Simonds Band saw leveler. Comes with pallet of spare parts.

Good Condition Ready to Load

Good Condition Used Regularly

Simonds RMO 942 Auto Leveler 480V Excellent Condition

Morgan Unscrambler - Hydraulic Drive Cant Chop Saw - 20" Blades, 6"x9" Capacity, 10 HP Motor, Pneumatic Cycle, Fixed Stop Smith Resaw - 15 HP Motor, 13'2" x 1.25" Bands, variable feed speed - MISSING drive motor and gearbox for the feed belt. Includes: Powered infeed conveyor leading to the resaw with VFD. Machine required 480v/3Ph for saws, 240v/1Ph for VFD units and controls. All control contacts are contained in a single box. All wires were labeled upon removal.

2018 Snorkel Scissor Lift 32ft. 211275AH

Soderhamn 48" Chipper M671 Diesel Engine Mounted on trailer

New Tires Everything Works on this trailer LED lights on back

4000# capacity 96” x 64” table size raised height 38-1/2" Lowered height 14-1/2" pneunatic operation Rotatable table 360 degrees safety skirts

PalletPal Spring Lift Table Specifications Load capacity 400 to 4500 lbs., depending on springs Load size .......50" wide x 50" long x 72" high (max.) Length 45 1/4 inches Width (base frame) 36 3/4 inches Compressed height 9 1/2 inches Extended height 27 3/4 inches Rotating ring, outside diameter 43 5/8 inches Rotating ring, inside diameter 40 5/8 inches Adjustment for sloping floors Can adjust for floor slope up to 1:25 using optional adjustable feet 4 Available

Qty 4 Thermostats attached to 2 heaters

The seller has confirmed that this is in fair working/running condition and it is ready to load! - Cross cut panel saw

20’ speed cut system. Was pulled out of production September 26th.

Sprout- Waldron shaker screener, was running when pulled out of production.

(2) Sprout Waldron Pellet Mills 125 HP Motors Systems were tested - then painted and never put into production. Seller ran wood pellets and pine

PELLET COMPANY EQUIPMENT - Everything has already been dismantled and loaded into trailers. They are ready to ship! Selling as one lot. Owner will not separate. Pellet Company & Equipment - (2) Bagging line – CableVey system for dust free environment - Auto Sealer for bagging - Bagging System with complete with all conveyors - Mixer to custom blend pellets - 150 HP Sprout, with conditioner - Bench Industries grain cleaner - $20k bag inventory – form fill ready - Shrink Wrap machine for pallets - 5 Ton scale for pallets - Bulk Totes filling lane - Indoor Pellet tank storage for bagging - 50 tons on floor in bags & totes Trailers & Semis - 1985 Kenworth Semi with wet kit - 53’ Walking floor with auto tarp from Prairie Trailer 2022 - 53’ Open Tarp Trailer - 48’ 3 box trailers

Sprout 501H Pellet Miill New 100 HP Motor New: SS Door, Shroud, Main Shaft/Die Housing, 14-Vbelts

Sta dard Tools & Equipment Paint Booth

Stanza STS300-6 Linear Spraying Line Includes pumps and guns. ( See photos description ) Stanza stain wiping machine

STEFANI SOLUTION 8600 CNC EDGEBANDER CNC HORIZONTAL & VERTICAL POSITIONING, STANDARD STATIONS, PRE-MILL, ROUGH & FINE TRIM STATIONS, CORNER ROUNDING, MX80 HSK MILLING UNIT, RAS/S & RCA/2C SCRAPING UNIT, SP/F TOP & BOTTOM BUFFING EDGEBANDING THICKNESS: 0.4MM – 22MM PVC & ABS IN COIL OR STRIPS HPL STRIPS SOLID WOOD UP TO 22MM PANEL HEIGHT: 10 - 60MM (3/8” MIN – 2 3/8” MAX) MINIMUM PANEL LENGTH: 140MM (5 1/2”) MINIMUM PANEL DIMENSIONS: WITH MANUAL IN-FEED LENGTH WISE : WIDTH X LENGTH90 X 220 MM (3 1/2" X 8 3/4") CROSS WISE : WIDTH X LENGTH 220 X 135 MM (8 34" X 5 3/8") FEED SPEED: 12 - 25 M/MIN (40 - 82 FT/MIN) MINIMUM DISTANCE BETWEEN PANELS: 650MM (25 1/2”) (32” WITH CORNER ROUNDING) MACHINE WORKING HEIGHT: 950MM – 970MM (37.4” – 38.2”)