This is a Horizontal Band Saw Resaw Machine with Two saw heads. This is an ideal Machine for the recovery line, as it processes the slabs coming out of the Vertical Twin band saw machine “the resaw process”. It comes with an input chain conveyor, driven press rollers. Cutting Height and saw blade tensioning setting system. It also comes with main motor, motor drive panel, the Frequency inverter, gear motor drive panel. It does not include the saw blade. - Wheel blade: Ø1000mm; - Wheel blade width: 5"; - Maximum wood width: 400 mm; - Maximum wood height: 380 mm; - Minimum length of wood: 1250 mm; - Single Input table/ conveyor width: 600 mm; - Motor press roller: 1 cv 4P (2x); - With two independent infeed rollers; - Forward speed: 45-50m / min for small logs; - Main motor indicated: 2 x 60 hp - Soft starter Drive panel: included; - Servo motor thickness setting system (INCLUDED); - Main transmission belt: 3 x Channel B; Length: 6.532mm; - Width: 2.220mm; - Weight: 7655kg.

Vance PT600R8 Drum Chipper See this machine at IWF Atlanta 2024! This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. - Width of inlet: 600 mm; - Height: 300 mm; - Rotor diameter: 800 mm; - Toothed roller: 01 upper and 01 lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical gears); - Metal detector: Flat model; - Rollers motor size: 5 hp (2x); - Number of rotor knives: 02; - Wood chip size: 25 - 40 mm; - Main motor 125 hp 4P: Included; - Drive panel: Included; - Lead Time: 240 Days; - Estimated production: 55 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 850 mm; - Height: 1 .150 mm; - Overall length: 6 700 mm; - Approximate weight: 4,900 kg.

Vecoplan RG 42/60 XL 60 HP Motor 15" Rotor 42" x 52" Hopper Opening 1" Screen This machine went through a rebuild. It was not big enough for the buyers application. Available immediately.

This Grinder was recently taken out of service and was running good. No electrical controls. Ready to load.

This Grinder was recently just taken out of service. It ran very good before taken out. Does not include electrical controls.

Vecoplan Model 45/12/2VU HZF Grinder 75 HP Motor 18" Wide opening No Vibrating Infeed conveyor

Vecoplan RG52-60 U Stretch Slow Speed Grinder 60 HP Motor No Control Panel

Brand new never used!! 16’8” long 22” wide 19” height (adjustable)

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

2004 XL Specialized HG 6000 Vermeer Grinder Has a new end feed. Has less than 6000hrs ran on it. Has new hammers

Verville VP300 Bagger

Viking Champion Classic 304A Pallet Nailer Manufacturer’s Specs: Produces Upwards of 500 Pallets/Shift • Single Operator Machine • New and Reclaimed Lumber Can Be Used For Pallet Productions • 3 Stringer Standard • 60” Standard Stringer Length • Automated Pallet Turnover • Automated Stacking • Automatic Pneumatic Filter Drains • Compensating Bulk Nail Chucks • Programmable Controllers • Manual Nail Positions • Hydraulic Nailing • English/ Spanish Operator Screens • Direct Modem Link For Remote Diagnostics

(2) Viking Nailers ready to ship! Viking 304A and 314

Viking Sentinel Nailing System Per seller: Machine was idled several years ago. Was functioning at that time. Missing one overload relay in main control cabinet which we can provide info. Other than that, should just need cleaning and a little TLC. Estimated footprint 13’ X 26’ not including area for raw material. Volume totally dependent on number of boards and condition, new or used, bowed are straight, etc. Right Hand Setup 208 V (3PH) 4th Stringer Tooling Wing Pallet to 4" Automatic Pallet Stacker

Viking Champion 304A Pallet Nailer Good Working Condition Left Hand Setup Outfeed Roll Case

Viking QC306 Pallet Nailer with Stacker 4 Stringer 72" x 60" Pallets 480V Good Condition Recently Removed From Service

Viking Turbo 505 4-Stringer 72" max pallet 480 volt

Visionary Trim Saw

Vitap Forma Boring Machine 21 Vertical Spindles 21 Horizontal Spindles Approx $1000 worth of carbide bits DUAL LINE machine and there are (2) vertical lines of 21 spindles each for a total of 42 ...... PLUS an additional single line of 21 horizontal spindles!

Vitek Stroke sander Approx 8 foot capacity