Woodworking Equipment For Sale
1752 Results Found
$ 11,800
WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.
$ 36,500
WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 17 - 78 FPM, powered by a 4 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 460 Voltage / 3 Phase Power using 79 Full Load Amps. -- Includes - All heads, rollers, setup tools shown are included, Owner's Manual, and 4-hose Dust manifold.This machine runs perfectly, is in Good Condition- with some dents to the outer sound enclosure. Overall Dimensions: 132"; x 64"; x 64";Approx. 8,000LBSRemoval is responsibility of buyer. Seller can build a crate, and put it on a truck for an additional $1,000.00
$ 17,500
WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 20 - 78 FPM, powered by a 5 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 230 Voltage / 3 Phase Power using 146 Full Load Amps. -- Includes - All heads, rollers, and setup tools shown in photos are included.Overall Dimensions: 132";L x 78";W x 68";HApprox. 8,000LBS
Call for Price
Weinig Profimat 23E 5 head moulder Bottom Right Left Top Bottom Complete with Weinig Rondamat 950 profile grinder. 460 volt 3-phase Clean machines from a low volume specialty shop.
Call for Price
Manufacturers Specifications tool diameter: 100 - 300 mm tool width: max. approx. 230 mm motor / grinding disc drive: approx. 1,1 kW free angle, adjustable 15 - 35° drive for coolant pump: approx. 0,065 kW tank capacity: approx. 90 l
$ 3,900
WEINIG 051 Single End Tenoner W Motorized Feed TableSpecifications: -- 2-Head Tenoner for cabinet and window parts. -- (1) Trim saw & (1) Stacked cope head, both direct motor drive, sliding table with fence line and (2) pneumatic hold downs, control panel and large asssortment of high quality tooling.Actual model is WEINIG 051
Call for Price
Call for Price
Wemhoner Variopress Basic 1000 Plus Model KT-MB-28/MB/15-240 Single Daylight Upstroke Hydraulic Press Max. Opening 2,540mm X 1250mm ( 100” X 49” ) 2 Trays Pin System 3D Application Foil Types PVC, PET, PP,ABS, Veneer And HPL Total Press Capacity 240 Tons Top/Bottom Heated Platens Working Height Approx. 900 mm (35.4”) Daylight Opening 150mm (5.9”) Upper Platen Heated by Thermal Oil Circulation 6 Cyclinder 125mm ( 4.9”) Diameter Total Press Pressure 2,400 KN Two Tray System with Pin System Tables arranged in over-under Configuration with Scissor Lift entering and exiting press on the same End Vacuum Pump and Vacuum Tank Foil Roll Storage Carousel ( Paternoster) for Vinyl Rolls Programmable Logic Controller PLC Model Siemens Simatic S7 Setting Parameters and operation of Pin System Year 2005 AS NEW CONDITION 460 volt 3 phase
WEMHONER Hot Oil Feed Thru Press - 7’ x 12’ Platen, 7.5’ x 13’ motorized feed belt - 340 Ton pressure, 8 cylinders, 6” opening - 12’ gravity outfeed conveyor - Includes natural gas boiler for hot oil. - Machine is no longer in service and disassembled. Call 800-459-2148 for more info.
Call for Price
WESTERN PNEUMATICS FJE 430R Medium Production Finger Jointer SystemRight and left Shaper Section with Automatic crossover model FJE 430 RCSpecifications: -- Material Thickness Capacity: 5/8"; – 2"; -- Material Width Capacity: 1-5/16"; to 8"; -- Material Length: 4"; – 28"; -- Feed Capacity 30 - 60 Lugs Per Minute -- Lugs are Space on 12"; Centers -- Feed Motor: 10 HP -- Variable Speed Feed from 30 - 60 FPM -- Scoring Saw Motors: 3 HP -- Trim Saw Motors: 5 HP -- Cutterhead Motors: 15 HP -- Manual Transfer Corner -- APQUIP Glue Applicator -- Assembly Press w/ 16’ Max. Cut-off Capacity, Model AMS 248 LB -- Assembly Section Feed Variable Up to 150 FPM -- Self-Contained Hydraulic Unit -- 7.5 HP Cut-off Saw -- Board Press, Model BPS 216 RC -- Standalone Control Cabinet -- Touchscreen PLC Control
Call for Price
Call for Price
Model: 1000L From left to right feed Blade Capacity: 14 Cutting Capacity: 2-3/16 x 8-1/4 OAD: 25"L x 25"W x 45"H Also Included Tiger stop
$ 6,450
WHIRLWIND - 855, Dual Table Oscillating Edge SanderDouble-sided with 8" x 56" platens size.Specifications: -- 7.5 HP - 1,725 RPM TEFC Motor, abrasive belt size of 8" x 151"; approx. (150) oscillations/Min with 3/8" stroke. -- 11" x 55" Side table, tilts 0° - 45° with 8" vertical adjustment; tiltable end table; iron frame machine base. Complete with: -- Magnetic electrical controls w/overload protection, dust hood on drive end, and all standard equipment.
Call for Price
Call for Price
Call for Price
WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.
WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt