Barr Mullin Wondersaw Optimizer with Computerized Laser Controls Tichniess: Up to 3" Width: 31" Min cut: 4" Feed height: 34-1/2" Floor Space: Apprx 21' x 15' 480 volt

Manufacturers specification - Extra Heavy Main Frame Throughout with large support table - 6” minimum length with this type of saw the blade is cutting downwards ie. forcing the Blade onto the chain – hence max. stability and safety are realized. - Better chip clearance for shavings on deep cutting - Glue Joint Range – 12” to 10 Ft. - Depth of Cut 4.7”(120mm) max - Split chain – double track with HRC60 Rockwell Hardened Guideways - 26” (660mm) Saw to Column - 8 Press Rolls hold material firmly on the track - 15 HP direct drive (20 Hp Main Motor – optional) - 3 HP feed motor - Feed Speed 33 to 180 FPM variable - Automatic chain and track Oiler - 41” length of chain above table - Saw Arbor Height adjustable - Max. 18” Blade Diameter x 2” Bore Dia. saw Arbor with 14mm pin at 65mm centers - Saw Arbor Brake Included - Anti-kickback fingers top and bottom - Dust collection outlets: - Top 5.75” 700 CFM - Bottom 5” 550 CFM - Table Dimensions – 82” x 40” x 33.5” high (Can be added to optional) - Net weight – 4400 lbs - Electrics 230/460

Cooper Optimizer Gang Rip Saw Cooper Edger Both set up inline and ready to be removed.

Cornell Double Arbor Gang Saw

This unit has been in storage for some time and will need some TLC.

The seller has upgraded to a new machine and no longer needs this rip saw. This machine still runs a few times a week at the shop. 15 HP Motor 2 HP Feed Motor 2" Arbor 16" Max blade capacity Chain drive

Diehl Model 75 Straight Line Rip Saw Chain is in good shape. Left and right chains are worn evenly. Includes: Laser Variable Speed: 4-speeds

Griggio C250 Rip Saw 250 mm Wide belt (10")

Rip Saw Model SDL 1200 Edging Conveyor Model UHY 1900

This system was purchased used and never put into service.

Madison 202 Straight Line Rip Saw

The Rip Saw is still in good running condition and still in use.

Mattison 404 Rip Saw Seller was using until they upgraded to a gang rip. Ready to ship.

MATTISON - 404, ...Straight Line Rip SawSpecifications: approx.20HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capy. -- Table size: 65" x 77" Long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication. -- 2 HP Feed motor with (2) feed speeds of 50 & 100 FPM

Mereen Johnson Model 312 DC SR1R Rip Saw 600 V/3 PH/60 Cy

Mereen Johnson Model 312 Rip Saw Includes: New pads for the chain Includes: Twistlock Collar Mounted Saw Blades Available approx May 1, 2024

Mereen Johnson 424DC 24" Wide Arbor 75 HP Motor (460v/3Ph) 3 HP Feed Speed Variable Feed Speed Air loaded pressure rollers

Mereen Johnson 431-DC Gang Rip Saw

Mereen Johnson 424-DC Gang Rip Saw

Manufacturer specs (to be confirmed): - Mereen Johnson "312-DC-1" Gang rip saw - 12" Arbor cap., 14" max. dia. tooling, 3-1/2" max. thickness, 30" min. length for glue joint accuracy & 22" min. for busting only; 6" throat. - 50 HP - 3,600 RPM TEFC Direct drive motor - Arbor with disc brake & load meter - Arbor lockout on the access door - Feed & chain: 3 HP Variable feed speed from 30 - 150 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain - "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with BRAND NEW replaceable steel-backed rubber insert strips, automatic chain oiler with low-level shutoff. - (4) 3" Dia. air loaded overhead pressure rolls; full width segmented maple, spring loaded overhead pressure shoe, pressure rolls & pressure shoe unit adjust with scale & pointer thickness reference; anti-kickback fingers. Includes (1) saw sleeve and spacers. - 460 v/3 ph