LIMTECH ORION-512 Flat Table CNC Router with Tool Changer & Boring:5' x 12' Capacity, great for "Nested Base Manufacturing" or just about any type of 3-Axis work.Axes travel range & feed speed: -- X-Axis 61" (1,550 mm), Y-axis with 145" (3,700 mm) and Z-axis 11.8" (300 mm). -- Working Table: 61" (1,550 mm) x 145" (3,700 mm); includes (3) pop-up stops to aid in panel positioning & a manual valve controlled 6-zone special high flow vacuum table system. -- X- & Y-Axis speeds are 2,165 IPM and Z-axis is 1,000 IPM for quick traverse positioning that reduces total CNC machining time between cutting cycles. -- DELTA Servo Drive powers the axes movement.Machine bed/base: -- The welded structurally engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- X-, Y- and Z-Axis travel: The moving gantry bridge travels on 1.2" (30 mm) thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high speed traverse and accurate cutting. -- Tool gantry & bridge movement by 1" (25 mm) rack & pinion; the vertical Z-axis travels on precision ball screw for smooth consistent and highly accurate movement.Routing/Machining: -- (1) 12 HP (8.8 kW) Air cooled "HSD" Router spindle with: HSK Tool holders, variable programming speeds from 1,000 to 24,000 RPM. -- Tools are loaded into the "HSD" spindle by (1) 8-position, side mounted on the fly tool changer. -- Tool heights can be set using the Tool Length Setting Gauge (included); machine uses ER-32 tool collets.Drilling/Boring: -- (1) Vertical 9-head spindle drills in L-shape configuration for 32 mm contstruction hole & line boring.CNC Control & Operator Interface: -- The "SYNTEC" INDUSTRY CONTROL System provides the operator an easy to use interface and the flexibility to customize to user specifications; Network-ready via Ethernet and USB flash drive. -- Features: Canned cycle, tool length diameter compensation, work coordinates-offsets, spindle feed rate overrides, program size up to flash drive size, DNC or drip feed operation and unlimited offset registrations. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs.Complete with & Includes: -- Dust hood with 6" manifold connection; (4) HSK tool holders; Tool Length Setting Gauge; MPG hand held wheel remote. -- Vacuum Pump; 8 kW (11.5 HP) Vacuum Pump with ON/OFF pre-plumbed to control panel. -- Other Features: Machine Central lubrication, safety light beams and automatic homing operation. -- Machine weighs approx. 8,500 Lbs; 15 CFM air consumption at 90 PSI; machine power supply is wired for 220 Volts, 60 Cy, 3-Phase. Includes: Installation & Training by Factory Technician, and (1) Year Parts & Labor Warranty.

MORBIDELLI - N 100 15: Flat Table Machine with ATC, Boring -- Specifications:• 5' x 12' Worktable• 13 HP (S6) air cooled electro spindle with HSK F 63 quick release tool holder• 1,500 to 24,000 RPM inverter-controlled spindle speed• Aluminum solid worktable that can nest full sheets or be used for routing smaller components• 14-Position tool changer mounted to side of machine• (12) Vertical drills: (7) in X axis and (5) in Y axis• X/Y maximum positioning speeds is 35 meters/min (115 feet/min)• Z axis stroke 250 mm (9.84")• Maximum panel passage 150 mm (5.90")• (2) 300 m³/H vacuum pumps• Mobile console with 17" LCD display with Windows 7 operating system• XILOG PLUS Operator Interface and Xilog Maestro Cad Cam free form software with labeling. 7" color universal remote-control pendant allows for the effective management of all machine functions from movement of controlled axes in manual jog mode to loading and execution of a program. Fitted with a USB port which allows for a quick load and setup of new programs. Air-Conditioned electrical cabinet.• Safety bumpers on both sides of the mobile unit allows for safe movement while saving space by eliminating caging around the machine. • Electronic tool detecting length (touch probe) allows for detecting tool length without running a test program• Dust Collection: (1) 200 mm (7.87") on router (1570 cfm)• Operating air pressure with 3/4" ID hose 7 ATM (102 psi)• Autotransformer allows choice of 208/230 or 460 volt 3 phase operation

MORBIDELLI - N 100 15. Flat Table Machine with: ATC, Boring -- Specifications5' x 12' x 37"; H - High efficiency laminate aluminum with: Vacuum locking system.Grid pattern allows: Use of vacuum pods or closed cell rope gasket material; use of spoilboards for nested-base machining. Part location pop-up pins mounted on: Table perimeter; chips conveying device. -- Working AreaX-Axis: 3,686 mm (145.12"); Y-Axis: 1,555 mm (61.22"); Z- Axis stroke: 250 mm (9.8"); Z- Axis: 150 mm (5.9"). -- TravelsX-Axis: 4,230 mm (166.54"); Y-Axis: 1,985 mm (78.15"); Z-Axis: 250 mm (9.84"). -- Positioning SpeedsX- & Y- Axes: 35 MPM (114 FPM); moving gantry, high precision rack & pinion system for: X & Y Axes; ground ball screws for: Z-Axis. All axes ride on extra large precision profile linear guide ways. -- Boring Unit2.2 kW (3 HP) Motor; (12) independent vertical roto-axial spindles with: (8) In X-Axis; (4) in Y-Axis; max. spindle speed: 8,000 RPM. -- Machining(1) 9.6 kW (13 HP) Air-cooled electrospindle with: HSK F63 Adaptor; variable spindle speeds: 1,500 - 24,000 RPM; (1) 14-position TR side tool changer. -- Operator InterfaceMobile console: 17" LCD Display with Windows 7 Operating System.“XILOG PLUS Operator Interface & Xilog MAESRO CAD CAM free-form software with labeling. "MAESTRO SUITE" with: Auto-diagnostic to zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC: Due to active tool wear using space-and-time criteria; "TECPAD" remote pendant with: 7" Color touchscreen & fitted with a USB port, which allows for a quick load & setup of new programs. -- Complete with: (1) 300 CBM/Hr Vacuum Pumps; air-conditioned electrical cabinet. - Universal 3-phase transformer.Electronic tool detecting length (touch probe) allows for: Detecting tool length without running a test program.Safety bumpers on both sides of the mobile unit allow: Safe movement while saving space by eliminating caging around the machine.

MORBIDELLI - X200: Flat Table Machine with ATC / BORING / RAKE / OFFLOADING -- Specifications5' x 10' Traveling "Bridge Gantry"; stationary aluminum "MATRIX" grid table with: Square grid pattern for fixturing parts.Grid pattern allows: Use of vacuum pods or closed cell rope gasketing material; use of spoil boards for "nested base machining".(8) Vacuum zones controlled by electronic switches; (5) part location pop-up pins mounted on the table perimeter.Working Flow from left-to-right direction. -- Working Field"X" Axis: 123" (3,117 mm); "Y" axis: 61" (1,557 mm); "Z" axis stroke: 9.4" (240 mm); max. material thickness: 5.9" (150 mm). -- Work TableWorktable divided into (8) Vacuum Zones with: Automatic & manual selection. -- Positioning SpeedPRO-SPEED "X" & "Y" Axis vectorial speed; 370 FPM (113 MPM); "Z" axis positioning: 82 FPM (26 MPM); closed loop AC Servo drive system.High precision "Rack & Pinion" system in: "X" & "Y" axis; ground ball screws "Z" axis; all axes ride on extra-large precision profile linear guideways. -- Boring Unit"F16V Ro.Ax" Boring Unit: 3 HP (2.2 kW); variable speed: 1,000 - 8,000 Max. RPM motor.(16) Independent vertical spindles on 32 mm Centers; (8) spindles in: "X" axis; (8) spindles in: "Y" axis. (12) Horizontal Spindles with: (4 + 4) in "X" axis; (2 + 2) in "Y" axis. (1) "X" Axis Grooving Saw with: Max. 120 mm dia. blade. -- Machining(1) 20 HP (14 KW) Air-cooled electro spindle with: HSK F63 Adaptor; variable spindle speeds: 1,500 - 24,000 RPM.(1) 14-Position "FAST 14" ATC tool rack mounted inside the protective cage on the mobile unit. -- Operator InterfacePC Front-End with: "Eye-M"; + "Maestro-Active HMI" (Human-Machine Interface Software) + Windows "10" Operating System.21-1/2" Full HD touchscreen; USB ports; serial ports: RS-232 & RS-242; Ethernet adaptor.Programs can be transferred via USB or downloading by wire is possible; all computer components are mounted on a mobile stand. "Xilog Maestro Active HMI" (Human Machine Interface software)"; offers incredible list of functions from: (a) Auto-diagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria.MSL Connector (Maestro Scripting Language): Software module developed by SCM Group to directly connect its own CNC machines with: Main 3rd Party software packages available on the market.Maestro is: Protected against unauthorized copy through a hardware USB key.Includes 1-License for: "Xilog Maestro CAD CAM" Free Form Software + Maestro-Connect: (1) Year subscription service.Maestro-Connect: Complete hardware preset for IoT Platform. Additionally equipped with onboard mini-CAD with: Built-in programming for writing circles, ellipses, & angles with only a few keystrokes.Onboard cycle optimization, onboard calculator, mirror imaging, and repeat imaging. -- Complete with:(2) 300 m³/Hr Vacuum Pumps; Handheld "TECPAD" remote control with: 7" Touchscreen, co

MORBIDELLI - AUTHOR 330: Flat Table Machine (w/ATC/Boring) -- Specifications4' x 10' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing. -- Work Area"X" Axis: 113.85" (2,892 mm); "Y" axis: 50.78" (1,290 mm); "Z" axis stroke: 11" (280 mm); max material thickness: 4.7" (120 mm). -- NOTE: When using the "Rake System," 4' x 8' is the max. panel size. -- Positioning Speed"X" Axis: 262 FPM (80 MPM); "Y" axis: 148 FPM (45 MPM); "Z" axis: 74 FPM (22.5 MPM). -- Closed loop AC Servo drive system with: Recirculating ground ball screw in the "X", "Y" & "Z" axes; all axes ride on precision prism linear guideways. -- WorktableAluminum grid "MATRIX" vacuum table machined with: Square grid pattern for fixturing parts; grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards. -- (2) Independent working areas; external pop-up reference pins located on the sides & back of the table for positioning parts. -- Boring Unit2 HP (1.5 kW) - 4,000 RPM Motor; (12) independent vertical boring spindles: (7) Spindles in "X" axis & (5) spindles in "Y" axis. -- Machining (1) 10 HP (7.5 kW) "Power 2000" Electrospindle w/lifetime lubrication; HSK F63 adaptor; spindle speeds from: 900 - 18,000 RPM. -- (1) 12-Position "Rapid-12" traveling ATC tool plate for "on the fly" ATC. -- Operator InterfacePC Front-End with: NUM 1040 + Xilog III + Windows Operating System. -- 12" High resolution CRT, ergonomic keypad; 1.44 MB & CD ROM disk drives; (2) serial ports: RS-232 & RS-242. -- All housed in air-conditioned cabinet with: KELVIN Air-Conditioner. -- Complete with:(2) 300 cbm/Hr Vacuum pumps; emergency stop rope; Safety "Bump-Stop" system; Handheld pendant control. -- Options IncludedNesting Rake & off feed table to increase machine/Operator output. -- "SOUTHWORTH" Lift Table; roller conveyor section to bridge safety barrier. -- (1) 10 HP (7.5 kW); 460 V; 3 Cy DUSTEK 3-bag Dust Collector. -- Actual model: MORBIDELLI AUTHOR 330 NBR

MORBIDELLI - M 400 FM: Flat Table Machine (w/ATC) -- Specifications5' x 12' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing. -- Work Area:"X" Axis 143.7" (3,650 mm); "Y" axis 62.9" (1,600 mm); "Z" axis stroke 11" (280 mm), max material thickness is 6.69" (170 mm). -- Positioning Speeds"X" & "Y" Axis 279 FPM (85 MPM); "Z" axis 98 FPM (30 MPM).Closed loop AC Servo drive system with: Precision rack/pinion in "X" axis; recirculating ground ball screw in: "Y" & "Z" axes.All axes ride on precision prism linear guideways. -- Worktable5' x 12' Aluminum grid "MATRIX" vacuum table; machined with: Square grid pattern for fixturing parts; grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards.(6) Independent, NC controlled working zone areas; external pop up reference pins located on the sides & back of the table for positioning parts. -- Machining(1) 16-1/2 HP (12 kW) "Power 2000" Electrospindle with: Lifetime lubrication; HSK F63 adaptor; NC controlled spindle speeds from: 900 - 18,000 RPM.(1) 16-Position "Rapid-16" traveling ATC tool plate for "on the fly" ATC.NC Touch off Probe for: Automatic tool length setting. -- Operator & Machine ControlPC Front-End with: XILOG PLUS + Windows "7" Operating System; 17" high resolution LCD flat screen; ergonomic keypad.Includes: USB Ports; serial ports RS-232 & RS-242; Ethernet adaptor.Programs can be transferred via USB or downloading by wire is possible; all computer components are mounted on a mobile stand. -- "XILOG Plus" offers incredible list of functions from: (a) Auto-diagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- Additionally equipped with: Onboard mini-CAD with built-in programming for writing: Circles, ellipses, & angles with only a few keystrokes.Onboard cycle optimization; onboard calculator; mirror imaging & repeat imaging; all electronics mounted in an air-conditioned, dust-free environment control cabinet. -- Complete with:(2) 300 m³/Hr "BECKER" Vacuum Pumps; automatic central lubrication; central optimized Dust Collection; emergency stop rope; perimeter safety fencing; handheld pendant control. -- Actual model: MORBIDELLI M 400 FM.

MORBIDELLI - M 400 F: Flat Table Machine (Loading/Unloading) -- Specifications5' x 12' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing with: "Rake" & "Automatic Offloading Conveyor".Loading/working/processing direction from: LH (Facing to RH (facing). -- Work Area"X" Axis 143.7" (3,650 mm); "Y" axis 62.9" (1,600 mm); "Z" axis stroke 11" (280 mm); max material thickness: 6.69" (170 mm). -- Positioning Speeds"X" & "Y" Axes: 279 FPM (85 MPM); "Z" axis: 98 FPM (30 MPM).Closed loop AC Servo drive system with: Precision rack & pinion in "X" axis; recirculating ground ball screw in the "Y" & "Z" axes.All axes ride on precision prism linear guideways. -- Worktable5' x 12' Aluminum grid "MATRIX" vacuum table machined with: Square grid pattern for fixturing parts; grid pattern allows use of vacuum pods or closed cell rope gasket material & use of spoil boards.(9) Independent NC controlled working zone areas; external pop-up reference pins located on the sides & back of the table for positioning parts. -- Boring Unit3 HP (2.2 kW) - Variable speed: Up to 8,000 RPM motor; "F37L2" boring block with (24) Vertical spindles with: (10) independent vertical spindles in "X" axis & (14) spindles in "Y" axis.10-Spindle "X" axis boring unit NC controlled with: 11-1/2" (293 mm) "Y" Adjustable spread from its home position; independently controlled according to the drilling pattern being performed; this feature is IDEAL for high-speed line hole drilling.(12) Horizontal spindles with (4 + 4) in "X" axis on the programmable independently NC controlled 10-spindle vertical boring unit; (2 + 2) on the 14-spindle boring unit in "Y" axis. (1) NC Controlled 0° - 90° "X" / "Y" Grooving Saw for max. 120 mm dia. blade. -- Machining(1) 16-1/2 HP (12 kW) "Power 2000" Electrospindle with: Lifetime lubrication; HSK F63 adaptor; NC controlled spindle speeds from: 900 - 18,000 RPM.(1) 16-position "Rapid-16 traveling ATC tool plate for "on the fly" ATC. NC Touch-off Probe for: automatic tool length setting. -- Operator InterfacePC Front-End with: "eye-M" + Windows Operating System mounted in separate control cabinet; INTEL 1.0 GHz Pentium III microprocessor; 20 GB hard drive; 56 K modem; integrated 3Com network card; 128 MB.15" VGA Color monitor & ergonomic keypad; serial ports RS-232 & RS-242; USB ports. "eye-M" Offers incredible list of functions from: (a) Auto diagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria; programs can be transferred via diskette or downloaded by wire.Additionally equipped with: an on-board mini CAD with built-in programming for: Writing circles; ellipses; angles with only a few keystrokes; on board cycle optimization; onboard calculator; mirror imaging; repeat imaging. -- Complete with:(2) 360 m³/Hr "BECKER" Vacuum pumps; automatic central lubrication; central optimized Dust Collection; multi-voltage autotrans

MULTICAM 7000 Series Multi Spindles with 8' x 10' worktable & (8) Router Spindles: -- Specifications:8' x 10' Fixed table, moving gantry machine in a front-to-back configuration -- Equipped with:(8) 3 HP 18,000 RPM Perske routing spindles. Note: 3 Spindles need Repairs (bearings) -- OperatorInterface:MULTICAM CNC Controller: Stand-alone system based on the AMD "SC520" microprocessor with 64-bit motion algorithms using FPGA technology that excels in high speed, continuous motion. (5,000) Vectors/Sec sustained calculation & execution rate and (1,000) line "look ahead". The controller includes a keypad interface with hot keys for repetitious functions & DNC access to host computer. Memory for instant job replay, 12 Megabytes of Memory with unlimited file size transfer capabilities, interprets HPGL and M & G codes, Ethernet and RS-232 interface for PC communication. -- Complete with: Documentation, assorted tool holders. -- Note: 3 Spindles need Repairs (bearings).

MULTICAM APEX 3R with 5' X 10' Table and ATC:60" x 120" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 20 HP vacuum blower system. -- Equipped with:(1) 10 HP "HSD" spindle with 8-position static tool changer, variable speed by inverter up to 24,000 RPM. -- Full table coverage:X- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integrated 25 mm linear roller bearing rack system, 8" Z-axis travel via lead screw drive. 1,000 IPM Max. cutting feed, 1,700 IPM max. rapid traverse rate on X- & Y-axis. -- Control:The MULTICAM CNC controller Is a stand-alone RISC/DSP system. The controller includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes, RS-232 interface for PC communication. -- Includes:(20 HP) Vacuum blower for hold-down, assorted collets and tool-holder will be included.

MULTICAM APEX 3R with 4' X 8' Table and ATC:48" x 96" Fixed table, moving gantry machine in a front-to-back configuration with a 4-zone vacuum table supported by a 20 HP Republic vacuum blower system. -- Equipped with:(1) 13.4 HP "HSD" spindle with HSK F63 adaptor. (1) 6-position static tool changer, variable speed by inverter up to 24,000 RPM. -- 4 Zone Pneumatic Table:X- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integrated 25 mm linear roller bearing rack system, 6" Z-axis clearance via lead screw drive. 1,000 IPM Max. cutting feed, 1,700 IPM max. rapid traverse rate on X- & Y-axis. -- Control:The MULTICAM Pendant Programmable Controller, PC, is a stand-alone RISC/DSP system. The controller includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes, RS-232 interface for PC communication. -- Includes:Surface Probe and Auto Calibration Sensor; Laser Pointer System; Dual Knife System (Electric Oscillating and Quick Change); K31 Multi-Tool Cutting Head; K41Knife Cutting Head; (1) 20 HP Republic vacuum blower for hold-down, (6) collets and tool-holder will be included.

NORTHWOOD - NW 3-Axis TA48MT Iron Horse: CNC Machining Center with Roller Hold-down -- SpecificationsAXES TRAVELX Axis: Front-to-back Worktable; 152";.Y Axis: Left-to-right; 105";.Z Axis: Up & down; 14";.AXES TRAVERSE/FEED RATESX-Axis rapid traverse rate: 3,150 IPM (80 MPM).Y-Axis rapid traverse rate: 3,150 IPM (80 MPM).Z-Axis rapid traverse rate: 500 IPM (12 MPM).X-Axis max. machining feed rate: 3,150 IPM (80 MPM)Y-Axis max. machining feed rate: 3,150 IPM (80 MPM).Z-Axis max. machining feed rate: 500 IPM (12 MPM).MACHINE TOLERANCESUnidirectional linear axis positioning accuracy: +/-0.0008";.Unidirectional linear axis positioning repeatability: +/-0.0003";.All tolerances are based on inspection at an ambient temperature of: 68º.Z-AXIS RAM COUNTERBALANCEForce neutral pneumatic counterbalance system with: High volume quick response valves.Vertical Z-axis: Uses a compression nut for max. accuracy and speeds up to 500 IPM.HEAD CONFIGURATION(1) 24 HP, 4-Pole, liquid cooled “cartridge"; spindle “929"; with: HSK F63 Chuck; programmable RPM up to 24,000; synthetic grease lubricated “Quad"; ceramic bearings; safety device for automatic fault detection; max. tool shank diameter: 1";. (1) HSK F63 “12-Station"; Automatic Tool Changer (ATC) Carousel; (2) programmable, lockable Air Blast Nozzles at the spindle; nozzles are programmable via: M code. (1) Dust collection shut/off programmable via: M-code; tool touch-off probe.DRILLING UNIT(1) 5-Line drill unit; each independently programmable; standard 32 mm center spacing.SPOIL BOARD MILLING SOFTWAREAllows input of all parameters necessary for surfacing the spoil board.ROLLER HOLDDOWN(2) “Quad"; Roller Holddown Systems consisting of (4) steel rollers covered with: Engineered poly coating per worktable.Rollers are: Independently programmable via CNC controller to control up & down location. ALUMINUM MATRIX WORKTABLE(1) 49"; x 97"; Cast aluminum high-flow vacuum worktables.3"; Vacuum hoses provide: Vacuum to the worktable.(1) Aluminum matrix vacuum plenums.PART LOCATION STOPS(1) 1-1/4"; Dia. steel part Location Stop is provided; automatic extension & retraction of stop is pneumatically controlled via: M Codes or pushbutton at CNC console. (1) Magnetic sensor switch for part location stop position verification; flush mounted to the edge of the worktable.POP-UP ROLLER BALLS INTEGRATED INTO THE MACHINE WORKTABLE(1) Matrix vacuum plenum equipped with: Pneumatic “pop-up"; roller balls that are integrated into the worktable.Pop-up roller balls assist the Operator in loading & unloading transfer sheets. MATERIAL HANDLING ROLLER TABLES(1) Vacuum sweep dust collection shutoff is controlled via an optic sensor with floating height to move relative to the spoil board thickness automatically.(2) 10"; Blast gates: (1) For the spindle & (1) for the table sweep. Independent safety cables around each material handling table, and the machine “Table will have quick disconnect plugs";

PUTSCH-MENICONI KOPERNIC 4,200 x 2,200 mm CNC Vertical Machining Center, New with Parts Warranty, ATC, & C-AxisSpecifications: -- Working area X-Axis 4,200 mm (165.35";), Y-Axis 2,220 mm (86.61";), & Z-Axis 100 mm (3.94";). -- Min. panel size 300 x 300 mm (11.81"; x 11.81";). -- Positioning speed: X-Axis 45 MPM (147 FPM), Y-Axis 30 MPM (98 FPM), & Z-Axis 15 MPM (49 FPM).Equipped with: -- Inclined Bakelite working table, with 20° Angle with respect to vertical, (12) Independently controlled vacuum zones with Solenoid valves with EtherCAT module & Digital vacuum pressure switch, and (10) Horizontal, (1) Left vertical & (1) Right vertical retractable pneumatic stops. -- Rack & pinion drive system on X & Y-Axes, with Automatic guide lubrication. -- Brushless motors, with EtherCAT Bus drives on All axes. -- Air pressure regulator, with digital pressure gauge. Machining: -- HSD 8 kW (10-3/4 HP) - 24,000 RPM ISO30 Air-cooled electro-spindle, with ER32 20 mm (0.79";) Chuck, High frequency inverter, & Variable spindle speeds to 24,000 RPM. -- CNC-Controlled C-Axis with 360° Rotation. -- Pneumatically actuated suction hood. -- 12-Position Automatic tool changer, with Automatic preset zero tool length probe.Control: -- OSAI “OPEN SMART CNC Control, with 21-1/2"; Display, EtherCAT Bus, USB & Ethernet ports, & MICROSOFT “WINDOWS 10"; Operating system. -- Remote pendant control.Complete with: -- Electrical Cabinet Cooling System. -- BECKER 6.6 kW (8.85 HP) 250 m³/h Vacuum Pump, with inverter for vacuum pressure adjustment from control. -- (6) ISO 30 Tool holders & (6) ER32 Clamps. -- 90° Grooving Cutter & HSD Shank for C-Axis Aggregate. -- 80 mm (3.15";) Cutter for shaving spoil board.Options available at additional cost: -- 150 mm (5.91";) Dia. Circular Tools for C-Axis Aggregate. -- 135° V-Grooving Cutter. -- Z48 Saw Blade.

SCM PRATIX S-15-B FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:Single 5' x 12' traveling "Bridge Gantry" and stationary aluminum dual vacuum table with a MATRIX square grid pattern for fixturing parts.Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested base machining".(8) Part location pop-up pins mounted on the table perimeter. -- Working field:"X" Axis is 145.11" (3,686 mm); "Y" axis is 61.2" (1,555 mm); "Z" axis stroke is 9.8" (250 mm); max. material thickness 4" (100 mm). -- Positioning Speed:"X" & "Y" Axis 115 FPM (35 MPM); "Z" axis at 82 FPM (26 MPM); closed loop AC Servo drive system.High precision "Rack & Pinion" system in "X" & "Y" axis & ground ball screws "Z" axis; all axes ride on extra large precision profile linear guideways. -- Boring Unit:3 HP (2.2 kW) - 6,000 RPM motor; (7) vertical spindles on 32 mm centers, (5) in "X" axis & (2) in "Y" axis. -- Machining:(1) 9 HP (6.7 kW) Air-cooled electro spindle with HSK F63 adaptor; variable spindle speeds from 1,500 - 24,000 RPM.(1) 14-Position ATC tool rack mounted to the machine base. -- Operator & Machine Control:PC Front End with: "XILOG Plus" + Windows "XP Pro" Operating System; 17" high resolution LCD; ergonomic keypad.USB Ports, serial ports RS-232 & RS-242 & Ethernet adaptor; programs can be transferred via disk or downloading by wire is possible.All computer components are mounted on a mobile stand.XILOG Plus Offers: Incredible list of functions from: (a) Auto-diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- Additionally equipped with:Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; Onboard cycle optimization, onboard calculator, mirror-imaging, and repeat imaging. -- Complete with:(1) 300 m³/Hr Vacuum Pump; external transformer 208/230/480 Volt; safety enclosure around the spindle carriage; tool length probe sensor; manual centralized lubrication.Includes: (1) Universal Remote Pendant, 7" color display allows for the effective management of all machine functions from manual Jog Mode to loading & execution of a program.The pendant is fitted with a USB port to allow quick load & setup of new programs; safety "bump-stop" bumpers; emergency stop rope & manuals. -- Actual Model is SCM - PRATIX S-15-B.

SCM - PRATIX S-15-C: Flat Table Machine (w/ATC/Boring) + Rake -- SpecificationsSingle 5' x 12' traveling "Bridge Gantry"; stationary aluminum dual vacuum table with: MATRIX Square grid pattern for fixturing parts.Grid pattern allows use of: Vacuum pods or closed cell rope gasketing material; use of spoil boards for "nested base machining".(8) Part location pop-up pins mounted on the table perimeter. -- Working Field"X" Axis: 145.11" (3,686 mm); "Y" axis: 61.2" (1,555 mm); "Z" axis stroke: 9.8" (250 mm); max. material thickness: 4" (100 mm). -- Positioning Speed"X" & "Y" Axis: 115 FPM (35 MPM); "Z" axis: 82 FPM (26 MPM); closed loop AC Servo drive system.High precision "Rack & Pinion" system in "X" & "Y" axis; ground ball screws "Z" axis; all axes ride on extra-large precision profile linear guideways. -- Boring Unit 3 HP (2.2 kW) - 6,000 RPM motor; (12) vertical spindles on 32 mm centers: (7) In "X" axis & (5) in "Y" axis. -- Machining(1) 11 HP (8.2 kW) Air-cooled electrospindle with: HSK F63 Adaptor; variable spindle speeds from: 1,500 - 24,000 RPM.(1) 14-Position ATC tool rack mounted to the machine base. -- Operator & Machine ControlPC Front-End with: "XILOG Plus" + Windows "XP Pro" Operating System; 17" high resolution LCD; ergonomic keypad.USB Ports; serial ports RS-232 & RS-242; Ethernet adaptor; programs can be transferred via disk or downloading by wire is possible.All computer components are mounted on a mobile stand.XILOG Plus Offers: Incredible list of functions from: (a) Auto-diagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- Additionally equipped with:Onboard mini-CAD with built-in programming for writing: Circles, ellipses & angles with only a few keystrokes; onboard cycle optimization; onboard calculator; mirror imaging; and repeat imaging. -- Complete with:(2) 6.4 KW/8.5 HP Vacuum Pumps; external transformer 208/230/480 Volt; safety enclosure around the spindle carriage; tool length probe sensor; manual centralized lubrication.Includes: (1) Universal Remote Pendant; 7" color display: Allows for the effective management of all machine functions from manual Jog Mode to Loading & Execution of a program.Pendant is fitted with: USB Port to allow quick load & setup of new programs; safety "bump stop" bumpers; emergency stop rope & manuals. -- Options IncludeAdditional items pictured are included with this machine. -- Actual Model: SCM - PRATIX S-15-C

--This machine is in an Auction on exfactoryauctions.com-- SHODA MAXXIM 5' x 10' 2-Head CNC Router, with Vacuum Pump – Seller states that machine was run (1) shift from 2002 - 2006, then only a few days per year since! Specifications: Table size 63” x 122” x 29” H, with 3/4” Thick Top. Travels: X-Axis 133", Y-Axis 73", & Z-Axis 10". Max. machining feed speed 590 IPM. Max. positioning speed for X & Y-Axes 1,180 IPM. Equipped with: Moving single-zone vacuum table, with Extra-hard phenolic surface, Front-to-back configuration. (2) 12 kW (16 HP) - 18,000 RPM BT-30 Air-cooled electro-spindle, with Variable spindle speeds 3,000 - 18,000 RPM, AC Inverter, Dynamic spindle braking, Air/Oil mist lubrication. 16-Position Carousel-type automatic tool changer. Features: All Axes with Extra-large precision contour linear guideways. Closed loop AC Servo drives & Precision ground ball screws. Extended extra heavy-duty bridge for full 5' x 10 table coverage. Centralized lubrication system for all spindle & roller bearings, ball screws & guides. Operator Control: FANUC "SERIES 21i-M" Mobile CNC Control, with 10.4" Display, RS-232 Port, PCMCIA Slot, (3) Axes Simultaneous control, Manual pulse generator, Inch & Metric operation, Feed rate & Spindle speed override, Helical interpolation, Full cutter compensation, Background editing features, EIO/ISO recognition. Foot pedal control. Complete with: 2001 TRAVAINI "1-501V1A-460" 40 HP Vacuum Pump, S/N S1433, with Hour meter reading 17,003 Hrs. (10) Toolholders. Dust Manifold. Dimensions without Safety Rails: 202" x 155" x 110" H. Dimensions of Vacuum Pump: 82" x 36" x 65" H.

SHODA MAXXIM 5' x 10' 2-Head CNC Router, with Vacuum Pump – Seller states that machine was run (1) shift from 2002 - 2006, then only a few days per year since!Specifications: -- Table size 63"; x 122"; x 29"; H, with 3/4"; Thick Top. -- Travels: X-Axis 133", Y-Axis 73", & Z-Axis 10". -- Max. machining feed speed 590 IPM. -- Max. positioning speed for X & Y-Axes 1,180 IPM.Equipped with: -- Moving single-zone vacuum table, with Extra-hard phenolic surface, Front-to-back configuration. -- (2) 12 kW (16 HP) - 18,000 RPM BT-30 Air-cooled electro-spindle, with Variable spindle speeds 3,000 - 18,000 RPM, AC Inverter, Dynamic spindle braking, Air/Oil mist lubrication. -- 16-Position Carousel-type automatic tool changer.Features: -- All Axes with Extra-large precision contour linear guideways. -- Closed loop AC Servo drives & Precision ground ball screws. -- Extended extra heavy-duty bridge for full 5' x 10 table coverage. -- Centralized lubrication system for all spindle & roller bearings, ball screws & guides.Operator Control: -- FANUC "SERIES 21i-M" Mobile CNC Control, with 10.4" Display, RS-232 Port, PCMCIA Slot, (3) Axes Simultaneous control, Manual pulse generator, Inch & Metric operation, Feed rate & Spindle speed override, Helical interpolation, Full cutter compensation, Background editing features, EIO/ISO recognition. -- Foot pedal control.Complete with: -- 2001 TRAVAINI "1-501V1A-460" 40 HP Vacuum Pump, S/N S1433, with Hour meter reading 17,003 Hrs. -- (10) Toolholders. -- Dust Manifold.Dimensions without Safety Rails: 202" x 155" x 110" H.Dimensions of Vacuum Pump: 82" x 36" x 65" H.

SHOP SABRE IS 612 CNC Router, 6' X 12' with ATC: -- Specifications:75" x 146" Stationary CNC Router table, moving gantry machine in a front-to-back configuration. -- Equipped with:(1) 8 kW (10 HP) HSD - 24,000 max. RPM Spindle with ISO 30 adaptor. (10) Position ATC wine rack style tool changer. Basic dust skirt and 4" outlet for connecting to Dust Collector. -- Extended Z-axis with 12" clearance under gantry and 16" stroke. -- Fully assembled steel tube frame, tube steel gantry and steel machine base. -- X- and Y- axis travel/positioning via industrial precision anti-backlash X-axis center mount ball screw Y-axis dual drive ball screw with industrial 25 MM precision linear guide rails & bearings. -- "ShopSabre" Brushless A/C Servo upgrade with amplifiers, increases machine speed to 2,100 IPM on X- and Y- axis & 1,000 IPM on Z-axis. -- Control:WINDOWS Based ShopSabre WINCNC industrial controller hardware & software operating system running "ShopSabre" computer system, full size desktop system with 320 GB of storage, 2 GB memory 19" Flat screen monitor, keyboard, mouse; capable of being programmed by any CAD/CAM software that can write in M & G-code. -- Complete with:Assorted ISO 30 tool holders,

SHOP SABRE IS 612 CNC Router, 6' X 12' with ATC: -- Specifications:75" x 146" Stationary CNC Router table, moving gantry machine in a front-to-back configuration. -- Equipped with:(1) 8 kW (10 HP) HSD - 24,000 max. RPM Spindle with ISO 30 adaptor. (10) Position ATC wine rack style tool changer. Basic dust skirt and 4" outlet for connecting to Dust Collector. -- Extended Z-axis with 12" clearance under gantry and 16" stroke. -- Fully assembled steel tube frame, tube steel gantry and steel machine base. -- X- and Y- axis travel/positioning via industrial precision anti-backlash X-axis center mount ball screw Y-axis dual drive ball screw with industrial 25 MM precision linear guide rails & bearings. -- "ShopSabre" Brushless A/C Servo upgrade with amplifiers, increases machine speed to 2,100 IPM on X- and Y- axis & 1,000 IPM on Z-axis. -- Control:WINDOWS Based ShopSabre WINCNC industrial controller hardware & software operating system running "ShopSabre" computer system, full size desktop system with 320 GB of storage, 2 GB memory 19" Flat screen monitor, keyboard, mouse; capable of being programmed by any CAD/CAM software that can write in M & G-code. -- Complete with:Assorted ISO 30 tool holders,

SNX - nVentor 510TG: Flat Table Machine (with ATC/Boring) -- Specifications 5' x 10' MATRIX Table for: "Nested Base" Manufacturing. -- Working Field"X" Axis: 122.2" (3,105 mm); "Y" Axis: 61.45" (1,561 mm); "Z" axis stroke: 16-1/2" (418 mm). -- Positioning Speed"X" & "Y" Axes: 230 FPM (70 MPM); "Z" axis: 65 FPM (20 MPM). -- WorktableFlat table designed for "Nested Base Manufacturing" with: Pneumatically controlled reference stop pins. -- Boring Unit:2 HP (1.7 kW) motor for: Spindle speed from 1,000 to 4,400 RPM; (8) independent vertical boring spindles. -- Machining(1) 12 HP HSD; HSK 63F Electrospindle Router; 1,000 - 24,000 RPM; (1) 8-position in-line ATC rack. -- Operator InterfaceSYNTEC CNC Control System -- Complete with:(1) 15 HP Vacuum Pump; automatic tool touch off probe; manual central lubrication pump for guides & ball screw; safety enclosure devices. -- Actual Model: SNX nVentor 510TG.

2022 CNC controller! Under power & ready to demo! 3-Axis CNC Vertical Milling Machine - Seller has outgrown and upgraded to larger capacity CNC Machining Center. - Table size 10" x 50" x 38” H - Travels: X-Axis: 31", Y-Axis: 17", Z-Axis: 23-1/2" - Quill travel 5" - Quill diameter 100 mm (3.94") - No. 40 Spindle taper - Variable spindle speeds 80 - 4,000 RPM - Rapid traverse 150 IPM - Distance from spindle nose to table (Maximum part height) 23-1/2" - Distance from spindle center to column face 19" - Maximum weight of workpiece 1,320 Lbs. - Maximum work capacities: 1" Drilling & Tapping mild steel & Milling (Metal removal rate/mild steel) 5 cu. in./min. - 5 HP Spindle motor - 560 in-oz Continuous torque D.C. servo motors & Precision ground ball screws for X, Y, & Z-Axes - YEONG DIEN Automatic lubrication unit Includes: - 2022 "PROTOTRAK SMX3" 3-Axis CNC Control/3-Axis Digital Readout (Control defines tool path based upon user defined part geometry), with Pentium PC-processor with 512 MB RAM, 10.4? Color active-matrix screen, Touchpad, (4) USB connectors, MICROSOFT "WINDOWS" Operating system, Program feedrate override & Tool path graphics - ALL MACHINE PARTS "MAXI TORQUE-RITE" Pneumatic drawbar, with 40 - 50 ft. Lbs. of torque - EKSTROM CARLSON "MISTIC MIST 1ST-2LC" 1 Gallon Capacity Coolant Mist Generator, with Adjustable air & Liquid control valve - WALDMANN "ROCIA.FOCUS" 600 Lumen 5,000 K Sealed Housing LED Work Light