STEFF 2044-3 Power Feeder. -- (4) 4-3/4" Dia. and 2-1/4" wide rubber feed rollers with 60-shore hardness. -- 1 HP - 2-Speed motor with forward-and-reverse. -- (4) Speeds (motor & gear) of 13 - 26 - 36 & 72 FPM. -- Feeder head rotates to any position up to a full 180°range. -- 28" Standard reach of head from base. -- Hardened steel drive gears. -- Electrostatic powder coated finish on all cast parts. -- Easy access external lubrication points for each roller shaft. -- Fully adjustable mounting column with locking joints. -- Options: Longer reach (34" & 38") from base to head; 2.5" or 3" wide feed rollers, conversion kit to belt feeder, different roller shore hardness and steel toothed rollers; please ask for prices.

STEFF 2048/1 Power Feeder(4) 4-3/4" Dia. and 2-1/4" rubber feed rollers with 60-shore hardness. -- 2-Speed - 0.75 HP motor with forward-and-reverse. -- (8) Feed speeds of 6 - 13 - 16 - 21 - 36 - 42 - 54 and 102 FPM. -- Feeder head movement in any position up to a full 180° range. -- 20" Standard reach of head from base. -- Hardened steel drive gears. -- Electrostatic powder coated finish on all cast parts. -- Easy access external lubrication points for each roller shaft. -- Fully adjustable mounting column w/locking joints. -- Options: Longer reach (34" & 38") from base to head; 2.5" or 3" wide feed rollers, conversion kit to belt feeder, different roller shore hardness and steel toothed rollers; ...please ask for prices.

STEFF 2048/3 Power Feeder (4) 4-3/4" Dia. and 2-1/4" rubber feed rollers with 60-shore hardness. -- 2-Speed - 1 HP motor with forward-and-reverse. -- (8) Feed speeds of 6 - 13 - 16 - 21 - 36 - 42 - 54 and 102 FPM. -- Feeder head movement in any position up to a full 180° range. -- 20" Standard reach of head from base. -- Hardened steel drive gears. -- Electrostatic powder coated finish on all cast parts. -- Easy access external lubrication points for each roller shaft. -- Fully adjustable mounting column w/locking joints. -- Options: Longer reach (34" & 38") from base to head; 2.5" or 3" wide feed rollers, conversion kit to belt feeder, different roller shore hardness and steel toothed rollers; ...please ask for prices.Add $ 100 for 230 V single phase option

SULLAIR ES8-30H/A 30 HP Single-Stage Fluid Rotary Screw Air Compressor, with 53,186 Run & 49,602 Load Hrs. (As of 11/2023) Specifications: Cap. 111 ACFM. Rated pressure 60 - 125/135 PSIG. Noise level 85 dBA. Equipped with: E-Profile rotor design air end. 30 HP 3,530 RPM Motor. Air-cooled aftercooler. SULLAIR “SUPERVISOR II DELUXE” Microprocessor controller & graphic monitor system, with LCD Display, Touchpad, Constant pressure & temperature readout of pressure, Power failure auto restart, & Automatic start/stop. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

SULLAIR ES8-30H/A 30 HP Single-Stage Fluid Rotary Screw Air Compressor, with 53,186 Run & 49,602 Load Hrs. (As of 11/2023)Specifications: -- Cap. 111 ACFM. -- Rated pressure 60 - 125/135 PSIG. -- Noise level 85 dBA.Equipped with: -- E-Profile rotor design air end. -- 30 HP 3,530 RPM Motor. -- Air-cooled aftercooler. -- SULLAIR “SUPERVISOR II DELUXE"; Microprocessor controller & graphic monitor system, with LCD Display, Touchpad, Constant pressure & temperature readout of pressure, Power failure auto restart, & Automatic start/stop.

SULLAIR LS-10, 30 HP SCREW AIR COMPRESSOR: -- Specifications:30 HP Motor, rotary screw air end, approx. 115 PSIG - 125 PSIG max; Mounted upon 150 Gal. receiver tank.Approx. Dimensions: 64" x 32" x 65"; Approx. Weight: 2,500 lbs. -- 2,630 Approx. total operating hours. Hour meter: Inoperable.

SULLAIR 10B-50 ACAC Rotary Screw Compressor (Open Type)Specifications: -- 50 HP - 1,770 RPM Motor, rotary screw air end, 100-110 max. PSI, approx. 180 ACFM; (2) asymmetrical lobe profile rotors only make contact on a lubricated pitchline to virtually eliminate cap. or efficiency loss. -- Equipped with: -- Tapered roller bearings on discharge and cylindrical bearings on inlet for high load carrying capacity. -- Pressurized fluid lubrication & cooling of Compressor with rigid piping & tubing; efficient 2-stage air/oil separation with replaceable element. -- Spin-on fiberglass fluid filter, Heavy Duty inlet air filter, cap. modulator stabilizes system pressure and matches output to demand (minimizes need for air receiver & reduces wear caused by start/stop). -- Includes: -- Electro-mechanical gauges & controls, air after-cooling.

SUMMIT PR-9S 2-Ram Horizontal Baler -- Motor: 60 HP. -- Main Cylinder: 9". -- Eject Cylinder: 8". -- Feed Opening: 60" x 44" x 46". -- Cranston Wire Tie. -- Infeed Conveyor. -- Loaded onto your Truck.

SWEED 517XHD BANDING CHOPPER --The Model 517 XHD provides a large cutting capacity. This is the chopper of choice for custom applications or for operations converting substantial quantities of linear scrap materials. --Prepared for an abusive environment, the 517 XHD has a strong 1/2"; plate steel housing. It also features a magnetic starter to protect workers from an unexpected restart after loss of power. The powerful air-activated feedworks is controlled with a footswitch for operator safety and is also capable of despooling scrap materials from reels. --This machine can chop the following:Up to 1 ½"; x .046"; band saw bladesUp to 2" wide steel banding

SWEED MODEL 517 SCRAP CHOPPER With Dump HopperFeatures: --The Model 517 XHD provides a large cutting capacity. This is the chopper of choice for custom applications or for operations converting substantial quantities of linear scrap materials. Prepared for an abusive environment, the 517 XHD has a strong 1/2"; plate steel housing. The 517 XHD also features a magnetic starter to protect workers from an unexpected restart after loss of power. The powerful air activated feedworks is controlled with a footswitch for operator safety, and is also capable of despooling scrap wire and cable from reels. --Additional safety options are available. Material Reference The recommended model of scrap chopper is determined by scrap size, scrap volume, and requested custom features. Please consult a SWEED representative to determine the appropriate scrap chopper for your application.» High-tensile bale wire» Small, solid, aluminum and copper bars» Jacketed and non-jacketed wire and cable» For other materials, consult SWEED --Electric Motor 5 HP --Infeed Opening 6 "; W x 1 "; H Cut Length 3 ½"; standard (smaller cut lengths available with different knife configurations) --Number of Stationary Knives 1 --Number of Rotating Knives 1 standard --Overall Chopper Dimensions 56"; L x 34"; W x 30"; H --Chopper Weight 1,492 lbs --Chopper Shipping Weight 1,577 lbs -- Include Stand and Gaylord

TANA- SHARK 440DT, ... Portable Dual Shaft ShredderSpecifications: -- Approx. 3900 Hours and New in 2015 --Bolt-on cleaning combs for easier maintenance --Magnet conveyor improvements - Discharge side to be selected from TCS + hydraulic magnet adjustment during operation --Rated power (SAE J1995) 399 kW (535 bhp) @2100rpm --Nominal torque 324,530 ft-lbs 440 kNm --Rotor length 9 ft 10 in --Number of rotor knives 33 / 44 --Screen sizes Available from Tana- 1.9", 3", 3.5", 3.9", 4.3", 4.7", 5.5", 6.6", 8.7", 10.8" --Screen area 29.6 sq ft

DONALDSON-TORIT: 376RFW-10 or 12: Dust Collector45,000 CFM @ 9.7:1 Air-to-cloth ratio; 140" dia. round baghouse with: (376) Filter bags of 10' length (oval bags provide for radial movement of bag during cleaning for longer life); total 4,632 sq./ft. filter area. -- Filtration media cleaning via: Floor mounted 7-1/2 HP medium pressure Air Pump (eliminates the need for compressed air; can be susceptible to condensation & freezing); 36" x 65" return air outlet; 48" x 48" inlet for dust laden air. -- Includes: Rotating cleaning air manifold driven by 1/3 HP motor; (1) NEMA-9 solenoid & diaphragm valve, which rotates over the bag openings; walk-in plenum for bag access/maintenance. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed; walk-in access door at top of ladder. -- Equipped with: Structural steel support; maintenance platform; caged ladder; bolt-on involute arm; explosion doors (need to be replaced). -- Includes Backward inclined FAN EQUIPMENT: Size 7 BCS floor-mounted Fan set at 45,000 CFM @ 15" SP; belt driven at 1,485 RPM; powered by a 200 HP TEFC Motor via OMRON/IDM E7 Series Inverter. -- 24" Rotary Air Lock at the bottom of the 60° hopper. -- Complete with: Pictured electrical controls are included. -- NOTE: New 200 HP electrical motor was replaced recently. -- Unit had an accidental fire at bottom section near Hopper causing the explosion doors to burst. Unit still working as they are not returning the air. Can be sold with or without replacement of doors; cost of which is negotiable. -- Professional dismantling and rigging available at extra cost. Please call!

TORIT - CHECKER BOARD: Control PanelTORIT Checkerboard Control Panel for a "DFT3-18" Dust Collector up to a 25 HP Blower.Includes -- Start/Stop push control buttons for Dust Collection System. -- Electric disconnect to shutdown power if needed. -- HEPA Filter pressure gauge. -- Alarm with light when dust filters require cleaning. -- Pressure gauge showing the air flow in the system. -- Air pressure pulse cleaning controls to clean dust from filters. -- Control box mounted on legs.

TORIT 460-IRD-20 Dust CollectorAn easy & economical solution for a wide range of wood dust collection applications. Downflow air pattern allows airflow & gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure drop.Specifications -- 20 HP Direct drive; floor mounted blower. -- 1/3 HP Shaker motor with auto controls. -- Fan inlet: 17". -- CFM: 7,000. -- Set of new filter bags. -- Steel elbow from fan to Collector; Motor Starter included. -- Existing ductwork available as shown in photos. Collector has been disassembled for shipment.

TORIT 360-IRD-15 Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Down flow air pattern allows airflow and gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure dropSpecifications: -- 15 HP direct drive, floor mounted blower. -- 4,800 CFM @ 8" wg, 4,050 CFM @ 9" wg, 2,400 CFM @ 10" wg -- (21) Dura-life filter bags with a cloth area of 192 sq. ft. -- (3) Collection points for plastic collection bags.

TORIT - 460-IRD-20: Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Downflow air pattern allows airflow & gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure drop.Specifications -- 20 HP Direct drive; floor mounted blower. -- Fan inlet: 17". -- CFM: 7,000. -- Set of filter bags. -- Steel elbow from fan to collector. Motor Starter included.

TORIT-DONALDSON ADMC AD8 DRYFLO Cartridge Dust Collector. A Mist collector designed for long-lasting high collection efficiency capture of coolant and machining oil mists in metalworking applications. Even smaller amounts of dust can be filtered in the dirty air stream. -- DRYFLO is a proprietary cartridge which outperforms electrostatic precipitators and mist collectors utilizing standard HVAC envelope and cassette filters. Filter unit features a unique air-side filter retention system allowing for quick filter changes with minimal worker contact with collected oil. -- Also feature three-stage Filtration via a.) prefilter, b.) wrap allowing, c.) the filter cartridge to drain and coalesce smaller coolant mist droplets in to larger droplets. Plus optional fourth stage HEPA filters available for applications where smoke exists or additional efficiency of discharge air is required. -- Overall data: Capable of 17,600 CFM; (8) Filter Cartridges, 1,760 sq. ft. of filter area, -- Complete with: Ground mounted fan powered by a 40 HP motor, belt-driven. Fan includes a variable volume inlet. In prior application clean air was not retruned to building. -- Blower currently setup for approx. 15,000 CFM with 40 HP, Baldor Super-E, 324T frame, 1.780 RPM motor. -- Enclosure dimensions: 133" long, 68" deep, 160" high. Filter weight is 7,300 lbs.

TREMZAC 248-TR-CO Portable Shaving Mill [email protected] supply; 65 HP from P.T.O. of tractor at 540 RPM (not included ). -- Emergency shutdown included. -- Log; 5" to 22" in diameter x 96" long. -- Capacity ( shaving ) 5 to 19 cubic yards/hour. -- Hopper Magazine; 24" wide x 96" long. -- Double Axle Trailer with hydraulic brake included. -- Cutter head 24" with (8) knives -- Dimensions; 7' 3"' wide x 31' 3" long.

TYLER - 2400: Slat-Wall Machine -- SpecificationsProduces T-slots "Slat-Wall" for architectural/store fixture panels.48" x 97" Max. panel capacity., 24" x 24" min. cap., panel thickness 1/2" to 1-1/2". Machine capable of processing up to (40) panels/Hr; depending on material density, thickness, and the slot profile. -- Equipped with:Machine is currently setup with: (18) Router spindles on 3" centers.Spindles are driven in groups of (3) with: (6) 7-1/2 HP - 3,450 RPM Motors that drive the (18) router spindles; all router spindles rotate @ 15,400 RPM.Machine can accept up to (21) router spindles & the additional spindles can be activated by adding (1) additional 7-1/2 HP - 3,450 RPM motor. -- Machine Operating SequencePanels remain stationary on top, pneumatically clamped in place while the bottom mounted router bank traverses the full length of the panel with a high-speed return,Variable feed speed control, router assembly traverses on ground & polished rails with chain drive.Panels are positioned along the 8' rear edge fence line; distance from the panel edge to the centerline of the 1st cut can be adjusted from 0.0" - 3" (1 router spindle pitch). -- Operator & Machine ControlALLEN-BRADLEY Electrical controls for the machine cycle; "setup" mode of operation.Machine cutting cycle is initiated by: 2-Hand Operator safety buttons located on the right front of machine. -- Complete with:Overhead holddown assembly with: (2) Large air cylinders; (6) arms with spring loaded clamping pads hold the panel in place.Panels are loaded from the 8' front and exit to the side for easy unloading. -- Options Include: Assortment of used "Diamond Tooling" (diamond router bits) Assortment of extra motors Spare parts Service manual & docs. -- Actual Model: TYLER 2400

UMP - BP 450 A: 450 kG/Hr Briquette PressSpecifications: -- Cap. 450 kG/Hr (992 Lbs). -- Max. pressure: 1,700 kG/cbm (24,175 PSI). -- Max. chip moisture content: 15%. -- Max. chip size: 15 mm (0.59"). -- Wood shaving to briquette ratio: 10 to 1 (using mahogany). -- Briquette configuration: Rectangular. -- Briquette length: 40 - 105 mm (1.57" - 4.13"); Briquette width 150 mm (5.91"); Briquette height: 60 mm (2.36"). -- Briquette heat energy: 4,200 kCal/kG (7,558 BTU/Lbs). -- Hopper size: 31"; x 36"; x 36"; with: 1-Side sloping so cutaway from cube of 18"; x 36";; mounting flange at top allows additional capacity to be added.Equipped with: -- Automatic material density adjustment. -- Automatic hopper shutoff. -- SIEMENS PLC Control.