Verville VP400 Bagger Includes: Bag Placer & Automatic Bag Sealer 92" Tubes 575v/3PH NO infeed auger or conveyor included.

Verville VP400 Auto Bag Sealer Auto bag placer Tube size: 15.75" x 11.5" New air lines, contacts, sensors

Verville VP300 Bagger

VIET Planer Sander Sander model S2 321 HR/KRT ( 2018 ) !st head planer with helical insert cutter knives 30 HP 460 volts 2nd head drum contact roller 3rd head combination drum rollers with finish platen Both sanding heads run by 30 HP motor 460 volts Adjustable rubber coated pressure rollers Opening capacity range 1/8” to 6” Sanding belt size 44” x 103” Feed speed 19 to 52 FPM Electronic digital readout with auto thickness positioning Disc brakes on each machining station Front and rear emergency push buttons Electro pneumatic sanding belt tracking This machine has low hours as owner only ran half days first year and less after next years

Viking Sentinel Nailing System Per seller: Machine was idled several years ago. Was functioning at that time. Missing one overload relay in main control cabinet which we can provide info. Other than that, should just need cleaning and a little TLC. Estimated footprint 13’ X 26’ not including area for raw material. Volume totally dependent on number of boards and condition, new or used, bowed are straight, etc. Right Hand Setup 208 V (3PH) 4th Stringer Tooling Wing Pallet to 4" Automatic Pallet Stacker

(2) Viking Nailers ready to ship! Viking 304A and 314

Viking Champion Classic 304A Pallet Nailer Manufacturer’s Specs: Produces Upwards of 500 Pallets/Shift • Single Operator Machine • New and Reclaimed Lumber Can Be Used For Pallet Productions • 3 Stringer Standard • 60” Standard Stringer Length • Automated Pallet Turnover • Automated Stacking • Automatic Pneumatic Filter Drains • Compensating Bulk Nail Chucks • Programmable Controllers • Manual Nail Positions • Hydraulic Nailing • English/ Spanish Operator Screens • Direct Modem Link For Remote Diagnostics

Viking Champion 304A Pallet Nailer Good Working Condition Left Hand Setup Outfeed Roll Case

Visionary Trim Saw

Vitap Forma Boring Machine 21 Vertical Spindles 21 Horizontal Spindles Approx $1000 worth of carbide bits DUAL LINE machine and there are (2) vertical lines of 21 spindles each for a total of 42 ...... PLUS an additional single line of 21 horizontal spindles!

Vitek Stroke sander Approx 8 foot capacity

Vollmer FS73F Grinder, ready to be moved!

Works well Taken out of service and stored

Vollmer Finimat Circle Saw Sharpener 120V 3 Phase

Manufacturer NV300 - With bilateral linear action providing profiling and straight knife grinding up to a max of 310 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 310 mm. Max dia of cutting circle 300 mm. Includes arbor, grinding wheel, stylus, 220 volt 3-phase

This machine is no longer needed at the current facility. Ready to load. Wadkin NNV-C Profile Grinder 3-phase Specification VISAGE - With bilateral linear action providing profiling and straight knife grinding up to a max of 335 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 335 mm. Max dia of cutting circle 350 mm. Includes arbor, grinding wheel, stylus, etc. Also included Carriage locks; Washdown facility. - per seller: Arbor on the machine itself is 1 1/4" we have a spacer we use on grinding wheels if we need to adapt them to our size arbor. Yes there is a dresser on the machine.

Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 4th head: top horizontal spindle 15 hp, 208-230/460 volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, 208-230/460 volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, 208-230/460 volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Manufacturer’s Specs Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460)volt three phase drive motor - 4th head: top horizontal spindle 15 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, [208-230/460](tel:208-230/460) volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, [208-230/460](tel:208-230/460) volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Great Condition 500 RPM Spindle speed 8 Head with jointers 1-13/16" Spindle Diameter, Belt Driven 2 bottom cutter heads with jointers-15HP/15HP 2 top cutter heads with jointers--20 HP/15HP 2 right hand cutter heads with jointers--10HP/10HP 1 left hand cutter head with jointer--10HP 1 universal cutter head--10HP

7 Spindle Moulder with Manual Bed Lubrication 6000 RPM Spindle Speed 19-91 F/Min Feed Speed Will Take 7" x 5" Lumber Specs: 1ST BOTTOM--7.5 HP 1ST FENCE SIDE--7.5HP 1ST LH SIDE--10HP 2ND FENCE SIDE--7.5 HP 1ST TOP-15HP 2ND BOTTOM-10HP UNIVERSAL-7.5 HP FEED DRIVE--3 HP BEAM LIFT--.5 HP