Each system is custom built to fit your specifications. Standard Electric Lateral Chain Feeders include Basic Feeder with transport length of 30" Workpiece width 3/4" - 9-1/4" Min. Workpiece length 12" Drive system with 4 HP total drive system Feed speed range 50 - 250 ft/min (up to 400ft/min available) Thickness 1/4" - 4" Steel flat top chain 60 Cycle per minute Adjustable Fence 35MM Feed Wheel Shafts Options 6'-16' Lateral Chain Feeder Feed Wheel Knurled, Urethane or Light Knurl Hub Options 3/4" or 2" Powder Coating Bridge Side Fence Feed Speeds up to 400 FPM Short Stock Fence 12" Wide Capacty

Eagle Machinery Infeed Deck: Chain driven, approx 12" wide x 195" long Eagle tilt hoist table

Specifications: - Working Width: 15 - 230 mm (19/32 to 9-1/16 inches) - Working Height: 6 - 150 mm (1/4 to 5-29/32 inches) - Spindle Speed: 6,000 RPM - Spindle Dia: 40 mm - Clamping Length of horiz. and universal spindles: 235 mm - Clamping Length of vertical spindles: 160 mm - Feed Speed (variable): 6-24 m/min (19-80 fpm) - Diameter of Feed Roller: 140 mm (5-1/2 inches) - Diameter of Table Rollers: 100 mm (4 inches) - Width of feed rollers: Shaft mounted to 9 inches - Width of rollers opposite left spindle: Stackable to 6 inch Head Power: - First head: 10 HP - Second head: 7.5 HP - Third head: 7.5 HP - Fourth head: 15 HP - Fifth head: 10 HP Additional notes: - Driven roller outfeed table: Smooth Steel - Driven table before first bottom spindle: Serrated Steel - Top Chipbreaker shoes: Dual receding (spring), Smooth - Manual lubrication pump - Tables and fences: Hardened Smooth Chrome Total Weight unskidded: 8,375 lbs.

Leadermac Moulder 12" Capacity 10-Heads: #1 10 HP, #2 25 HP, #3 25 HP, #4 25 HP, #5 25 HP, #6 30 HP, #7 30 HP, #8 30 HP, #9 30 HP, #10 15 HP 140 FPM with 15 HP feed motor ATS Heads on Top and Sides Second machine available for parts only: Spare castings, gearboxes, pendulums, control panel, spindles

Leadermac LMC-623H Moulder with Infeed Deck This system has not run in year and will need repair.

Leadermac LMC 418-S 4 head moulder 20-80 FPM feed spiral head on bottom 460 volt 3 phase

Lobo 6-Head Moulder 9" Wide capacity

Year: 2006 Working Width: 25mm to 230mm (1" to 9") Working Thickness: 8mm to 120mm (0.31" to 4.72") Bottom Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Top Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 7.5kW (10 HP) Side Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Configuration: Bottom, Side, Side, Top, Top, Bottom Feed Motor: 4kW (5.5 HP) Elevation Motor: 0.75kW (1 HP)

Infeed Deck & Conveyors. Infeed Deck: 12' motorized chain driven - 4 metal chains. Stationary table with 4 sets of 5.5" rollers for Moulder

Reckmann Moulder/Sander ready to be loaded!

Renzo Borgonova Rope Moulder and Splitter

SCMI Superset XL Moulder 480 V/3 PH

Working height 120 mm working width 240 mm feed speed 6-36 fpm 6’6” straightening infeed

Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 4th head: top horizontal spindle 15 hp, 208-230/460 volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, 208-230/460 volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, 208-230/460 volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Manufacturer’s Specs Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460)volt three phase drive motor - 4th head: top horizontal spindle 15 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, [208-230/460](tel:208-230/460) volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, [208-230/460](tel:208-230/460) volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Great Condition 500 RPM Spindle speed 8 Head with jointers 1-13/16" Spindle Diameter, Belt Driven 2 bottom cutter heads with jointers-15HP/15HP 2 top cutter heads with jointers--20 HP/15HP 2 right hand cutter heads with jointers--10HP/10HP 1 left hand cutter head with jointer--10HP 1 universal cutter head--10HP

7 Spindle Moulder with Manual Bed Lubrication 6000 RPM Spindle Speed 19-91 F/Min Feed Speed Will Take 7" x 5" Lumber Specs: 1ST BOTTOM--7.5 HP 1ST FENCE SIDE--7.5HP 1ST LH SIDE--10HP 2ND FENCE SIDE--7.5 HP 1ST TOP-15HP 2ND BOTTOM-10HP UNIVERSAL-7.5 HP FEED DRIVE--3 HP BEAM LIFT--.5 HP

Weinig Powermat 500 Moulder MFG Specs: 460V; ELECTRONIC "SMART" BRAKES; POWERCOM+TOUCHSCREEN; MODEM FEED ELECTRONIC 7.5HP; #1:BOTTOM 10HP; 8000RPM; 1 13/16 SPINDLE; TABLE PLATES HARDENED B4 #2:RIGHT 15HP; 8000RPM; RAD ADJ; #3:LEFT; 15HP; 8000RPM; PRESS SHOE W/2 LATERAL PRESS ROLLERS SPR MT #4:TOP 25HP; 8000RPM; REC CB; TBL PLT FOR WOODEN INSERT; PROFILE GUIDE AFTER; PL #5:BOTTOM 20HP; 8000RPM; TABLES/FENCES CHROMED:INFEED TABLE 1050mm; 1 POWERED ROLLER ; MAN-WAX; CL LUBE ELECTRICS:EL CAB + OPERATOR PEDESTAL SEPARATE PRESSURE:FIXED PRESSURE ROLLERS ABOVE SPRING MTD; PRESSURE ROLLER AT INFEED SAFETY: SAFETY INTERLOCK; 1 LIGHT INSIDE ENCL; STRAIGHT EDGE;2 CLAMPING LENGTH 240 mm/ DIA 1 13/16"; GUIDE EDGE AFTER LEFT TOOL HOLDER;

Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room

This entire listing is being sold as one lot. 1997 Weinig U23EL 6-Head Moulder with infeed and outfeed decks 2000 Weinig R960 profile Grinder with Weinig 970080 Opticontrol Stand TF-900 Resaw Precision 281 chop saw Precision 281 RH chop saw Shanklin F2 wrapper Damark STR 16ADD heat tunnel Ogam 280 Rip Saw