Woodtech will custom build your UV Finish Line! 24” 40” and 52” Width machines available 4 Head Wirebrush Single, Double, and triple Roll coaters 4 Head buffing Brush machine Denibbers Single, Double and Triple UV drying Ovens - with rotating Bulbs for safety 1M- 4M Conveyors 480V 3phase Schneider Electronics Touchscreen Operation Interlocking We can customize these machines to fit your needs

Panel Rip Saw available in 60" and 72" width capacity - Main Motor: 40 HP (460 V) - Infeed Motor: 3 HP - Main Spindle: 74 mm - Main Spindle Speed: 2500 RPM - Blade Diameter: 205 mm - Moveable blades with locking collars - Maximum Width: 60" or 70" - (12) Rubber Hold Down Rollers - Quick Change Blade Holders - Thickness Capacity: 0-30 mm - Variable Feed Speed: 0-15 meters/minute - Anti-Kickback Safeguard Options: - Semi Automatic Hydraulic Infeed & Outfeed Tables (3000 kg) - Automatic Infeed System (including lift table)

Woodtech HD Horizontal Band SawMax. workpiece size: 300mmThickness of production board: 5–160mmWidth of conveyor belt: 375mmDiameter of saw wheel: 711mmFeeding speed: 0-15m/minHydraulic pressure: 50-60kg/cmSize of saw blade: 185” Length, 2” wide, 1.6mm thick Electrical Requirements: Voltage: 460V/60 HZ/3 phaseFull electrical load: 18.5 KWOverall dimension: 2800L x 2200W x 2000H

Wysong Model 284 Horizontal Mortiser

Yaskawa Motoman UP50N Robot YR-UP50N-A00 Payload 50kg Control Box Teach Pendant Yaskawa Motoman UP50N Robot Type: YR-UP50N-A00 Payload 50kg

Yates A20-12 Planer Infeed Deck Tilt Hoist 575 V Includes: Misc parts, heads and attachments for S4S and T&G. This system was removed from service this Spring. It is ready to load.

Used Yates American Model B-26, 24” Double Planer, 75HP top, 40HPBottom, top and bottom 10 knife cutterheads, on the fly top and bottom jointers, 3 phase 480volt electrics, slide out lower cutterhead, top fixed cutterhead, 3-3/4” thickness capacity, approx. 20HP hydraulic feed works, power bed raise and lower, sectional pneumatic chip breaker, top infeed/outfeed rubber rollers.

Planer Head Set Up Stand

The frame is a massive, compact and solid casting which takes less floor space for its capacity The feed drive is built to stand up under the hardest kind of services The feed rolls are of such design that the advantages of the open side type of construction are combined with of the advantages of the inside The top and bottom head assemblies are of the most substantial construction The top head chip breaker is made of chilled cast iron section, each section being spring loaded and adjustable The side head spindles are short and of large diameter The side head chipbreaker moves in and out with the head and is also provided with an additional screw adjustment for close setting The bedding is continuous throughout the entire length of the machine

There are two of these systems available. They were recently removed from the current operation and available immediately.

Yates American E-12 End Matcher System for tongue and groove flooring includes: Belt, Straight Line Blade, 3-blades, Infeed conveyor to end matcher, transfer conveyor from first machine to second machine, variable speed outfeed conveyor

The seller has confirmed that this Yates American resaw was in working/running condition when it was pulled from production. It is ready to load! - Vertical resaw - All parts and blades included - Approximately 35 years old - 50-60HP - 440 amp

Yuasa saw analyzer, great working condition comes with saw centers, magnifying camera and monitor.

Air Compressor Water Separator Single Phase 115V 16hz Good Condition

Recently removed from service Available immediately

This line is for sale as one lot. 1. Vertical Reciprocating Conveyor (VRC) - 106x80x72 - Roller Dimensions: 94x3 inch diameter - 72" wide roller deck 2. Chain Transfer Conveyor - Space between rollers is 4 feet (size of Transfer deck) - Rollers on each side measure 94x3. - Roller housings on each side measure 72x96x26. -Total dimensions: 72x224x26. 3. Straight chain driven Conveyor - 72x100x26 - 8' rollers 4. 360° rotating turntable conveyor -Base dimensions: 74x58 -Roller dimensions: 40x3 - Conveyor Dimensions: 72x48x26 5. Straight belt driven conveyors (4 of them) - 54x12x12 belts not included 6. Curved belt driven Conveyor - Exterior curve: 224x48x26 - Rollers are 40" long and vary from 2-4.5" wide along curve. 7. Line conveyors (2) - 144x36x24 - Rollers available for this 8. Stacked rollers -96x66x75 - Roller dimensions: 80x3 9. Straight Gravity Rollers (18 of them) - 148x36x6.25 These rollers were stacked 4 high. Legs are available to stack them or they will work in line. 222' run consisting of 18 pieces. 10. 32' decline belt conveyor - This has damage. See last photo.

60" Pallet DIsmantler Motor 10 HP, 220/440V, 3 phase Switch on/off Band saw 228” long x 1-1/4” wide Table dimensions: 60” width x 48” depth Maximum size pallet to dismantle: 60” wide x any length Maximum distance between the horizontal bandsaw blade from table: 1” and up to 3” if the table stop end is cut. Machine dimensions: 115” length X 52” width x 55” height Weight 1,050 lb.

4- Head customer built resaw 6" Wide belt Hydraulic hold down rollers 15 HP Motors on each head Pneumatic tension

Single Head Pallet Notcher - New with warranty! 7.5 HP Motor 220/440 3PH Maximum Notch Size: 9" x 2-1/2" x 1-5/8 Power switch with magnetic starter Cutterhead with 4-stright HSS knives (optional 40 knife cutterhead) Dimensions: 48" L x 36" W x 40" H

Single Head 4 blade Notcher: custom built, lightly used Motor 10 HP, 220/440V, 3 phase Maximum notcher size 9” long x 2-1/2” height x 1-5/8” depth Cutterhead with 4 straight HSS knives installed