Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 12mm. Machine Base The machine base is a rigid, ribbed steel structure and is designed to provide maximum support for the working units. The ribs provide stability and, at the same time, provide openings in the base to facilitate removal of the chips/dust. Capacities And Speed Edgebanding thickness: .4mm - 12mm (.016-1/2”) Guillotine capacity: 3mm Feed speed: 33-66 ft/min. Panel height: 3/8” min – 2 3/8” max Minimum panel length: 5 1/2” Minimum panel width: 2” Minimum distance between panels: 24” Startouch Controller The Stefani KD comes equipped with the new "Startouch" controller. This controller features a 12" touch screen display. Capable of storing 100 programs, 6 at the touch of a single key. Color graphic display of all the working units.

STEFANI SOLUTION 8600 CNC EDGEBANDER CNC HORIZONTAL & VERTICAL POSITIONING, STANDARD STATIONS, PRE-MILL, ROUGH & FINE TRIM STATIONS, CORNER ROUNDING, MX80 HSK MILLING UNIT, RAS/S & RCA/2C SCRAPING UNIT, SP/F TOP & BOTTOM BUFFING EDGEBANDING THICKNESS: 0.4MM – 22MM PVC & ABS IN COIL OR STRIPS HPL STRIPS SOLID WOOD UP TO 22MM PANEL HEIGHT: 10 - 60MM (3/8” MIN – 2 3/8” MAX) MINIMUM PANEL LENGTH: 140MM (5 1/2”) MINIMUM PANEL DIMENSIONS: WITH MANUAL IN-FEED LENGTH WISE : WIDTH X LENGTH90 X 220 MM (3 1/2" X 8 3/4") CROSS WISE : WIDTH X LENGTH 220 X 135 MM (8 34" X 5 3/8") FEED SPEED: 12 - 25 M/MIN (40 - 82 FT/MIN) MINIMUM DISTANCE BETWEEN PANELS: 650MM (25 1/2”) (32” WITH CORNER ROUNDING) MACHINE WORKING HEIGHT: 950MM – 970MM (37.4” – 38.2”)

4300mm x 1920mm x 80mm work area 4.4 KW 3450 RPM motor 300mm blade with 30mm arbor 14'1" rip cut 6'3"cross cut 220/440 volt 3 phase

Stromab WS1 Cutoff Saw Thru feed system with defecting o cutting preset sizes - NO optimizing! Operator can mark the board with crayon. Demo unit with low hours!

Stromab Stromab TR350 Up Cut Saw 4 HP Motor (230v/3ph) Variable Feed Speed This was a demo machine. Ready to ship!

Stromab TR450 Upcut Saw Demo unit - very low usage!

Superfici Flat Line Will be removed from service by the end of January 2024. Still under power.

Superfici Compact Finish Line. Ovens and pumps included More info and photos coming.

Superfici Finishing Line 1 x 0000 GENERAL FEATURES OF OFFER Coatings : Universal Drying results vary according to the coating. Workpiece Dimensions (Approx.): Min. - max. length: 300 mm (12") - 2440 mm (8') Min. - max. width: 25 mm (1") - 1300 mm (51", 4' nominal) Min. - max. thickness: 3 mm (1/8") - 80 mm (3-1/8") Min. - max. weight: XX kg - XX kg TO BE ADVISED MACHINE SPECIFICATIONS: Passline Height : 900 mm Operating side: RH, as viewed from inlet of line. LH available. Speeds: Mechanical speed : 2-6 m/min (6.5 - 19.5 fpm). Others available. Electrics: Sprayer is explosion proof. All other machines and all control cabinets are not explosion proof and must be placed outside any hazardous area. Voltage: 480 V / 3 Ph / 60 Hz (To be confirmed). Manufactured with UL norms components. Compressed air : 6 bars (90 PSI). See individual machine descriptions for consumption. Thermal connection - electric coils. These general features supersede the individual machine specifications in the event of any disagreement. MACHINE SPECIFICATIONS: 1 1 x 040201 AUTOMATIC SPRAYING MACHINE "COMPACT SPRAY Plus / R" With combined lacquer recovery system. Central belt conveyor in the spray area in special material, to work with lacquers and stains, and a patented combined lacquer recovery system for recovery and cleaning of the conveyor. Technical data: - Belt conveyor overall width 1700 mm - Infeed roller conveyor length 890 mm - Outfeed roller conveyor length 595 mm - Total machine length 3385 mm 1 x 040200 GENERAL DESCRIPTION The automatic through-feed spraying machine mod. "COMPACT SPRAY Plus" consists of: Infeed and outfeed driven roller conveyor system. Central belt conveyor in the spray area. The conveyor system can be in the following two options: - code 040201: with conveyor belt in special material, to work with lacquers and stains, and a patented combined lacquer recovery system for recovery and cleaning of the conveyor. The recovery system is mounted on trolley and extractable from the machine to make cleaning operations easier ; Lacquer application system consisting of a reciprocator with double arm driven by brushless motor and sliding on a high precision prismatic guide. The two arms are equipped with guns holder supporting up to max four guns each with two lacquer circuits (with possibility to install a third circuit). Based on the type of product as well as the grammage to be applied, it is possible to use three different types of guns (not included in the supply): - low pressure guns - airmix guns - airless guns Booth, in welded and painted steel framework, with glass sidewalls opening on both sides. The booth is also equipped with an inspection window on the work piece infeed side as well as an illuminated wall on the workpiece outfeed side. The pressurization system consists of two air intake blowing fans combined with a pre-filtering system, allowing easy access for inspection, as well as a filtering roof inside the

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

Tregarne Wood Welder New in Box

Thermwood Model M90-510 5-Axis CNC Router Less then 20 hours on this system - only installed and training. Ready to be removed!

Table Size: 5' x 10' Spindle: 18 HP HSD Max. Spindle Speed: 18,000 RPM Number of Axis: 3 Gantry Clearance: 10.5? Z-Axis Stroke: 6? Power: 460 V, 3 Phase Approx. Shipping Weight: 12,000 Lbs. Approx. Shipping Dimensions: 7' W x 16' L x 8' H Equipped With: Roller hold down 5 position Typewriter Arm Style Tool Changer Daylight touch off sensors Equipped for Vacuum Hold Down Windows 2000 Operating System

Thermwood C42 CNC Router (2) 5'x5' Tables It has 2 large routers, 4 smaller routers, and 2 aggregate heads in the turret Travainni Vacuum Pump Note from Seller: Includes two shaper heads that are not mounted into the turret and one pneumatic drill head that is not mounted into the turret. I also have one seat of Microvellum cabinetry program that I will transfer to you along with the purchase.

Thomas Return Conveyor This was used behind a Holzher Edgebander

Tidland 470 Sander This system was used in a particle board plant that has been closed around 10 years.

Automated push feed saw system for fast and accurate cutting of wood and plastic Adjustable cutting envelope so you can set the envelope to the needed width of the material you are cutting, whether single piece or pack Tigersaw 1000's Dynamic Optimization software give you the best yield by determining the optimal cutting order from your parts list (Will cut the mark) Value based optimizing allows the operator to value items in a cut list individually Download parts files to Tigersaw 1000, comes with TigerLink 6 (Tigerstop's cut list downloading software) Accuracy: +/- .012" Push capacity: 90 lbs.(on flat tables) Cutting envelope with 450 mm blade: 1" x 16" up to 5" x 6" Cutting envelope with 500 blade: 1" x 16" up to 6" x 6" Maximum clearance length for loading: 12' Material feeds right to left 24" wide x 18' long flat infeed table 24" wide x 12' long roller outfeed table Complete guarding of the saw blade area, safety interlocked guard door and saw blade door (neither can be opened while running) Saw motor: 10 hp Dust collection requirements: 600 cfm (4" dust port) Air requirements: 85 psi (water and oil free air) Electrical: 15 full load amps on 460 volt INCLUDES: Tablet package: TigerTouch software loaded onto a Surface Pro tablet. Includes downloading software (DNLD), Dynamic optimization software (OPT), and TigerSET software (SET). Label printer

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

Single Head Top and Bottom Sander

Timesavers Model 2331-04-334 3-Head Orbital Sander 43" Machine