Big on Dry Thermal Modification Kiln Optional Single or Double Units available! The photos on this listing show the latest kiln installed in the US. The wood treated was 12" wide pine at 190 degrees C. Contact CMS for more details! - Gas boiler system (optional oil or electric) - Quick, efficient installation provided by technicians! - Complete package includes shipping, installation and all drawings fro site preparation. - Approx 10,000-12,000 board foot capacity (depending on lumber size and bundle stacking) on the Double Kiln. - Customer support via internet connection.

Big on Dry (BOD) manufactures conventional dry kilns in Italy. They customer manufacture every unit and provide, installation, training and customer support. Conventional drying kilns installations are for sawn wood, hardwood and softwood, with capacities ranging from 15 m3 to over 250 m3, fully aluminium or customized to existing structures, made of standard modules or provided as per specific customer requirements. BIGonDRY srl kilns may be powered by any source of energy: hot water, steam or diathermic oil supplied by conventional or solid fuel boilers as well as hot air generated by gas, diesel or electric heating systems. Contact CMS for more information on BOD kilns!

Bliss Hammer Mill Model ED3840 250 HP Motor 1/4"- Screen Motor and machine have been gone through and checked.

Bob Hanna Single notcher

BolDesign Kiln that includes Future-Design Controls FDC-2010-K5C Small Kiln Features • Board Feet Capacity: 2,000 to 10,000 BF (Board Feet) • Expect a 6-9 Week Turn Around • Easy to Clean and Maintain • Built with Aluminum and Stainless Steel, The Same Aluminum that is food grade used in Commercial Kitchens • RH control results in less lumber damage, this leaves you with better, brighter colors These Kilns are Built for Forklifts • Pallet Stock Drying Kiln; Disassembled crated and ready to load. 1 truck

Brewco 4-Head Resaw Seller has a hydraulic unit to go with the machine. No controls. Optional: System can be cleaned up and controls added PER SELLER: this machine is able to pass 7.75" cants it was purchased in Nelson BC 20 years ago it has not run since it is ready to go but has only on off switches and no motor starters per se I have not pulled the machine out to clean and paint and get ready to move it needs cleaned/ painted/ starters for 4-20hp motors/ small hyd unit for feed belt and feed rolls nice machine, I have not operated it but was running when I bought it and has been under cover since will need 5 starters, and a small hyd unit 5 hp, which i can provide this machine is easy to get ready if we have a commitment

This system is no longer needed at the current facility. Ready for immediate removal! - Brewco Wolf Resaw - 4" Blade; 20'4" Long - 40" Bandwheels - 40 HP Main Motor - 10 HP Hydraulic Feed - McDonough Style Guides - Some spare blades - Head moves up/down, not the bed - Approximate dimensions: 9'L x 10'W x 6'H - Also available separately: - 8' Infeed Belt - 16' Outfeed Rollcase

Brewco B1600 Grade Resaw System 5-Way Board Separator Ready to load!

Brewco B1600 Grade Resaw System: Complete run around, board separator, conveyors Brewco Edger: (2) 10 hp motors, (2) 16” saws , 4” to 24” wide capacity , 4” thick capacity Removed from service on 6/17/24 and ready to load.

Brewer 5-Head Resaw Return Belt

Brewer 3-Head Resaw Model # BR-3B8X12R

Brewer 2-Head Resaw Model: Dimond Eagle 2-HD Blade Size: 2" Year: 1997 Voltage: 480V 3ph Material Capacity: 15" width Serial #: 3478 Condition: Fully operational, no rust, Updated electrical panel. Spare Parts: 2" Blades Dimensions: 30" long x 12' wide Price: $60,000 New Bearing on one of the wheels. has 1 New Motor.

This machine was removed from production about 5 years ago in working condition. Currently under power. Seller believes it to be about 12 years old. Set up for 30x42 3-stringer w/3 bottom & 6 top decks: will do up to 40x48 Production rate they did was about 250-275/day per 8hr shift Does not have all of the inline air filters & water traps. Seller does not use the bottom spacers Machine needs some tubing and minor parts to get the bottom pop-up spacers functional. 110V

This machine was removed from production about 6 months ago in working condition. Has a new motor for the machine and just needs to be wired up.

10 HP 3200 rpm main motor 2.7 HP feed motor Cuts on crayon marking Variable feed up to 262 fpm 18” blade 30 mm arbor 460 volt 3-phase (2) Roller conveyors can be included if needed

Cantek Horizontal Resaw Great Condition Very Low Hours Voltage 230/480/3

This grinder was removed from service in good working condition. It is ready to load/currently in storage 200 HP Main Motor Cutters 117 F-Cutters Screen (4 ) 22" Diameter Wide with 1-1/2" Holes The width is 51” and the height is 17” (infeed opening)

Champion 5 HP 575 Volt 2 Stage 24 CFM unit.

Clark Lift 9' Mast Unsure of model number. Plate is worn down. Machine starts and runs.

Clark 6000 lb 60” forks side shift Hard tire