Diehl Model 75 Straight Line Rip Saw Chain is in good shape. Left and right chains are worn evenly. Includes: Laser Variable Speed: 4-speeds

The seller has upgraded to a new machine and no longer needs this rip saw. This machine still runs a few times a week at the shop. 15 HP Motor 2 HP Feed Motor 2" Arbor 16" Max blade capacity Chain drive

This system was running daily before hte facility shut down 4-years ago. Buyer will need to provide rigging. (240) 4" x 12' Bags 100 HP Main Motor Bags are cleaned by compressed air approx every minute System is approx 1998 Approx 35000-38000 CFM

Donaldson Model ECB & ECB-2 Dust Collector - 3-units total Control Panel

DOOSAN portable lighting with only .2 hours.

7.5 HP 230 volt 3phase 2 sets of fabric upper bags

7.5 HP 230 volt 3phase 2 sets of fabric upper bags

Edmiston 4 Head Block Circular Sawmill Good Running Condition Used Occassionally

Complete sawmill that is used daily. Infeed deck to debarker Morbark debarker with bark conveyor Infeed deck to mill Edmiston Sawmill: 4 HB Carriage, operator cab, drop conveyor for slabs Edmiston Edger Greenchain with rooftop Precision 48" Chipper with infeed All electrical, controls and hydraulics included

EHW ITALIA designs, manufactures and supplies belt dryers, single or double-decker (one above the other), of several size from 500 up to 30000 kg/h of dried product, in order to dehydrate different types of materials such as biomass in general, industrial sludge, etc., characterized by low dust emissions in the environment. They can be combined with cogeneration plants, designed and built for quality drying and performed in optimal times depending on the raw material and removing the risk of fire during the working cycle. EHW can supply belt dryers of several size, 3 – 4, 5 – 6 meters wide and long according to request and therefore to be defined, in order to dehydrate materials with low dust emissions into the environment. Our dryers are designed and built for quality drying performed in optimal times depending on the raw material, type of wood, humidity, size and required hourly output. The high performance EHW dryers are equipped with the best components and require low maintenance. Each machine is specifically designed for the requests of our customers, and supplied in different sizes based on the type and quantity of product to be dried, adapting perfectly to the residual energy created through cogeneration plants. EHW dryers are distinguished by their strength and long life, their optimal thermal efficiency,extreme ease of use and a high level of functional safety. They guarantee optimal drying of the product, using low temperatures with significant energy saving, low impact on operating costs and an important economic revenue. The dryers are equipped with auger loading bunkers, ensuring a homogeneous distribution of the product on the belt, a crossed belt, a drying tunnel complete with systems for dust extraction, belt centering and cutting-edge product handling, and a structure made of sturdy steel profiles. EHW dryers are perfectly suited to our customers’ heat generators, whether they use hot water with heat coming from cogeneration plants or from hot smokes recovered from production plants, using increasingly advanced and modern systems to desiccate the raw material. We also offer a wide range of equipment such as automatic belt washing – making the cleaning process quick and efficient and ensuring perfect performances with reduced operating times, fire-fighting devices, and heat recovery systems, significantly limiting the request for thermal energy of the plant, and much more.

Dust blower used on Resaw or Edger 550 Volt 3 Phase 1-1/2 HP 3400 RPM

English 600 HP Boiler - (2) Units available New in 2000 One is set up for wood and only run for 3-years The second is wood/oil backup and only test fired 300' Covered Waste Conveyors available to transport waste to boilers Large capacity bucket load/silo available to store wood waste Complete loading/unloading augers available All pumps, condensate tanks, piping, electrical, catwalk, exhaust, infeed bins, suit bins, augers included. Two large stacks also available

Excalibur Smart Incising for Round Timbers from Timber Treatment Solutions (TTS). - 63 mm - 200 mm Diameter (1.29"-7.8") - Minimum length of 200 mm to no max (7,8" - (9) Incising Heads - Self cleaning system for blades - Allows superior preservative penetration with pressure treatment - Optional: Customized builds for larger pole requirements

Northtech MRS-14-DXL 460v Manufacturer notes: This is a very popular machine and cost effective. New open ended design allows for you to cut wide material up to 27-1/8? wide. Plus spare arbors, lasers, and the optional quick locking, easy to adjust infeed will not break the bank. The Northtech heavy-duty 50 HP multi-rip (“gang-rip”) saw with 15? maximum blade diameter quickly and accurately cuts material up to 4-15/16? thick and 27-1/8” wide. Cutting both sides of your blanks at once provides incredible parallelism, reducing required moulder allowance, and increasing your yield. Laser guides (one included) and an optional 103” fence make proper alignment of even the longest material simple and precise. Variable feed speeds of 25 – 120 FPM and powered height adjustment further improve operator efficiency.

Northtech MRS-12N Gang Rip 50 HP Motor Needs a new safety with on the door

Northtech Chop Saw

Manufacturer’s Specification - 15HP Motor + 1HP feed motor (with Wye Delta soft start) - Mechanical variable speed (45' – 100' FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”. - Bottom & top kickback fingers - Rack and pinion fence for precise and quick positioning. - Digital electronic oiler provides maximum chain and race life. - 15-1/2? distance from column to blade. - 8' glue line tolerance.

Nova Dry Kiln 26’ wide x 25’ deep holds 5500-12000 board feet propane or Natural Gas fired

Nyle L500 Kiln (High temperature system)

Nyle Firewood Kiln Holds approx 9-cords