-in operator control panel, outboard panel support, frequency converter, used tooling, and sound enclosure.

HOLZ-HER 1435-SE EDGEBANDERCartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff.Workstations: -- Double motor end trim (2) 0.3 HP - 9,000 RPM motor ea.), chamfers 0° - 10° -- Universal top & bottom fine trim (for bevels from 0° - 15°) allows simultaneous bevel & profile trimming, (2) 0.8 HP - 18,000 RPM motor each; all trim motors are 0.6 kW HF - 300 Cy. -- Top & bottom PVC scraper unit for 0.8 - 5 mm radius, with air jets for blowoff. -- Top & bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed 35 FPM. --Complete with: --Built-in operator control panel, outboard panel support, frequency converter, used tooling, and sound enclosure.

Holz-her edgebander This machine is still under power and available for inspection.