AMERICAN DC 5043-830R Auto-Tie Horizontal BalerKey Technical Specifications: --Motor: 30 HP power unit --Main Cylinder: 8-inch bore (heavy-duty compression) --Feed Opening: Generous 43" × 50" (or 63" × 43" depending on the exact sub-variation), perfect for bulky cardboard --Tying System: Fully automated 5-wire swing-away tier that automatically inserts and twists the wire --Controls: Programmable Logic Controller (PLC) for efficient, streamlined diagnostics and operation [1, 2, 3, 4, 5]The American Baler Model DC 5043-830R is a robust, open-end single-ram horizontal auto-tie baler widely used in distribution centers, recycling facilities, and waste management operations. It is specifically engineered for high-volume processing of materials like old, corrugated containers (OCC), paper, and plastics. [1, 2, 3]

AMERICAN BALER - 6042H-830: Auto-Tie Horizontal Baler with Shear BladeSpecifications -- Cylinder: 8". -- Main motor: 30 HP. -- Feed opening: 60" x 42".Equipped with: -- PLC and push-button controls. -- Shearing blade.

ANDI - STRATOS PRO CNC Router. - 5' x 12' with: ATC, Boring -- Specifications• 5' x 12' Moving gantry; stationary table design in a front-to-back configuration. • (1) 15 HP HSK 63F Liquid Cooled Router Head• (1) 10-Position Automatic Tool Changer• (1) Multiple Spindle Boring Head• Table size: 3700 mm x 1600 mm (146"; x 63";).• Pop-Up Positioning Pins: 15 (12+3).• Vacuum Zones per Table: 2.Axis stroke:• X axis: 3900 mm (153";). Y axis: 2180 mm (86";). Z axis: 350 mm (13.8";).Maximum Rapid Rate:• X axis: 80 meters/min (3,150";/min). Y axis: 60 meters/min (2,360";/min). Z axis: 30 meters/min (1,181";/min).Maximum Feed rate:• X-axis: 80 meters/min (3,150";/min). Y-axis: 60 meters/min (2,360";/min). Z-axis: 30 meters/min (1,181";/min)Spindle #1 - Router Spindle:• Spindle type Anderson 4-Pole, HSK63F. Motor power 13.5Kw. Spindle speed (RPM) 1,000-22,000. 10-Position ATC plate. C-Axis for 360° Horizontal processing.Spindle #2 - Boring Unit:• Spindle type: Line Boring Unit. Motor Power: 2 HP. Spindle speed: 4,500 rpm. Vertical Drills: 10 x 6. Horizontal Drills: 4. Drill Shank Dia: 10 mm.Vacuum hold down system:• 2 Becker Pump(s): Power (per pump) 9 HP Flow (per pump) 168 cfm. Total Pressure 24" Hg (new vanes installed May 2026)

ANDI - STRATOS PRO 20' CNC Router. - 5' x 20' with: ATC, Boring -- Specifications• Axis stroke: X axis: 6,100 mm (240";). Y axis: 2180 mm (86";). Z axis: 350 mm (13.8";).• Maximum Feed rate: X-axis: 80 meters/min (3,150";/min). Y-axis: 60 meters/min (2,360";/min). Z-axis: 30 meters/min (1,181";/min)• Spindle #1 - 18 HP Air Cooled HSK63F Router Head• Spindle type Anderson 4-Pole, HSK63F. Motor power 13.5Kw.• Spindle speed (RPM) 1,000-22,000.• (1) 10-Position ATC plate. • Spindle #2 - Line Boring Unit. Motor Power: 2 HP. Spindle speed: 4,500 rpm. • Spindle type: Vertical Drills: 10 x 6. Horizontal Drills: 4. Drill Shank Dia: 10 mm.Features• 5' x 20' Moving gantry; stationary table design in a front-to-back configuration. • (1) 18 HP Air Cooled HSK63F Router Head.• Full Torque is achieved at 9,000 RPM• Full HP is achieved at 12,000 RPM. • (1) 10-Position Automatic Tool Changer Plate• ATC mounted on the spindle carriage for "On the Fly" ATC• Tool length touch probe• (1) Drilling block with 16 independently selectable Vertical spindles & 4 horizontal boring spindles for all 4-edges• Table size: 6100 mm x 1600 mm (240"; x 63";).• Pneumatic Pop-Up Positioning Pins: 15 (12+3).• Vacuum Zones per Table: 2.• (2) Becker Vacuum Pumps: Power (per pump) 9 HP Flow (per pump) 168 cfm. Total Pressure 24" Hg

ANDI NC-3116TC4 5' x 10' CNC ROUTER (MULTI-SPINDLE AND ATC):Specifications:• 5' x 10' (63" x 122") Stationary bridge,• Moving table design in a left-to-right configuration• 2 - Zone phenolic vacuum table.Equipped with: • (4) 15 HP ISO 30 type ATC spindles, with air-oil mist lubricated,• Infinitely variable spindle speed from 3,000 - 18,000 RPM,• Each Spindle with a 4-tool ATC carousel.• All axes are driven by precision ground ball screws with FANUC brushless AC Servo drives• Servo drives ride on rectangular box ways with linear tank type bearings,• Rapid feed rates up to 1,800 IPM,• Cutting feed rates up to 1,000 IPM;• Linear, & circular interpolation,• Automatic acceleration & deceleration.• Ball screw and way bearings are serviced by an automatic lubrication system.Operator Interface:• ANDI/FANUC Controller with a WINDOWS front end,• RS-232 Interface for communication with a PC,Includes:• (1) 40 HP "DEKKER" Liquid ring vacuum pump, • Tools, Tooling, Documents & Manuals• Actual Model is ANDI NC-3116TC4 5' x 10'

ANDI - STRATOS PRO: CNC Router. - 5 x 10 with: ATC, Boring -- Specifications5' x 10' Moving gantry; stationary table design in a front-to-back configuration. Double-zone phenolic vacuum plenum; (11) pop-up pins for part location within the table; (3) around the table perimeter for nested based manufacturing. --Equipped with: (1) 15 HP HSK-63F Type grease lubricated spindle with "C" axis; variable speed from: 1,000 - 24,000 RPM; 15 HP is achieved at: 15,000 RPM. -- ATC with: 8-Station tool carousel. -- (1) 9-Spindle vertical drill block. -- All Axes Powered by FANUC brushless AC Servo motors. X-Axis is driven by: Twin synchronous helical rack & pinion drive. Y- & Z-axis by: Precision ground ball screws with anti-lash ball nuts. -- All axes ride on: STAR linear guides; recirculating linear roller bearings for: Rapid feed rates up to 3,150 IPM on the X-axis; 2,362 IPM on the Y-axis; 1,181 IPM on Z-axis. -- Motion ComponentsServiced by an automatic lubrication system.Router spindle features an automatic damper dust collection shroud. -- ControlANDI - FANUC "0i" CNC PC front system with: WINDOWS XP & PLC Control; color monitor; large hard disk for program storage; USB & RS-232. -- FeaturesLinear, circular & helical interpolation; automatic acceleration & deceleration; fast corner function; handheld teach pendant; absolute & incremental programming; feed rate; spindle speed manual override. -- Includes(1) 10 HP Vacuum Pump; manuals; documentation.

ANDI - STRATOS PRO: Full Auto. MLS x 6 CNC; 5 x 12 with ATC/Boring/Loading/Unloading5' x 12' Moving gantry; stationary table design in a front-to-back configuration with: Double-zone phenolic vacuum plenum; (11) pop-up pins for: Part location within the table; (3) pop-pins around the table perimeter for nested base manufacturing.Automatic loading from: Self-indexing Scissors Lift Table and Unloading System onto Belt Conveyor Table (Sweeping Arm + Loading Vacuum cups). -- Equipped with:(1) 15 HP HSK-63F Type grease lubricated spindle; variable speed from; 1,000 - 24,000 RPM; ATC with; 10-Station tool carousel. - (1) 10-Spindle L-shape vertical drill block. -- All AxesPowered by: FANUC Brushless AC Servo motors.X-Axis. Driven by: Twin synchronous helical rack & pinion drive; Y- & Z-axis by: Precision ground ball screws with anti-lash ball nuts.All axes: Ride on STAR linear guides & recirculating linear roller bearings for rapid feed rates (up to): 3,150 IPM on the X-axis; 2,362 IPM on the Y-axis; 1,181 IPM on Z-axis. -- Motion componentsAre serviced by: Automatic lubrication system.Router spindle features: Automatic damper dust collection shroud. -- ControlANDI - FANUC "0i" CNC PC front system with: PC WINDOWS 10 & PLC control; color monitor; large hard disk for program storage; USB and RS-232 interface. -- FeaturesLinear, circular & helical interpolation; automatic acceleration & deceleration; fast corner function; handheld teach pendant; absolute & incremental programming; feed rate & spindle speed manual override. -- Includes(1) 40 HP "DEKKER" Liquid ring Vacuum Pump; assortment of: HSK-63 tool holders; assorted collets; documentation. -- Options IncludeFull auto. MLS x (6) Multizone CNC Loading/Unloading System as pictured.

BRANDT KTD 720 CONTOUR EDGEBANDER0.4 - 3 mm (1/8") Edge cap., panel thickness 5/8" - 1-5/8", min. panel length 100 mm (4") and 100 mm (4") min. width. Variable feed speeds 2-14 FPM. -- Gluing/taping unit applies glue to the edging material, presses it onto the workpiece and moves via a motorized system which is guided by the operator. -- Quick heat-up glue system,(approx. 12 minutes) w/glue tank for maintenance & glue color change. Glue temperature indicator for both the glue pot and glue roller with LED thermostat and automatic temperature reduction if the machine is idle for 15 minutes or more. Pre-heating devise for thicker PVC eding is standard equipment to allow material to more pliable. -- Automatic coil cut off devise is supplied to pre-cut the banding material to lenth. -- Vacuum table equipped with (5) pods to secure panels to worktable. -- Also equipped with BRANDT OPTIMAT F13 top and bottom trimmer Sold per pair.

BRANDT KDF 440/AMBITION 1440 Edgebander, with Pre-Mill & Corner RoundingUSAGE NOTE: Seller believes total hours & total pieces were reset, so this information in the photo of the control screen are not likely to be accurate.EQUIPMENT NOTE: Glue Pot was recently replaced with a brand new unit.Specifications: -- Edgebanding thickness 0.4 - 8 mm (0.02" - 0.31"). -- Panel thickness 8 - 60 mm (0.31" - 2.36"), Min. panel length 160 mm (6.30"), & Min. panel width 70 mm (2.76"). -- Feed speeds: 8 - 14 MPM (27 - 45 FPM), 11 MPM (36 FPM) with Contour trimming.Equipped with: -- Motorized infeed fence, with 0.049 kW (0.07 HP) Motor. -- Joint trimming/pre-mill unit, with (2) 2.2 kW (3 HP) - 12,000 RPM Motors, Left-hand & Right-hand rotation, & Pneumatic jump control. -- Roller separating device, with 3 mm x 45 mm (0.12" x 1.77") or 1 mm x 55 mm (0.04" x 2.17") Max. roll cutting, 0.4 - 8 mm (0.016" - 0.31") Strip thickness, & 3 mm (0.12") PVC Max. coil thickness. -- Hot melt glue application unit, with 6 - 10 kg/Hr. (13 - 22 Lbs./Hr.) Melting capacity (Depending on glue type). -- Workpiece preheating unit. -- Pressure zone, with (1) Driven & (2) Idle rollers, Timed pneumatic pressure controlled, & Servo motor positioning for programmable edge thickness changeover. -- BRANDT "POWERCONTROL PC 20+" Control, with LCD Display & Touchpad.Workstations: -- Front & Rear End Trimming Unit, with (2) 0.18 kW (1/4 HP) - 12,000 RPM Motors, 0° - 15° Automatic chamfer, Pneumatic adjustment & Activation/deactivation of edging material overhang using "POWERCONTROL" control. -- Top & Bottom Flush/Chamfer/Radius Trimming Unit, with (2) 0.55 kW (3/4 HP) - 12,000 RPM Motors, 0° - 25° Automatic tilt, Horizontal & Vertical Tracing wheels, Brushless multi-axis servo motors for positioning of work-unit & horizontal copy wheels for quick changeover, with (3) Positioning options: Profile 1, Profile 2 & Flush trimming. -- Multi-Functional Trimming Unit, with (2) 0.4 kW (1/2 HP) - 12,000 RPM Motors for leading & trailing edges vertical corner rounding of panels, Either radius or chamfer cutters can be mounted, 3 mm (0.12") Max. edge thickness. -- Top & Bottom Multi-Profile (PVC) Scraping Unit, with (2) Profiles: 1 mm (0.04") & 2 mm (0.08") or 3 mm (0.12") instead of 2 mm (0.08"), Servo control positioning of vertical & horizontal copy wheels, PVC Scrape collection box, Pneumatic adjustment using "POWERCONTROL" control, & Pneumatic disengagement. -- Top & Bottom Glue Scraping Unit, Flush on panel surface, with Floating insert knives. -- Top & Bottom Buffing Unit, with (2) 0.09 kW (0.12 HP) 2,750 RPM Motors.Complete with: -- Motorized, programmable hold-down pressure beam, & Padded sound enclosure.

BRANDT - FP 10: Corner Rounding Unit -- SpecificationsFreestanding unit for: Profiling, shaping, chamfering, or rounding most common type & shape of corner/edge on an edgebanded panel. -- Capacity: 55 mm (2-1/8") Max. panel thickness; 90 x 140 mm min. panel size; 3 mm max. edge thickness (depending on radius & edge material).Plunge in & plunge out points for tooling are: Programmable on Operator Control Panel with digital readout. -- Automatically scans profile with: SPS control; handles 90° & 180° symmetric profiles; tracing wheel & shoe follow exact shape contour of edgeband of corner. -- Equipped with: 3/4 HP - 27,000 RPM Motor; pneumatic clamping cylinder; optional 1/4 HP table mounted Buffing Wheel; electro-pneumatic operation with foot pedal control.

BRANDT - KDN 770-2C: EdgebanderSpecifications -- Hot Melt granulate quick heat up glue system; overhead glue tank for easy maintenance & glue color change. -- Automatic magazine for strip & coil: Large 800 mm dia. coil table to accommodate large coils of 3 mm PVC stock; 3 mm PVC guillotine. -- (1) Drive plus: (3) Idle rolls "pneumatically controlled" pressure sections. -- End Trimming: 0.33 HP - 12,000 RPM Motors; chamfers 0° - 15°. -- Flush Trimming. Top & bottom bevels 0° - 15° with: (4) Revolver type index presets; (2) 1/2 HP - 12,000 RPM motors; cutterheads with insert knives.Features -- Fine/Radius Trimming. Top & Bottom; bevels 0° - 15° with: (4) Revolver-type index presets; 1/2 HP - 12,000 RPM motors; cutterheads with: Insert knives for 3 mm PVC radius. -- 2-Motor corner rounding. -- Scraping Unit. Top & Bottom for: 2 - 6 mm Radius; pneumatically controlled blowoff nozzles. -- Buffing Unit: Top & bottom buffing; 1/4 HP - 1,400 RPM motors. -- Variable feed chain track speed from: 8 - 20 MPM (26 - 65 FPM); 2 HP feed drive.NOTE: Description based on: Model Type, manufacturer's plate, and information from Seller. Please inspect to confirm the required specifications. Dimensions & weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

BRANDT - KDF-550 C, ...Edgebander with Premill & Corner RoundingEdge & workpiece capacity. Edge: 0.4 - 8 mm (0.016 - 0.31"); panel thickness: 8 -60 mm (0.31" - 2-3/8"); min. panel length: 60 mm (6.29"); min. panel width: 70 mm (2-3/4").Equipped with: -- Premilling Station with: Diamond cutterheads; (2) motors @ 2.25 kW (3.0 HP) - 12.000 RPM; LH & RH rotation w/pneumatic jump control for chip free & clean panel edges. -- Infeed fence with: Servo motor positioning. -- Automatic Edge Magazine. For strip & coil stock; strips: 0.4 mm - 8 mm (0.016" - 0.31"); coils up to 3 mm PVC and "HD" guillotine. -- Pressure Section. 1st Roller driven; plus (3) idle rollers; timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover. -- Feed Speed: Variable; 8 - 14 MPM (26 - 46 FPM); 11 MPM (36 FPM) when using contour trimming. -- BRANDT "PowerControl PC 16"; memory: 256 MB RAM; 1 GB Flash Card Drive; Operator control panel with: 22" Color HD wide screen; soft keypad; internal modem for remote diagnostic link.Workstations -- End Trimming; (2) Motors @ 0.35 kW (1/2 HP) 12,000 RPM; automatic chamfer from the control panel: 0°- 15°. -- Flush/Bevel-Fine/Radius Trimming Unit: Top/bottom (2) motors; 0.55 kW (3/4 HP) 12,000 RPM; auto tilt positioning 0° - 25°; combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels. -- Includes: (3) Positioning options: Profile 1, profile 2, and flush trimming. -- Corner Rounding Unit: (1) Motor; 0.35 kW (1/2 HP) - 12,000 RPM for leading & trailing edges; vertical corner rounding of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness. -- Scraping, Multi-Profile (PVC) Top/Bottom with (2) profiles: 1 mm & 2 mm or 3 mm Instead of 2 mm; Servo control positioning of vertical & horizontal copy wheels; PVC scrape collection box. -- Scraping Glue Unit: Flush top/bottom on the panel surface with floating insert knives. -- Buffing Unit: Top/bottom (2) motors; 0.10 kW (0.125 HP) - 2,800 RPM.Complete with: Motorized, programmable holddown pressure beam; padded sound enclosure. -- Actual Model: BRANDT, OPTIMATKDF 550 C

BRANDT KDF 780 2C EDGEBANDER WITH PRE-MILL AND CORNER ROUNDINGBasic Specifications: -- 0.4 - 15 mm (5/8") Edge cap., panel thickness 5/16" - 2-3/8", min. panel length 160 mm (6-3/8") and 65 mm (2-3/8") min. width; line control (NO limit switches) for workstation function.Features: -- Pressure Beam with motorized height adjustment for all work stations includes digital height indicator. -- PC-20 Program Control; with 12" Industrial PC flat screen 256 MB RAM, 1 GB Flash Card, with USB Port & remote diagnostic link. -- Signal infeed light to ensure proper spacing between panels. -- Quick heat-up glue system,(approx. 10 minutes) w/hopper feeder & w/glue tank for maintenance & quick glue color change. Glue temperature indicator for both the glue pot and glue roller with LED thermostat and automatic temperature reduction if the machine is idle for 15 minutes or more. -- The glue applicator roller is also reversable and retractable from the fence line. -- Automatic magazine for strip & coil (large coil table 800 mm diameter to accommodate large coils of 3 mm PVC) stock, 3 mm PVC guillotine, (1) drive plus (3) secondary rollers "pneumatically controlled" pressure section. -- Variable Feed speed 36 - 65 FPM (3 HP feed motor) -- Corner rounding station operates at 16 m/Min (52 FPM).Workstations: -- (2) Motor Pre-milling Unit; (2) 3 HP motors (12,000 RPM) to clean-up potential chipped edges. -- End Trimming: (2) 1/2 HP - 12,000 RPM motors) chamfers 0° - 15° via programmable controller. -- Pre-Trimming: Top & bottom flush/bevel trim, bevels 0° - 15° (3/4 HP - 12,000 RPM motor), with (4) postion manual index turret and pneumatic air cylinder for pre-set tool positioning. -- Fine-Trimming: Top & bottom flush/bevel/radius trim, bevels 0° - 15° (3/4 HP - 12,000 RPM motor), with (4) postion manual index turret and pneumatic air cylinder for pre-set tool positioning. -- Corner Rounding (Contour) Trimming Unit: (2) motor 1/2 HP - 12,000 RPM each motor for corner rounding for front & trailing corners on the fly. -- Profile Scraping Unit: Top & bottom for 1 - 3 mm PVC radius, depending on tooling. -- Open Space: For the ability to add a top & bottom flat/glue scraper. -- Buffing Station: Top & bottom oscillating buffing (0.25 HP - 2,800 motors). -- Hot Air Unit: (1) Hot air blower to reactivate top/bottom edge after profile scraping and buffing, restoring original edge color luster.Complete With: -- Operator control panel w/PLC (Programmable Logic Control) keypad & LED readouts. -- End trim, flush trim & fine trim and corner rounding stations have HF motors with electronic brakes. -- Original Factory machine documentation.

BRANDT KDN 520 EDGEBANDER0.4 - 8 mm (5/16") Edge cap., panel thickness 15/32" - 2-5/32", min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width; line control (NO limit switches) for workstation function. Automatic height adjustment with top pressure beam for all work station, equipped with digital height indicator.Specifications: PC-16 Program Control; with 7-1/2" VGA screen 8 MB IDE flash disk, 8 MB RAM, Internal Modem for remote diagnostic link; Signal infeed light to insure proper spacing between panels.Equipped with: -- Quick heat-up glue system,(approx. 12 Min) w/glue tank for maintenance & glue color change. Glue temperature indicator for both the glue pot and glue roller with LED thermostat and automatic temperature reduction if the machine is idle for 15 Min or more. -- The glue applicator roller is also reversible and retractable from the fence line. -- Automatic magazine for strip & coil (Large coil table 800 mm dia. to accommodate large coils of 3 mm PVC) stock, 3 mm PVC guillotine, (1) drive plus (1) split secondary roller "pneumatically controlled" pressure sections.Workstations: -- Double end trim (0.33 HP - 12,000 RPM motor), chamfers 0° - 15° via programmable controller. -- Top & bottom flush/radius trim, bevels 0° - 15° (0.5 HP - 12,000 RPM motors), -- Top & bottom scraping for 3 mm radius, pneumatically controlled indexing system; -- Top & bottom buffing (0.25 HP - 2,800 motors).Features: -- End trim & flush trim stations have HF motors w/electronic brakes; feed chain track speed 36 FPM, 2 HP feed drive. -- Complete with: Operator control panel w/PLC (Programmable Logic Control) keypad & LED readouts, and used tooling. -- Machine still in use and available time to be confirmed.

BRANDT KDF 660 Edgebander w/Premilling & Corner RoundingSpecifications -- 0.4 - 15 mm (5/8") Edge cap.; panel thickness 5/16" - 2-3/8"; min. panel length 160 mm (6-3/8") and 65 mm (2-3/8") min. width; -- Line Control (NO limit switches) for workstation function. -- Pressure beam height adjustment for all workstations via digital height indicator. -- PC-20 Program Control with: 12" Industrial PC screen; 256 MB RAM; 1 gB Flash card with USB Port & remote diagnostic link. -- Signal infeed light to insure proper spacing between panels.Equipped with: -- 2-Motor Premill unit; (2) 3 HP motors (12,000 RPM) with straight and chamfer capability; program controlled indexing from straight to bevel. -- Quick heat up glue system (approx. 10 minutes); hopper feeder & glue tank for maintenance & quick glue color change.Glue temperature indicator for both the glue pot and glue roller with LED thermostat and automatic temperature reduction if the machine is idle for (15) minutes or more. -- The glue applicator roller is reversible and retractable from the fence line. -- Automatic magazine for strip & coil (large coil table; 800 mm dia. to accommodate large coils of 3 mm PVC stock); 3 mm PVC guillotine; (1) drive plus (3) secondary rollers "pneumatically controlled" pressure sections. Workstations: -- Double-end trim with: (2) 0.5 HP - 12,000 RPM motors; chamfers 0°- 15° via programmable Controller. -- Top & Bbottom flush/radius trim; bevels 0° - 15° (0.75 HP - 12,000 RPM motor); insert knives for 3 mm PVC radius. -- Corner Rounding Unit. -- Top & Bottom scraping for 3 mm PVC radius; pneumatically controlled indexing system. -- Top & Bottom oscillating buffing (0.25 HP - 2,800 motors). -- Variable feed speed 36 - 65 FPM (3 HP feed motor).

BRANDT PROFILINE KDF 970 2C HD EDGEBANDER WITH PRE MILL & CORNER ROUNDING & 7,504 Hrs. (As of 6/2/22)Specifications: -- Edgebanding thickness 0.4 - 20 mm (0.02" - 0.79"), Including 3 mm (0.12") PVC banding. -- Panel thickness 8 - 60 mm (0.31" - 2.38"), Min. panel width 65 mm (2.56"), Min. panel length 160 mm (6.30"). -- Variable feed speeds 36 - 65 FPM (11 - 20 MPM), Max. feed speed using corner rounding units or applying solid wood 52 FPM (16 MPM). -- Working height 900 mm (35.43").Equipped with: -- Pre-milling unit, with (2) 3 kW (4 HP) - 11,580 RPM Vertical milling/jointing heads with FS Whisper Heads, Electro-pneumatic jump control, Head counter-rotation, & SIKO digital units for vertical & horizontal adjustments. -- 32-1/2" Dia. Coil table. -- Motorized infeed fence. -- Extended magazine for strips & coiled material. -- Reinforced guillotine for coiled edgebanding material, 0.4 - 3.5 mm (0.2" - 0.14") Thickness & 8 - 55 mm (0.31" - 2.17") Height. -- "Quick-Melt" Hot melt glue unit, with Heat-up time: Approx. 12 min., Pre-melt hopper feed, Quick-change hopper & tank for color changes, Reversible glue applicator roller rotation, Retractable glue roller, Infrared heating unit positioned between glue roller & pressure section to improve edge quality, and Pneumatic positioning & Locking. -- Programmable pressure section, with (1) Large driven & (4) Small pneumatically-controlled idler rolls and SIKO Digital units for adjustments. "POWER CONTROL PC 20+" Control, with 600 MHz, 256 MB RAM, USB Port, 1 GB Flash card, Internal modem for remote diagnostic access link, & 12" TFT Flat screen monitor. -- Line control (no limit switches) for workstation functions. -- Heavy-duty feed chain, with 2.2 kW (3 HP) Motor, Rubber pads, & Automatic chain track lubrication. -- Motorized top pressure beam with 0.14 HP (0.10 kW) Motor. -- Outboard panel support, with Roller guide & 1,000 mm (39.37") Adjustment. -- Sound enclosure.Workstations: -- Front & rear end trim unit, with (2) 1 HP - 12,000 RPM High frequency motors, 0° - 15° Chamfer, & Programmable pneumatic control for straight or chamfer trimming. -- Top & bottom rough trim unit, with (1) 1.86 kW (2-1/2 HP) High frequency motor. -- Top & bottom fine trim unit, with (2) 0.55 kW (3/4 HP) - 11,300 RPM High frequency motors with Electronic brakes, Servo control bevel, 0° - 25° Tilt, Vertical & Horizontal tracing, Servo control (in/out), & DFC Radius cutters. -- Corner rounding unit, with (2) 0.35 kW (1/2 HP) - 10,940 RPM High frequency motors, & Automatic 2-position edge thickness. -- Quick-change top & bottom profile scraping unit for rigid PVC edges, with Digital quick-set system for 2 - 6 mm (0.08" to 0.24") Radius, Pneumatic indexing, Servo control (in/out), & Pneumatically-controlled blow-off nozzle. -- Top & bottom buffing unit, with (2) 0.3 HP - 2,800 RPM Motors and Vertical & Horizontal tilt.Complete with: -- Original Production Instructions Manual. -- Transformer.NOTE: Air lines o

BRANDT - Ambition 1440 AT (KDF-440 AT): Edgebander (w/Premill & Corner Rounding) + "AirTec" PUR/EVA Gluing Technology -- Specifications Edge & workpiece capacity: 0.4 - 8 mm (0.016" - 0.31") Edgebanding thickness; 8 - 60 mm (0.31" - 2.36") panel thickness; 160 mm (6.30") min. panel length; 70 mm (2.76") min. panel width.Equipped with: -- Heated Adjustable Infeed Fence. Radiant Heated with: Manual adjustment. -- Joint Trimming/Premilling Station. (2) 2.2 kW (3 HP) - 12,000 RPM Motors; left-hand & right-hand rotation with: Pneumatic jump control for chip-free & clean panel edges. -- Roller Separating Device. 3 mm x 45 mm (0.12" x 1.77") Or 1 mm x 55 mm (0.04" x 2.17") max. roll cutting; 0.4 - 8 mm (0.016" - 0.31") strip thickness; 3 mm (0.12") PVC max. coil thickness. -- "AirTec" PUR Glue Application: For preglued PUR banding. -- Hot Melt Glue Application Unit: 6 - 10 kG/Hr (13 - 22 Lbs/Hr) Melting capacity (depending on glue type). -- Pressure Zone. (1) Driven & (2) idle rollers; timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover. -- Feed Speeds. 8 - 14 MPM (27 - 45 FPM); 11 MPM (36 FPM) when contour trimming. -- BRANDT "POWERTOUCH" Control with: 21" HD LCD Touchscreen Monitor.Workstations -- Front & Rear End Trimming Unit. (2) 0.18 kW (1/4 HP) - 12,000 RPM Motors with: 0° - 15° Automatic chamfer; pneumatic adjustment; activation/deactivation of edging material overhang using "POWERTOUCH" control. -- Top & Bottom Flush/Chamfer/Radius Trimming Unit. (2) 0.55 kW (3/4 HP) - 12,000 RPM Motors; 0° - 25° automatic tilt with: Horizontal & vertical tracing wheels; brushless multiaccess Servo motors for positioning of work unit; horizontal copy wheels for Quick changeover with: (3) Positioning options: Profile 1, Profile 2 & Flush Trimming. -- Multifunctional Trimming Unit. (2) 0.4 kW (1/2 HP) - 12,000 RPM Motors for top & bottom, leading & trailing edges, and corner rounding of panels.Servo Motors for: Positioning of work unit & horizontal copy wheels.Either radius or chamfer cutters can be mounted: 3 mm (0.12") Max. edge thickness. -- Top & Bottom Multi-Profile (PVC) Scraping Unit. (2) Profiles: 1 mm (0.04") & 2 mm (0.08") or 3 mm (0.12") instead of 2 mm (0.08").Servo Control positioning of: Vertical & horizontal copy wheels.PVC Scrape collection box, pneumatic adjustment using: "POWERTOUCH" Control, pneumatic disengagement. -- Top & Bottom Flat Glue Scrapping Unit. To remove excess before Buffing. -- Top & Bottom Buffing Unit. (2) 0.09 kW (0.12 HP) - 2,750 RPM Motors.Complete with: -- Rubber padded feed chain w/top idle holddown rollers; 1.5 kW (2 HP) feed motor; 32" diameter coil table; padded sound enclosure. -- Actual Model: BRANDT - AMBITION 1440 AT (KDF 440 AT).

--This machine is in Auction @ https://exfactoryauctions.com/Detail/PM-231011/event/A122024$1. --NO RESERVE! BRIANZOLA SIMCOR 10" W Rotary Embossing Press Specifications: Max. thickness 4" (Depending on head diameter). Equipped with: Slotted table, with 11-1/2” x 3/4” Adjustable left & right material guides. Fixed arbor, with 1 HP - 1,700 RPM - 260/440 V Motor & Adjustable arbor support. 19-1/4” L x Approx. 10” Dia. Motorized smooth steel feed roller synchronized with arbor, Electronically-controlled feed speeds. Complete with: 8” Dia. x 1” W Embossing Head.

BUILDERS AUTOMATION (BAM) 2220 Stair Wedge Cutter. Automatically cuts wood wedges used to lock stair treads and risers into slots in stair stringers.. -- Equipped with: 10" Dia. saw blade with 1.5 HP direct drive motor, hopper feeds material automatically, air operated with 6 CFM compressed air requirement, 1.8 Sec/stroke. -- Features: Auto-shutoff feature and capability to cut glue blocks. -- Upright guide expandable to hold up to 40 pieces of wood at one time -- Rapid changeover to cut glue blocks for more efficient operation -- Once cycle started, hands-free use for labor-saving utilization -- Enables you to easily change size or angle without tools saving time and improving productivity -- Utilizes a 1.5 HP saw that automatically cuts pieces up to 9-1/2" W x 11-1/2" L -- Operator panel includes key start and e-stop controls for the saw motor and start/stop control for the pneumatic system that coordinates all machine motions -- Capable of producing wedges of varying thickness on alternate strokes of the saw -- Scrap material is ejected under the machine, and the wedges are discharged into user-supplied hoppers -- An included discharge chute diverter separates automatically and directs wedges of different thicknesses (produced on alternate saw strokes) into separate hoppers (user-supplied) -- Sawdust carried away from the saw guard pick-up through a 3" diameter hose -- Comes with manufacturer's standard 1-year warranty -- Complete with: Self-diagnostics, built-in starter, automatic shutoff feature, air filter & lubricator.

BUILDERS AUTOMATION MFSR CNC 5-Axis Multi-Function Stair Routing Machine, fully programmable.Specifications: -- Axis Configuration: 1.) X axis; 2.) Y axis; 3.) Top Z (top router depth control); 4.) Bottom Z (bottom router depth control); 5.) Axis A (advancing of board) -- Features: Programmable Touch Screen for simpler stair characteristic input by operator; Touch Screen for landing cut both top & bottom for open box & contemporary; Two (2) high frequency routers with 7.5 HP @ 24,000 RPM fan-cooled spindles that can accommodate shanks of ½" or 3/8" diameter.Accepts one or two stringers at a time -¾", 1", 1½" thick for a total of 3" maximum thickness and 7¾" to 15¾" wide; Extra wide ¾" guide rails for more bearing surface with a 3¼" high fence. -- Includes: (5) Cylinder clamps - 3 fixed and 2 adjustable for up to 2,950 Lbs of vertical stringer clamping force. Additional 1,180 Lbs horizontal clamp force for a total of 4,130 Lbs.; Self-centering feed system on linear bearings for better support and elimination of wear on the brass parts; Accommodates staircase angles from 20° to 45° and riser kickback from 5° to 11° with landing cut; Cuts up to ½" deep in yellow pine at the maximum rate of 20" per second and an open stringer in a single cut;Programmable to cut any combination of box, contemporary, or open stairs with landing cut; Completes the top and bottom landing cut without additional handling or manual sawing. Adjustable setting for wedge fit or material variances. -- Production rate: Approx. cycle time 10 Seconds per 7/11 tread in 1 or 2 stringers. -- Comes with: Dust collection cups on each router for clean efficient operation.Manufacturer's standard 1 year. -- Overall Dimensions/Weight: Measures approx. 8′ x 6′ 5″ x 7′ high; Gross weight approx. 3,500 pounds. -- Services required: Air requirements 15 CFM @ 110 psi, (minimum ¾" diameter unrestricted line);Electrical requirement 230 V, 3-phase at 70 Amps. -- Available Option: Extra wide, custom version that cuts down the middle of up to a 24" wide stringer, yielding two sets with no waste (except sawdust).