INGERSOLL RAND D144IN 85 CFM Non-Cycling Refrigerated Compressed Air Dryer Specifications: Cap. 85 CFM. Max. working pressure 203 PSI. Max. inlet temperature 60° C (140° F). Refrigerant type R-134A. Equipped with: Aluminum braze plate heat exchanger. Variable speed fan. Microprocessor control, with Graphic display, LED Dew point indicator, Energy saving mode, & History of last (10) alarms. Remote alarm signal terminal. High pressure switch. Fully-adjustable programmable electronic drain valve. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

INGERSOLL RAND 5 HP Compressor, 17.1 CFM @ 90 PSI, 80-gal. Vertical Tank.Designed with: 2-Stage (2) cylinder cast iron pump, splash lubricated, inter-cooler, after-cooler, large dia. pressure gauge and air filter. -- Features: -- Ingersoll's T-30 series pump with high performance, proven design and dependable. -- Complete with: -- Tank mounted starter, automatic tank drain, heavy pressure switch, low oil switch, oil level sight-glass and fully covered belt guard; durable painted finish, service-and-operators manual. -- Also includes: -- Ingersoll-Rand refrigerated air dryer "DS35" with max. inlet temp of 140°F, Outlet Temp. 34°F - 40°F pressure dew point, 35 CFM, max. pressure PSIG 232 & 1/2" NPT air connection.

INGERSOLL RAND D144IN 85 CFM Non-Cycling Refrigerated Compressed Air DryerSpecifications: -- Cap. 85 CFM. -- Max. working pressure 203 PSI. -- Max. inlet temperature 60° C (140° F). -- Refrigerant type R-134A.Equipped with: -- Aluminum braze plate heat exchanger. -- Variable speed fan. -- Microprocessor control, with Graphic display, LED Dew point indicator, Energy saving mode, & History of last (10) alarms. -- Remote alarm signal terminal. -- High pressure switch. -- Fully-adjustable programmable electronic drain valve.

INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - MT-4843, ...Manual-Tie Horizontal Baler with Infeed ConveyorSpecifications: -- Cylinder: 8". -- Opening size: 60" x 46". -- Main motor: 40 HP.Equipped with: -- Control panel. -- Oil Cooler – Air-Over-Oil. -- 10' Bale Run-Out Table. -- High-Temp/Low Oil Level Shutdown. -- 48" x 43" x 60" Bale Size.

INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls

IBC - NA-1296A-48: Horizontal Closed-Door Baler Model -- 50 HP Motor. -- Main Cylinder: 10″. -- Bale Size: 30″ x 45″ x 60″. -- Hopper Size: 57″ L x 45″ W. -- Platen Pressure: 134 PSI. -- System Pressure: 3,000 PSI. -- Total Force: 235,620 Lbs. -- New cylinder installed approximately (6) months ago.

IBC - "IBC 4343 X 8 – 50 - 63": Horizontal Auto-Tie Baler -- Model: AT-4343-8-50-63. -- Type: Auto-Tie Baler. -- Motor: 50 HP. -- Cylinder Bore: 8";. -- Bale Size: 43"; x 43"; x Variable. -- Manufacturing Date: 2009.

INTERWOOD C-4010 CASE CLAMP: -- Specifications:Single-Bay pneumatic Clamp with: 108" Long x 60" high x 27" deep clamping cap. -- Equipped with:Movable; vertically positioned clamping beam with (2) adjustable horizontal clamps; (3) adjustable vertical clamps.Horizontal & vertical clamps with: (2) Pneumatic cylinders ea. for a total of (10) pressure cylinders with 2-3/4" stroke. -- Complete with:Built-in Horizontal/Vertical controls with pressure gauges.700 Lbs/Cylinder pressure at 100 PSI compressed air.

INTOREX TX-1300 Hydraulic Copy Lathe Hopper Feed. Overall Specs: -- Full automatic, equipped with (2) hydraulic copiers, (2) tool holder units, (2) back knives, Hopper Feed, Automatic Loading System. and electronic PLC control. Carriage runs on ball screw and tempered/ground guides. -- 1,600 mm (63") Max. between centers; hopper loading capacity of 140 x 140 mm (5.5" sq.) in automatic cycle and 210 mm (8.3") diameter in semi-automatice cycle. -- 10 HP Main motor with a variable speed of 730 - 5100 RPM; 3 HP hydraulic power pack. _ Fitted with PLC programmed logic to assist in setup; All working units (advance carriage, tailstock, tool holder units, etc) are hydraulically powered with independently adjustable speeds. -- Copying system with (2) hydraulic copier knives and traveling steady rest; includes a pre-rounding knife in front of steady; hydraulically powered back knives for doweling or plugging with form tools. -- Includes: Tooling, front safety guard; front mounted electrical panel with easy access to all pushbuttons and controls, and LED RPM display.

IPS - AT-752-50, ...Horizontal Auto-Tie BalerSpecifications: -- Charge box opening: 41" x 50" -- Main cylinder bore: 7" -- System pressure: 3,000 PSI -- Total force: 115,400 Lbs -- Ram face pressure: 63 PSI -- Tension cylinder bore: 6" -- Main motor: 50 HP -- Bale size: 43 x 43" x Variable length -- Bale weight: Up to 1,525 Lbs -- Bale volume: 66 Cu/Ft -- Cycle time: 20 SecFeatures: -- Hopper access door with safety interlock -- Oil Cooler

IPS - AT-874-100, ...Auto-Tie Horizontal BalerSpecifications: -- Main Cylinder: 8"; Bore -- Bale size: 43" x 43" x variable -- Main motor: 100 HP -- Production capacity: up to 11 TPH (OCC) -- Bale tension cylinder: 6" -- Bale weight OCC: Up to 1,580 Lbs -- Conditioned news: Up to 1,775 Lbs -- Cycle time: 15 Sec -- Oil Reservoir Capacity: (400) gallons -- System Pressure: 3,000 PSI -- Platen Force: 150,700 lbs. -- Ram Face Pressure: 83 PSIEquipped with: -- Programmable PLC controls -- 0 - 15 Sec adjustable time delay -- Precompression lid

IPS MODEL TR-1388-100 TWO RAM HORIZONTAL BALER -- 100 HP Motor -- 13" Main cylinder -- 9" Eject cylinder -- Feed Opening 96" x 72" -- RH Eject -- Oil Heater and Cooler -- Bale release door2021 - Re lined, and rebuilt all 3 hydraulic cylinders2024 - Rebuilt 100HP motor, rebuilt 3 hydraulic pumps

IRONWOOD SLR 305 Straight Line Rip Saw Specifications: -- Width capacity of 18" and glue line tolerance up to 8'. -- Variable auto-lubrication system providing consistent lubrication to the chain track and automatically adjusting to the chain feed speed -- Minimum Material Length÷ 203 mm (8";). -- Material Thickness, Minimum- Maximum: 6.35 mm (0.25";) to 85 mm (3.35") -- Distance between Blade and Column 457 mm (18"). -- (8) Hold-down Rollers. -- Work Table Height 800 mm (31.5";). -- Saw Arbor Motor 15 HP. -- Saw Arbor Speed 4,500 RPM. -- Saw Blade Diameter 200-300 mm (8“ - 12“). -- Saw Arbor Diameter 25.4 mm (1";). -- Feed Speed 56 - 131 FPM. -- Feed Motor 2 HP.Equipped with & Features: -- Laser device to ensure straight line ripping entire length of the material. -- Maximum safety protection available with multiple rows of extended anti-kickback fingers and a side protection guard. Equipped with & Features -- (8) Accurately aligned pressure rollers extend from the cast iron machining head to provide absolute butting tolerances, low maintenance, and superior safety -- Solid steel cylindrical positioning rod and quick cam, cast iron fence provide accurate set-up, fast movement, and dust-free operations. -- Table Area (W x L) 950 mm (37";) x 1,450 mm (57";). -- Net Weight 2090 Lbs. -- Dust channel outlet (saw guard) 102 mm.

IRONWOOD DSP-2500 25" Double Sided Planer25" X 8" Double sided planer Specifications: -- Max Working Width 25" -- Max Working Thickness 8" -- Min Working Thickness 6 /16" -- Min Length of Cut 12½" -- Upper Cutterhead Motor 25 hp -- Lower Cutterhead Motor 20 hp -- Feeding Cutterhead Motor 5 hp -- Table Rise/Fall Motor 1/2 hp -- Variable Feed Speed 26-78 fpm (8-24 m/min) -- Cutterhead Speed 5,000 rpm Cutterhead Diameter 5" -- Cutter Knives per Head 96 -- Max Stock Removal ½" total / ¼" per head Table adjustment -- Digital Electrical 460v (3 phase) 88 amps @ 460V -- Dust Port Diameter 2 ports, 6" each ; Dust Extraction Requirements 1,600 cfm @ 4,500 feet/min -- Machine Dimensions (W x L x H) 105" x 45" x 68" -- Gross Weight 7000 Lbs

IRONWOOD P500 508 mm (20") Surface Planer, with Spiral Insert Cutterhead Specifications: 20" (508 mm) max. Width cap., 11.8" (300 mm) max. thickness cap., 0.393 (10 mm) min. thickness cap., 0.325 (8 mm) max. cut depth, 8.6 (220 mm) min material length (un-butted). 7.5 HP Main motor, 3.8" (98 mm) dia. cutter-head with 4.0' (102 mm) cutting circle @ 4,800 RPM; Spiral cutter-head with 75, 2-sided Carbide cutter inserts. Equipped with: Digital Position Controller for Up/Down of the Table. Variable speed by Frequency Inverter from 19 to 39 FPM / 1 HP feed motor. 0.25 HP Motorized support table, 29.4 (748 mm) long x 22.1" (562 mm) wide bed; the table is supported by (4) oversized columns with height positioning via keypad entry within the digital controller. Automatic power off when the top safety hood is opened. Both the infeed chip-breaker and the outfeed pressure rollers incorporate spring-pressured adjustments to ensure positive contact on the workpiece as it is passed through the planer. Two 3” adjustable bed rollers for planing of rough or finished lumber, as well as glued panels. Complete with & more: Magnetic starter, Adjustable bed rollers, (1) 6" dia. Dust outlets. Requires 800 CFM; Instruction Manual & Parts List; Shipping weight 1,800 Lbs. Features: The IRONWOOD P500 Series of 20” thickness planers provide operators with solid thickness planning machinery that offers a powerful cutting performance. This machine features an enhanced heavy-duty cast iron table that is heat-treated and precision ground to assure the greatest rigidity and stability during intense cutting operations. The Ironwood Planers offers enhanced engineering designs and superior build construction for long-lasting and trouble-free performance. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

IRONWOOD FX 750 SINGLE SPINDLE SHAPER WITH FEEDER1-1/4" Spindle Shaper, (6) variable speeds from 3,000 - 8,000 RPM, 7-1/2 HP 3-Phase straight 230 Volt motor.Features fine adjustment aluminum segmented finger fence which can be easily adjusted to fit to cutter size.Features:- 1-¼" interchangeable spindle, but can also be fitted with ½", ¾", 1", 30 mm and 35 mm sizes (additional sizes not included)- Vertical Spindle Stroke 7-1/16"; (180 mm) and 7-1/16"; (180 mm) Max. Tool Diameter (Below Table).- Electronic spindle brake- Forward and reverse spindle rotation with a directional indicator light to ensure safe climb-cutting operations- Raised and lowering of the spindle is adjusted by a precision graduated handwheel read via digital indicator- Spindle rotation controls with direction indicator light- Spindle speed indicator light indicates current RPM.INCLUDES: 4 Roll, 8 Speed feeder !

IST (Industrial Surface Technologies) - PW 4, ...Industrial Pail Washer.Industrial Pail Washer is designed to wash the interior & exterior of open pails ranging from 1/4 to 5 gallons in size or other types of containers.An optional potholder can be used to hold smaller containers in place during washing. The PW is fully pneumatic, features all explosion proof components, and can be located in Class I, Division I hazardous areas. -- Heavy-Duty PW2 to PW12 solvent washers are made of industrial quality painted steel for durable use and trouble-free. An optional stainless steel finish is available to resist rusting and solvent spillsSpecifications: -- Capacity: (4) x 5 Gallons/19 Liter. -- Pump capacity: 46.2 GPM. -- Air Input: 75-100 PSI. -- Air Consumption: 40 CFM. -- OAL 67" x 45 1/2" x 72 3/8". -- Weight : 650 Lbs.