NORTHTECH NT 1000-50HCVS Single-Sided 40" PlanerSpecifications: -- 40" Planer, 40 HP main motor, Helical Head, Adjustable bed rollers 15 mm x 15 mm x 2.5 mm Carbide Insert cutters. -- The spiral cutterhead provides a high chip removal rate, superior surface finish and low noise. -- Powerful 40 HP cutterhead motor makes this planer ideal for heavy-duty planing and meets high production requirements. -- Variable feed speed is mechanical variable from 0 - 90 FPM. -- Power elevation of the feed bed with "727 M Digital Table Adjustment" for fast accurate, and convenient thickness setting. -- Extra heavy rib reinforced cast iron table, surface precision ground. Equipped with: -- (4) Powered steel bed rollers. -- (4) Upper rollers. -- (2) Powered corrugated infeed rollers. -- (2) Powered urethane outfeed rollers. -- Upper and lower limit switches for opening control. -- (4) Dual 50 mm jack screws for raise/lower bed movement; 12" max opening. -- 2 HP Elevation motor with manual adjust. -- Rear E-Stop for added safety. -- Dual 6" dust ports requiring 1,000 CFM @ points of extraction.

NORTHTECH NT-610EL Top & Bottom Planer:24" Wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length.Specifications: -- Cutterheads: 25 HP top head; 20 HP bottom head; 5,800 RPM on cutterheads; (6) row spiral insert cutterheads, Carbide knives 15 mm x 15 mm x 2.5 mm 4-sided -- Feed works: 3 HP variable speed feed with speeds from 20 to 75 FPM; 1 HP motorized raise and lower of bed; DP-525 digital thickness controller; Overhead carpet style feed system Equipped with & Features -- Sectional chip breaker; Hard chrome plated bed; Automatic lubrication for feed system; Amp load meter -- Dust Requirements: 3,800 CFM; (1)10" and (1) 7" dust outlet Seller states this machine has less than 600 Hours of use.

NORTHTECH - 24-HCVS-XL, ...Helical Head Planer24" Width capacity; handles up to 7" thickness. -- 10 HP V-belted cutterhead motor; equipped with: 3" Spiral Cutterhead with (6) rows of (24) 15 x15 x 2.5 mm insert knives (144 total knives). -- 1 HP Feed motor; variable feed speed: 0 - 60 FPM. -- Sectional infeed roller; sectional chip breaker.1/8" Min. stock thickness; 4" min. stock length butted; 13" min. stock length not butted; 1/4" max. depth of cut; 21" x 27" powered table with digital position controller.Complete with: Magnetic motor controls and shavings hood.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i4r NORTHWOOD NW-125 5' x 12' CNC Router, with ATC, Moulding, & Vacuum Pump Specifications: Table size 60” x 144” x 34” H. Equipped with: Moving cast-aluminum single-zone vacuum table, with Front-to-back configuration & (1) Left, (2) Right, & (1) Front Pop-up location pins. F.M. ELETTROMECCANICA 13 kW (17-1/2 HP) - 18,000 RPM Air-cooled electrospindle. 12-Position Carousel-type tool changer. Features: 1-3/4” Dia. Moulder spindle. Safety stop cord on front of table. Operator Control: GE FANUC CNC Control, with 12" Display & Remote pendant control. Complete with: (9) Toolholders. 2021 BECKER "VTLF2.500/0-79" 18 kW (25 HP) - 250 mbar Vacuum Pump, S/N 3650047. Machine Dimensions: 288" x 126" x 138" H. Control Dimensions: 40" x 36" x 80" H. Pump Dimensions: 56" x 56" x 29" H.

NOVA TTF-6200 Dry Kiln System; Unassembled Front Load Kiln Designed to hold 5,100 bd. ft 4/4 Lumber, or 6,120 bd. ft 8/4 Lumber, Using 3/8" (9 mm) stickers. -- Specifications: Interior Dimensions: H 10' 3,5" (3.14 m), D 7'2"(2.19 m), W 25' 3" (7.7 m). -- Loading Door Opening: H 9' 10" (2.85 m), W 25' 3" (7.7 m). 1/8 " Aluminum sidewall bumpers, side hinged doors, exterior installation. -- Average 4/4 capacity: 5,100 bd. ft (12 m3) with 3/8" (9 mm) stickers. -- Average 8/4 capacity: 6,120 bd. ft (14 m³) with 3/8" (9 mm) stickers. -- Price shown is for kiln only. -- High horsepower heat requirement: 128 k BTU/hour. -- Heated Floor System, manuals and blueprints. -- Electrical Requirements: 230 VAC, 1 Phase, 60 Cycle, 25 kw/Hr max.

(2) Unassembled front load Kilns only System with high HP heat and exhaust designed to hold 8,461 bd/ft (20 cub.m) of 3/4" (25 mm) lumber and 10,475 bd/ft (25 cub.m) of 8/4" (50 mm) lumber (35 cbm). -- Kilns internal dimension: Height 12'3-1/2" (3.75 m), Depth 16' (4.88 m), Width 21' (6.4 m). -- Loading door opening of 10' (3.05 m) x 21' (6.4 m); 1/8" aluminum side wall bumpers, side hinged doors, exterior installation. -- High HP will service the heat requirements up to 245k BTU/Hr. -- Electrical requirement of 230 VAC, 3-Phase, 60 Cy; 7.21 kW/Hr. -- System includes: Timber Dry management automated Dry Kiln Controls for each kiln, touch-screen operator interface, data recording, optional remote access, and networking capability, Replacement part kit for a kiln. Manuals & Blueprints

Unassembled Front Load Kiln with Standard Heat and Exhaust -- Interior dimensions: H 17' 6" (5.33 m), D 25' 8" (7.8 m), W 26' (7.9 m). -- Loading Door Opening: height 14'6" (4.4 m), width 25'3" (7.7 m). 1/8" Aluminum Bumper Walls, Top Hinge Door, Exterior Installation. -- Average 4/4 capacity: 25,459 Bd Ft. with 3/4" stickers. Average 8/4 capacity: 33,293 Bd Ft with 3/4" stickers. -- Price shown is for kiln only. -- Standard HP Heat requirement: 382k BTU suitable for drying dark hard woods; Optional high HP Heat requirement: 674k BTU suitable for drying softwood and white hardwoods. -- Electrical requirements: 480 VAC, 3 Ph., 60 Cy; 16.5 kW/Hr. Timber Management Control System with touch screen operator interface, data recording, remote access & networking capability. -- Features: Control room with heated air intake; 12'H x 4'D x 26'W. Top Hinge door opening System includes "230" electric chain hoist. Boiler Room: 12' W x 25' D x 17'6" H. 10' roll up & (1) access door. - Timber Dry Management Network Capability.

NOVA PELLET - N-Eco - 45 kW, ...Pellet Mill Low specific energy consumption per ton of pellet.Specifications: -- Capacity: 770 - 1,200 Lbs/Hr (350 - 550 kG/Hr) depending on the raw material. -- Main drive: 60 HP (45 kW). -- Pellet dimensions: 0.24" - 0.31" (6 - 8 mm) diameter. -- Raw Material: Wood chips, sawdust, wood shavings: 0.02" - 0.06" (0.5 - 1.5 mm) Length; 8 - 14% MC. -- Die: 15" (380 mm) Internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 7.2" (182 mm) Outer diameter.General specification: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with: SIEMENS PCL System, touch screen, and remote modem connection. -- High efficiency motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and end of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE conformity certificate.

NOVA PELLET - N-Midi - 90 kW, ...Pellet Mill with low specific energy consumption per ton of pellet. -- Capacity: 1,765 - 2,315 Lbs/Hr (800 - 1,050 kG/Hr) depending on the raw material. -- Main drive: 120 HP (90 kW). -- Pellet dimensions: 0.24" - 0.31" (6 - 8 mm) diameter. -- Raw Material: Wood chips, sawdust, wood shavings; 0.02" - 0.06" (0.5 - 1.5 mm) length; 8 - 14% MC. -- Die: 15.7" (400 mm) Internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 7.2" (180 mm) Outer diameter.General Specifications: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with SIEMENS PCL system, touch screen, and remote modem connection. -- High efficiency motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and finish of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE Conformity certificate.

NOVA PELLET - N-Plus - 165 kW, ...Pellet Mill with low specific energy consumption per ton of pellet. -- Capacity: 2.2 - 2.8 Tons/Hr (2.0 - 2.5 metric tons/Hr) depending on the raw material. -- Main drive: 215 HP (160 kW). -- Pellet dimensions: 0.24" (6 mm) Diameter. -- Raw Material: Wood chips, sawdust, wood shavings; 0.02" - 0.06" (0.5 - 1.5 mm) length; 8 - 14% MC -- Die: 22.8" (580 mm) internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 9.4" (245 mm) Outer diameter.General Specifications: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with SIEMENS PCL system, touch screen, and remote modem connection. -- High efficiency motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and finish of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE conformity certificate.

NOVA PELLET N-Eco Pellet Plant;Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line: -- Capacity: 770 - 1,1212 Lbs/Hr (350 - 550 kG/Hr). -- Raw Material: Wood chips, sawdust, wood shavings. -- Power: 174 HP (130 kW) Installed, 148 HP (110 kW) average.The Pellet Plant consists of the following main components: -- Wood Chip Hopper: 110 cu. ft. (3 cbm) volume; includes: Discharge Screw, Motor. -- Rotary Drum Dryer: 770 - 1,100 Lbs/Hr (350 - 500 kG/Hr) dry material capacity, moisture reduction from ...40 - 50% to 14%; includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC. -- Biomass Burner: Approx. 220 Lbs/Hr (100 kG/Hr) Wood Chips, max. ...25% moisture content. -- Magnetic Separator. -- Hammer Mill: 770 - 1,320 Lbs/Hr (350 - 600 kG/Hr) dry material capacity, 40 HP (30 kW) installed power, 0.78" x 0.78" x 0.2" max. grain size. -- Dry Chip Silo: 180 Cu/ft. (5 cbm) volume, 83" (2,100 mm) diameter, 264" (6,700 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, Safety System with Spark detection, Rotative Valve. -- Pellet Mill (Type: N-ECO): 770 - 1.320 Lbs/Hr (350 - 600 kG/Hr) capacity, 60 HP (45 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC. -- Packaging Line (Type: N-Pack): Manual operated line includes: Vibrating Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kG Bags. -- Auxiliary equipment: Conveyors, Ducts for Dedusting, etc. -- Shipping to US port, Mechanical & Electrical installation, start-up, and training included.NOTE: Price and delivery terms will have to be reviewed and confirmed at the time the order is placed.

Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line. -- Capacity: 0.9 - 1.3 Tons/Hr (0.8 - 1.2 metric tons/Hr). -- Raw Material: Wood chips, sawdust, wood shavings. -- Power: 335 HP (250 kW) Installed, 295 HP (220 kW) average.The Pellet Plant consists of the following main components: -- (1) Wood Chip Hopper: 706 cu. ft. (20 cbm) volume; includes Discharge Screw, Motor. -- (1) Rotary Drum Dryer: 1.0 - 1.2 tons/Hr (0.9 - 1.1 metric tons/Hr) dry material capacity, moisture reduction from ...25% to 12% (Optional: Dryer for higher moisture contents); includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC (Optional: additional Dust Filter). -- (1) Biomass Burner: Approx. 695 Lbs/Hr (315 kG/Hr) Wood Chips, max. ...45% moisture content. -- (1) Magnetic Separator. -- (1) Hammer Mill: 1.0 - 1.4 Tons/Hr (1 - 1.3 metric tons/Hr) dry material capacity, 100 HP (75 kW) installed power, 1.2" x 0.78" x 0.2" (30 x 20 x 5 mm) max. grain size. -- (1) Dry Chip Silo: 565 cu. ft. (16 cbm) volume, 124" (3,150 mm) diameter, 321" (8,150 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, and Safety System with Spark detection, Rotative Valve. -- (2) Pellet Mills (Type: N-MIDI): Each 1,100 - 1,540 Lbs/Hr (500 - 700 kG/Hr) capacity, 74 HP (55 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC. -- (2) Vibrating Screens. -- (1) Pellet Cooling Column. -- (1) Packaging Line (Type: N-Pack): Manual operated line includes: Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kG Bags, semiautomatic Pallet Wrapping machine. -- Auxiliary Equipment: Conveyors, Ducts for Dedusting, Fan for Silo loading, etc. -- Shipment to US port, Mechanical & Electrical installation, start-up, and training included.

NOVA PELLET - N-Plus Plant Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line: -- Capacity: 1.5 - 2.4 tons/Hr (1.4 - 2.2 metric tons/Hr). -- Raw Material: Wood chips, sawdust, and wood shavings. -- Power: 523 HP (390 kW) installed, 443 HP (330 kW) average.The Pellet Plant consists of the following main components: -- (1) Wood Chip Hopper: 706 cu. ft. (20 cbm) volume; includes: Discharge Screw and Motor. -- (1) Rotary Drum Dryer: 1.5 - 2.0 Tons/Hr (1.4 -1.8 metric tons/Hr) dry material capacity, moisture reduction from ...25% to 12% (Optional: Dryer for higher moisture contents); includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC (Optional: additional Dust Filter). -- (1) Biomass Burner: Approx. 955 Lbs/Hr (433 kG/Hr) Wood Chips, max. 45% moisture content. -- (1) Magnetic Separator. -- (1) Hammer Mill: 1.6 - 2.2 tons/Hr (1.5 - 2.0 metric tons/Hr) dry material capacity, 177 HP (132 kW) installed power, 1.2" x 0.78" x 0.2" (30 x 20 x 5 mm) max. grain size. -- (1) Dry Chip Silo: 1,130 cu. ft. (32 cbm) volume, 154" (3,900 mm) diameter, 476" (12,100 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, Safety System with Spark detection, and Rotative Valve. -- (1) Pellet Mill (Type: N-PLUS): 1.5 - 2.2 tons/Hr (1.4 - 2.2 metric tons/Hr) capacity; 215 HP (160 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC. -- (1) Vibrating Screen. -- (1) Pellet Cooling Column. -- (1) Double Pellet Bin: 159 cu. ft (4.5 cbm) volume. -- (1) Automatic Packaging Machine: (5) bags/minute capacity; includes: Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kG Bags, semiautomatic Pallet Wrapping machine. -- Auxiliary Equipment: Conveyors, Ducts for Dedusting, Fan for Silo loading, etc. -- Shipment to US port; Mechanical & Electrical installation, start-up, and training included.

NOVY 1872V Multi Spindle Vertical Boring Machine 12 Spindles Vertical boring machineSpecifications: -- Table Hardwood 18" X 72' -- Table stroke 0"- 6" -- (12) Spindles in line at 5" center to center, spindle nose with 0" to 1/2" chuck -- (2) drive motor 2 HP with magnetic starter -- (4) Spring loaded hold down -- Savety guard -- Foot swtich

OAKLEY H-5 Double Sided Edge Sander. -- General Specs: With 7.5 HP -1,800 RPM TEFC motor; (2) 8-1/2" x 57-1/2" Cast Iron platens; 8" x 164" abrasive belt, 4,680 FPM belt speed. -- Equipped with: One 11" x 62" Cast iron side table on one side and (1) 19" x 64" cast table on the other side, (1) cast iron radius tilting end table, end table tilts 0 ° - 45°; 6" vertical table travel w/hand wheel adjustment. -- Features: Rubber covered direct drive pulley and idler pulley,Complete with: Magnetic starter with overload protection, (8) dead head radius ends with graphite covering, and (1) steel covered spare head roll.

OGAM PO/M Straight Line Rip Saw;Specifications: -- 20 HP Main motor. -- 24"; throat capacity. -- Max. cutting height: with 12" blade 3", with 16" blade 4". -- Min. diameter of circular saw blades: 8". -- Max. dia. of circular saw blades: 16". -- Min. length of working pieces: 10". -- Variable feed speed from 50 -154 Ft./minute. -- Feeding belt width: 11". -- Spindle Speed: 4,500 RPM. -- 36"; x 60"; table.Equipped with & Features: -- Fence and rail system with one stop. -- Infeed table row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Top row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Split hold down steel smooth roller around blade. -- Split hold down steel smooth roller around blade. -- Steel smooth top hold down roller. -- Chain is in excellent condition!

OGAM - PO-340, ...Dip Chain Gang Rip Saw Specifications: -- 75 HP TEFC Motor, dip chain feed with overhead arbor. -- 4.3"; x 13.3"; Cut capacity. -- 16" Max. blade diameter. -- Power rise and fall. -- 70 mm dia. arbor. -- 2 HP Variable feed speed up to 115 FPM.Equipped with & Features: -- Automatic chain oiler. -- (3) Sets antikickback fingers. -- Adjustable infeed fence. -- Motor load meter. -- Many new saw blades.

OGAM MODEL PO-340 DIP CHAIN GANG RIPSAW ( THis is a Parts machine only )Specifications: -- 60 HP arbor motor, dip chain feed with overhead arbor, 13-3/8" (340 mm) max. rip cap. (between saw blades), 12-5/8" chain width. -- 9-13/16" Mn. to 13-7/8" max. blade dia., 4-3/4" max. depth of cut (manual raise and lower of the spindle), 70 mm dia. arbor runs @ 4,200 RPM; min. board length 19-3/4" (without short stock feed plate-see photo). -- Variable speed belted feed motor 20 to 100 FPM (approximate).Note From Seller: Ogam Gang Rip Saw. 60 HP motor 230/460. I don’t know much about this machine. Bought it used but haven’t been able to hook it up due to our current electrical service. The person I bought it from says it ran well when taken out of service. Can load on a truck.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6n OLIVER 91 D Vertical Hollow Chisel Mortiser Specifications: Chisel dia. 1/4" - 3/4", Max. bit dia. 1/2". Throat 6”. Table size 6” x 36”, with Tilt 45° Left & Right. Cross table travel 4", Vertical table travel 8". Chisel stroke 2-1/2" - 4". Equipped with: 2 HP - 3,450 RPM Spindle Motor. Screw clamp. (2) Hold-downs. Foot pedal. Complete with: Fence.

OLIVER - 34-DD, ...Disc Sander (Double)(2) 30" Dia. steel discs; 5 HP double shafted motor turns @ 1,050 RPM.(2) Steel side tables, 40" x 15", (1) slotted and (1) plain; both tables tilt 10° up and 45° down.(1) Table with 6" manual vertical adjustment; rack travel adjustment by screw & crank. -- Complete with: Magnetic controls; (2) dust outlets; large handwheels for easy adjustments.