BALESTRINI - NOVA 3: Double End/Round End Tenoner Automatic double round End Tenoner -- Max. length capacity: 1,950 mm (76 3/4"); min. length cap.: 240 mm (9-1/2"). -- Tenon width: Up to 80 mm (3-1/8") + thickness; thickness up to: 30 mm (1-1/8"); tenon depth range: 15 - 30 mm (9/16" - 1-1/8"); 9,000 RPM cutterhead speeds through high-speed frequency changer.Machine equipped with: -- 9 kW Total connected power; free-standing control console; automatic cycling. -- Produces up to: 1,200 Double ended tenons per hour. -- Some used tooling included.

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump, water and steam piping Emissions Control: All required bag houses (SJVUAPCD) California permitted. -- REDUCED PRICE!

30" Planer÷Model S-290÷3 Phase÷Planer is in excellent condition. The planer was refurbished a few years prior to us purchasing in 2020 and is still fully functional.

BAXTER WHITNEY S-290 36" W x 8" Thick Single-Sided Planer, with Helical Cutterhead & SharpenerSpecifications: -- Planing thickness 1/16" - 8". -- Min. stock length: 3" Butted & 14" Not butted. -- Variable feed speeds 30 - 90 FPM. Equipped with: -- Helical Cutterhead, with 40 HP - 3,510 RPM - 230/460 V Motor. -- Sectional chipbreaker. -- Sectional infeed roller. -- 3 HP - 1,755 RPM - 230/460 V Feed motor. -- (2) Powered table rollers. -- Motorized raise-and-lower of table.Complete with: -- Sharpener.

BECKER KVT 3.100 3.6 Kw (5 HP) Vacuum pump:Oil-less (Dry) Rotary Vane Vacuum Pump System, rated at 69 CFM and 100 cm/Hr with max. 27"Hg; Heavy Duty construction, compact design, small footprint. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer. -- Complete WithInlet vacuum air filter system.

Becker VTLF 250 SK Vacuum Pump: 9.3 kW (12 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System, 176 CFM, max. 25"Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer; 2-1/2" BSP x 2" NPT nipple coupled to a TEFC; 190-255/330/440V, 1,160 RPM motorNote (2) unit available and the price is for each

BECKER - VTLF 2.250: Vacuum Pump (Oil free Vane)Specifications -- (1) 7.5 kW (10 HP) Oilless (Dry) Rotary Vane Vacuum Pump System. -- Pump has: 169 CFM Total; 338 CFM max.; 25"Hg; Heavy-Duty construction; compact design; small footprint. -- 100% Oilless Vacuum Pump virtually maintenance-free with: Built-in carbon vanes & built-in suction filters; vacuum regulating valve; secondary suction for additional cooling; blow off valve/silencer. -- 2-1/2" BSP x 2" NPT Nipple coupled to a TFC; 1,150 RPM motor.

BECKER - KVT 2.100: 3.6 kW (5 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System, rated at 69 CFM and 100 cm/Hr with max. 27"Hg: Heavy Duty construction, compact design, small footprint. -- 100% Oilless Vacuum Pump virtually maintenance-free with: Built-in carbon vanes; built-in suction filters; vacuum regulating valve; secondary suction for additional cooling; blowoff valve/silencer. -- Complete with: Vacuum Pump stand; double inlet vacuum Air Filter System.

BECKER - KVT 3.100: 3.6 kW (5 HP) Vacuum PumpOilless (Dry) Rotary Vane Vacuum Pump System rated at: 69 CFM & 100 cm/Hr with max. 27"Hg; Heavy-Duty construction; compact design; small footprint. -- 100% Oilless Vacuum Pump: Virtually maintenance-free with built-in carbon vanes & built-in suction filters; vacuum regulating valve; secondary suction for additional cooling, blow off valve/silencer. -- Complete with:Inlet vacuum Air Filter System.

Becker VTLF 2.500 "HEAVY DUTY" Vacuum Pump: 12.6 kW (17 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System, 336 CFM, max. vacuum 22.1"Hg; Heavy Duty construction, compact design, small footprint. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer; 4" BSP x 4" NPT nipple coupled to a 17 HP, 1,180 RPM TEFC motor; shipping weight 1,000 lbs.

BELFAB - NBM5-20: Modular Dust CollectorPatented modular technology; 6,000 CFM with: Static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with: (1) Service door & (1) explosion door per NFPA 68 safety regulations; unit has (5) filter modules. -- Each "NBM" filter module with: (18) 7" x 60" Poly twill filter tubes. -- Direct Drive centrifugal Fan Assembly with: HUMMER 20 HP @ 1,800 RPM High-Efficiency TEFC blower Motor; UL & CSA approved; AMCA Class-C anti-spark blower assembly with: Heavy-Duty steel impeller; 16" inlet dia.; 825 sq./ft. filter surface area. -- Control Panel & Shaker Mechanism includes: (2) Interlock magnetic starters; (1) for blower motor & (1) for automatic shaker mechanism; adjustable timer; pilot lights all prewired. -- Includes (10) Plastic drum.

BELFAB LW4-15 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 15 HP, 3,600 RPM, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection.Equipped with: -- (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) cloth collection bags down, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Note: No motor starter included.

BELFAB RPJ26-121 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 15,285 CFM approx. baghouse dust collector with (121) filter bags at 10-feet long with metal cages. Total of 1,884 sq. ft of cloth area. -- Filter Cleaning: Reverse Pulse Jet (RPJ) via plant compressed air that is sequenced by diaphragm valves/solenoids/manifold thru to a Venturi that injects a burst of air pressure to dislodge the dust build up on the outside of filter bags. This is a continuous process during the operation of the dust collector. (no shut down is needed). -- Main Fan: Capacity of 75 HP (motor not included) side-mounted blower. with approx 26" dia. inlet. Rated at approx 15,000 CFM @ 15" SP. -- Comes with: Main starter with control panel. -- System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, safety railing, and approx. 20" Rotary Air Lock. -- Housing is about 8'-5" square by about 23' high overall. Weight with structure is about 8,600 Lbs. -- Note1: Round cone section with storage capacity of about 246 cu ft may not be included. in above height and weight.

BENCHMARK 205-HP3 Hot Melt Adhesive ApplicatorHot Melt Adhesive Applicator with: -- Bodine adjustable speed motor. -- Bead dispensing applicator. -- Also includes an extra Bodine adjustable speed motor regulator, for fine tuned glue application.

BIESSE - JADE 240: Edgebander (with Premill & Corner Rounding) -- Specifications• 7" Smart Touch control panel for machine operation, gluing unit controls• Two (2) motor pre-milling unit with symmetrical diamond tools• Anti-adhesive spray unit to keep panel surfaces clean• Gluing unit SP03• Two (2) motor end trim unit with pneumatic bevel• Fine trim unit RF02 with tilt and digital trim adjustments• Multi-profile insert cutters for radius/straight cutter• Two (2) motor corner rounding unit AR02 (set up for 2mm radius)• Radius Edge scraper with 2mm inserts• Glue scraper• Buffing unit• Under-hood LED cabinet lights• 12m/min feed speed• 8 mm wood strip capacity• 150mm (6") min panel length• 85mm (3.35") min panel width• Includes auto transformer• Actual Model: BIESSE JADE 240

BIESSE - AKRON 1440 AFS: Single Side Edgebander (w/Premill & Corner Rounding) + "Air Force" Technology -- Specifications• Latest Technology combines: Productivity, efficiency, and flexibility for all types of edgebanding material with Zero Edge gluing.• Smart Touch 21.5" HD-Color Touch Screen Control with Windows Operating System• Feed Speeds 8, 12,15 and 18 m/min• Motorized pressure beam• Infeed Fence and Pressure Rollers (Servo Controlled) • Anti-Adhesive Station• Infrared Heating System on infeed fence• Auto adjusting Pre-Milling Unit with Diamond Cutters• Pre-Melt Glue Unit for EVA hot melt glue• Air Force Hot Air System (AFS) with reserve air tank (for pre-glued edgebanding) • Front & Rear End Trimming Unit with Tilt• Top & Bottom Fine Trimming Unit (Servo Controlled)• 2 Motor Corner Rounding Unit (Servo Controlled)• Top & Bottom Profile Scraping Unit (Servo Controlled)• Top & Bottom Edge Scraping Unit• Top & Bottom Buffing Unit• Panel thickness: 10-60mm• Edgeband thickness (rolls) 3mm• Edgeband thickness (strips) 10mm• Min panel length: 140mm = 5.512 in• Includes auto-transformer• Actual Model: BIESSE AKRON 1440 AFS Zero Edge

BIESSE LATO 38 Edgebander. --6-Station Edgebander with 8mm (5/16") edgebanding thickness. --Capacity: Min. panel width 85 mm or 50 mm w/250 mm panel length, min. panel length 140 mm, max. panel thickness 45 mm. --Equipped with: -- Auto strip and coil feed magazine with 3 mm PVC guillotine. -- Teflon coated hot melt glue pot, dual digital thermostats, 1 in. diameter glue applicator roller. -- Pressure section w/ (1) large dia. non-stick coated drive roller and (2) pneumatic pressure controlled idle rollers, horizontal adjustment w/ digital indicator. --Workstations: -- Front and rear end trims (0.5 HP motors), motors travel on 45° slides and tilt 0 - 12° on a horizontal plane. -- Top and bottom rough trim (0.73 HP motors), motors tilt 0 - 30°. --Top and bottom fine/bevel/profile trims (0.73 HP motors), motors tilt 0 - 30°, cutters for 10° bevel and 3 mm PVC radius round, digital readouts for setup (w/ quick change motors for tool change). -- Top and bottom scrapers for 3 mm thick PVC banding, pneumatic pressure control for scraping knives, digital readout for horizontal adjustments. -- Top and bottom hot air blowers. -- Top and bottom buffing (0.5 HP motors), units tilt 0 - 30°. -- Feed chain "anti-slip" 80 mm wide rubber pads, feed speed 33 FPMand with a 2 HP feed drive.

BIESSE ROVER C 6.40 CONF 3 FT - 5' x 12' CNC Machining Center with ATC/Boring (5-AXIS PROCESSING): -- Specifications: Working Capacity: "X" Axis 144" (3,650 mm); "Y" axis 60.2" (1,530 mm); "Z" axis stroke 26.1" (663 mm); max. material thickness 10.8" (275 mm). -- Positioning Speed:"X" & "Y" Axes 328 FPM (100 MPM) each; "Z" axis 98 FPM (30 MPM). -- Worktable:(10) EPS (Electronic Positioning System) Panel supports with: (8) Lifting bars; (4) ATS vacuum pods with universal clamping systems per panel support.(2) Independent working areas with: (10) Pneumatic back stops, (2) pneumatic side stops & (2) pneumatic central stops. -- Boring Unit:4 HP (3 kW) Motor with variable speed from 1,500 - 7,500 RPM; (5) independent vertical spindles in "Y" axis.(4) Horizontal boring spindles with: (1+1) in "X" axis & (1+1) in "Y" axis. -- Machining:(1) 16 HP (12 kW) Liquid Cooled 5-AXIS electro spindle router with HSK F63 adaptor; variable speed from 3,000 - 24,000 RPM.(1) 8-Position ATC tool plate, mounter at the Router's head for "On the Fly" Tool change. -- Operator & Machine Control:PC Front-End with BIESSE "NC 1000" + "BiesseWORKS" + WINDOWS "XP" Operating System. 15" Color CRT, full keyboard, mouse, 1.44 MB & CD ROM disk drives. RS 232 & USB ports. Ethernet connection, specific function controls, & and Internet trouble shooting capabilities. Air-conditioned control cabinet & dust free environment. "BiesseWORKS" is a multitask Operating System with: Input/output modules, axes override, (4) axes interpolation, diagnostic graphics aid for programming, machine data & tool management. -- Complete with:(1) 250 m³/Hr Vacuum Pump; safety fences & mats; original documentation; user & maintenance manuals, wiring diagrams & operation of Numerical Control. -- Options Include:(1) Ingersoll Rand Air Compressor & Air Dryer, and (1) MicroAir Dust Collector, as pictured -- Actual Model is BIESSE ROVER C 6.40 CONF 3 FT

BIESSE AKRON 1445 A EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + EVA/PUR processing: -- Specifications: Min. panel height: 10 mm; Max. panel height: 60 mm; Height of edgebanding material: 14 - 64 mm; Thickness of edgebanding material in rolls: 0.4 - 3 mm; Thickness of edgebanding in strips: 0.4 - 10 mm.Min. panel protrusion from the track: 25 mm; Panel length: 140 - 3200 mm; Min. panel width (with length 140 mm): 85 mm; Min. panel width (with length 250 mm): 50 mm.Multi Speed Track-Feed Kit with (4) processing speeds of 8-12-15-18 MPM. (26-39-49-59 FPM), max speed is 15 MPM (49 FPM) when Corner Rounding, 12 MPM (39 FPM) for panels over 40 mm (1.57") height.Glue & Pressure Section: Infrared lamp IRL 700; Gluing unit Quickmelt QM 703 EVA melting glue. Special glue container for PU glue; Additional glue container for EVA gluing unit with melting device; Automatic edge feed; Cutter knife; Pressure zone with 1-Drive & 2 pressure rollers.Working Units: Anti-Adhesive Unit ADZ02: for ease of good cleaning before Pre-Milling. -- Pre-milling unit RT02; with "AUTO-SET", 2 x 0,8 kW, 12000 RPM motors, Diamond Cutters; front/rear inclination 0° -15°. -- NC Controlled Gluing, edge feeding, and pressing unit VC-511. -- End trimming unit IN-801; with 2 x 0,8 kW, 12000 RPM, front/rear, inclination 0° -15°. -- Rough trimming unit RS-502: 2 × 0,65 kW, 12000 RPM top/bottom. -- NC Controlled Fine trimming unit RF-02: 2 × 0,65 kW, 12000 RPM top/bottom; Unipoint tilting from 0° - 45° to facilitate adjustments. -- Sliding Liquid Unit for Corner Rounding. -- (2) NC Controlled Multifunction Corner Rounding unit AR02E, 0,65 kW each, for Corner Rounding, Straight Work pieces, Post and Soft-Forming 90° -180° degrees. -- NC Controlled Edge scraper unit RB02; Glue scraper unit RC02. -- Cleaning Unit LPT02 for scrapped edges. -- Buffing unit SZ02: 2 × 0,37 kW, 2,800 RPM motors. -- Hot Air Blower PH-501; To re-activate color of plastic after scrapping. Machine Features: Top Belt pressure beam. The top presser comprises a rubber belt with a stain-proof coating. The thrust exercised on the panel is provided by springs housed on techno polymer connecting rods. -- Automatic track lubrication system with dynamic track absorption. -- Manual infeed system for narrow pieces. -- One coil automatic edge feeding. -- "TEKNO GLUE" system for Optimal gluing in any working condition. -- Pre-Melter QM-703 for EVA Glue. -- Hybrid gluing head for granulated EVA and Polyurethane glue. -- Pre-Melter QM703 for Polyurethane glue in cartridges. On-demand top-loading pre-melter for PUR glues. -- Adaptive infra-red lamp AdlRL-700, to heat up the panel side before the glue application, in order to optimize the adhesion process. -- Independent pneumatic exclusion of the top/bottom fine trimming unit. Operator & Machine Control: Biesse, Windows-based, 21.5" full HD "SMART TOUCH 10" control & operating system.Complete With: Kit pro