GRIGGIO G 1100 Wide belt Sander2-Head, 1,100 mm (43") width cap. -- 1st Head: Rubber covered steel contact roll, duro 85, 220 mm diameter . -- 2nd Head: Rubber covered contact roll duro 50 -- 25 HP motor to drive both head. -- 43" x 85" abrasive belts, electropneumatic abrasive belt tracking, -- Conveyor belt feed, two speed from control panel at 15 and 30 FPM, 0.4/0.7 HP feed drive, automatic conveyor belt tracking, -- 1/8" - 6-1/2" motorized thickness adjustment with LED readout & 0.75Hp gearmotor drive. --Automatic positioning of the working table, rubber covered spring loaded pressure rollers, double infeed and outfeed rubber covered rolls, infeed panel "over-thickness" sensor. --Two suction dust hoods dia. 6" (150mm),

15" Width cap. with 1/4" - 8" thickness opening, 1/16" max. depth of cut; 3 HP single-phase motor belt drives 3-knife, 3-15/64" dia. cutter-head at 5,000 RPM; head with high-speed steel knives, max. thickness 8", min. 3/16"; dual feed speed of either 16 or 30 FPM; 16" x 42" cast iron table, table extensions on infeed/outfeed. Complete with: Magnetic controls, 2" dia. metal infeed & outfeed rollers, open fabricated steel base, and large hand wheel for cutter-head assembly adjustment.

GRIZZLY G4185 2-Spindle Horizontal Boring Machine, Will Accept 3-Spindle Boring HeadSpecifications: -- Max. stock width 7-1/2";. -- Table size 9-3/4"; x 15-3/4";, Max. table height 35";, Table height adjustment 3-1/2";. -- Max. bit cap. 9/16"; (Right-hand threaded), Spindle travel adjustment 3";, Spindle speed 4,000 RPM, Max. speed 12 SPM at 90 PSI. -- Hold-down force 600 Lbs.Equipped with: -- 2 HP 3,450 RPM TEFC Direct drive motor. -- Pneumatic spindle travel. -- 2-1/4"; Pneumatic hold-down. -- Pneumatic foot pedal control. -- Steel stand.Complete with: -- GRIZZLY "G5952"; 2C-W19"; 2-Spindle Boring Head, Max. bit cap. 5/8";, Bit threads 7/16 - 14 TPI Right-hand, Spindle speed 4,000 RPM.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i62 GRIZZLY G7214Z Shaper Specifications: 1-1/4" Dia. interchangeable spindle, 7.5 HP - 3,450 RPM motor; 3,600, 5,100, 8,000 & 10,000 RPM spindle speeds via 4-step V-pulley. 5-1/8" Cap. under nut when using the 1-1/4" spindle, 3-1/4" spindle travel, 34-3/4" x 35-1/2" cast iron table, 43" working height. Table Counterbore: 7" dia. x 5/8" deep Complete with: Adjustable Fence with integrated 4" dust collection shroud, reversing switch & magnetic controls, 3-roll power feeder

GRIZZLY G9984 9" W x 47-1/2" Face Oscillating Edge SanderSpecifications: -- Front aluminum table size 11-3/4"; W x 47-3/4"; L, with 45° Tilt. -- Left end aluminum table size 13" W x 18" L. -- Front & End table height 33" - 41". -- Front & End table travel 8". -- Graphite-coated platen size 9-1/2" W x 47-1/2" L. -- Belt size 9" W x 138-1/2" L. -- Oscillation 1/4". -- Belt speed 4,120 FPM.Equipped with: -- 3 HP - 1,725 RPM TEFC Belt motor. -- 9"; Dia. Rubber-covered aluminum direct-drive pulley. -- 4" Dia. Aluminum idler pulley. -- Belt tracking adjustment knob. -- Belt tensioning. -- Quick-release belt lever.

GRIZZLY G9968 1-1/4" 7-1/2 HP Spindle Shaper, with Power FeederSpecifications: -- Table size 33-1/4" x 91-3/4" x 33" H. -- Table insert dia. 4, 8, &13". -- Spindle length 6". -- Max. cap. under nut 5-1/2". -- Max. cutter dia. 8-1/2". -- Spindle stroke 5". -- Spindle speeds 5,500, 7,500, & 10,000 RPM.Equipped with: -- 7-1/2 HP - 3,450 RPM Motor, with Brake. -- Forward & Reverse spindle rotation. -- Spindle lock. -- 45-1/4" L x 5-1/8" H Cast-iron fence. -- Front table pullout extensions.Complete with: -- 2003 GRIZZLY "G7873" 1 HP 4-Speed 3-Roll Power Feeder, 220 V/60 Cy/3 Ph., with Speeds 13, 26, 33, & 66 FPM.Shaper Dimensions: 92" x 40" x 45" H.Shaper Height with Feeder: 60"Shaper Weight: 1,540 Lbs.Feeder Weight: 144 Lbs.

GRIZZLY G1021 15" STRAIGHT KNIFE PLANER15" Width cap. with 1/4" - 6" thickness opening, 1/16" max. depth of cut; 2 HP single-phase motor belt drives 2-knife reversable, 3-15/64"dia. cutterhead at 5,500 RPM; head with high speed steel knives, max. thickness 6-1/8", min. 3/16"; dual feed speed of either 11 or 22 FPM; 16" x 15" cast iron table, 11-1/3" table extentions on infeed/outfeed. -- Complete with: Magnetic controls, 2" dia. metal infeed & outfeed rollers, fabricated steel base, and large hand wheel for cutterhead assembly adjustment.

GRIZZLY G9981 Heavy-Duty Overarm Pin Router Specifications: Throat 25-19/32". Table size 29-3/4” LR x 21-1/2” FB with Table tilt 0° - 45° Forward, Table height 36-1/2" - 42-3/4".Vertical table travel 8". Spindle speeds 10,000 & 20,000 RPM. Spindle travel 3-15/16". Equipped with: 5 HP - 3,450 RPM Motor. Foot pedal control.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i60 GRIZZLY G0673 5,360 CFM 4-Bag Portable Dust Collector Specifications: 10 HP, Cloth filtration bag size 23-5/8" Diameter x 70" L, 2.5 micron, plastic collection bag size 23-5/8 Diameter x 54" L, Total collection bag capacity 48 cu. ft. Airflow capacity: 5360 CFM, Intake port(s): 5 x 4 in., Sound rating 98 dB Includes: (4) Waste Barrels NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

GRIZZLY - G1026, ...Single Speed Shaper w/Feeder & Mobile Base3 HP - 3,450 RPM Motor; 1/2", 3/4" & 1" dia. interchangeable spindles; 2-1/2" spindle cap. under the nut and with 3" spindle travel. -- (2) Spindle speeds of 7,000 or 10,000 RPM; reversing spindle switch. -- Features: 28-1/4" x 21-3/4" table; 34" table height.Complete with: Magnetic spindle brake, adjustable fence & 3" dia. dust extraction outlet.3-Roll 4-Speed Power Feeder & Mobile Base!

GUBISCH MODEL CP-230 4 HEAD PUSH FEED MOULDER: -- 4-Head (T-R-L-B), working capacity 6" x 4". -- Head sequence: Top 15 HP, right/left 15 HP and bottom 15 HP motor. -- Spindle dia. 1-13/16" all heads with cutterhead speed of 6,000 RPM on vertical spindles and 7,000 RPM on horizontal spindles. Heavy duty, built-in profile jointers on spindles #2, #3 and #4. -- Mechanical adjustment for spindle settings. Spindle adjustments from the front side of machine. -- Variable speed feed drive via 7-1/2 HP, variable speed motor with speeds from 16 to 120 FPM; with (2) powered rollers from the top and (2) powered rolls in the table. -- Infeed table;chromed table plates. --Pneumatic jointers on all 4 heads Amazingly well built Moulder; off-the-shelf parts accessibility; low maintenance/operating costs.

HAAS - 2000XL 2.0, ...Mobile ShredderLow Hours; 2018 YMFG.Specifications & Features: -- Can be used at any location (comfortable transport measurements). -- Easy & quick positioning thanks to crawler track and radio remote control. -- Shreds different materials with just (1) tool configuration. -- High throughput capacity of up to 100 tons/Hr. -- Resistant against foreign bodies. -- Low wear cost and long lifetime. -- Service and maintenance friendly. -- No wrappings; self-cleaning. -- Quiet main drive.

RAFIX - Futura 250: Hinge Boring & Inserting Machine with 1-1/2 HP MotorSpecifications -- High-quality air cylinder (80 mm bore with 650 ft. Lbs of pressure @ 90 PSI) rated for 3-1/2 million 3" strokes.A skilled Operator can bore & insert in (3 - 4) seconds. -- Features: (2) Types of boring depth adjustment: Drawbar style for quick and easy adjustment and a solid stop adjustment for the changing of door thickness applications. This allows changing of the door thickness and still bore the same depth without adjustment. -- Fixed table with: Adjustable back rail to control the tab location. -- Enclosed cutting area for better chip removal with blow off nozzle to assist in chip evacuation and adjustable 2" & 4" vacuum hookup. -- Pneumatic drilling unit with push button control. -- Includes: Adjustable cutting speed control; indicator light; reset thermal circuit breaker; emergency stop button; drill & insert buttons (2-hand activation for Operator safety); rotary switch for pair of pneumatic holddown clamps; 600 mm ruler & (4) flip stops.

HAMMEL 750D HAMMERMILL NEW IN 2019Approx 3,000 Hours --Hydraulic recycling machine with 2 slow running tool shafts --Suitable for Wood (Old wood, construction & demolition wood, rhizomes, green waste, pallets, cable drums) or Rubbish (Domestic waste, industrial and commercial waste) and Paper, paper rolls, aluminum profiles and balesAdvantages: --Increased performance for more throughput --low energy consumption --Very easy to maintain --User-friendly handling by IFM control --Better accessibility of the control panels --Low noise --Tilt funnel with increased inclination for optimum material flow --Mobile on a chain or semi-mobile on a hooklift

HAMMOND DK-1055-B Cyclone Dust Collector w/ After-FilterSelf-contained indoor cyclone type unit w/afterfilter bags, the blower wheel is located on the clean air side and is direct driven by 7.5 HP motor @ 3,600 RPM, performance ranges 3,470 CFM @ 5" H20, 2,727 CFM @ 8.6" H20, 2,200 CFM @ 11.4" H20. -- (1) 10" Dia. inlet and (1) 8.5" x 15" outlet; waste discharges via bottom of unit to (2) 55-gal. drums (drums not included). -- Includes: Multi-exhaust manifold with (4) after-filter bags, 167 sq. ft. cloth area, push button starter.

SPX FLOW HANKISON HPRN200 200 CFM Non-Cycling Refrigerated Compressed Air DryerSpecifications: -- Cap. 200 SCFM at 100 PSIG & 100° F. -- Max. working pressure 232 PSI. -- Max. inlet temperature 120° F -- Refrigerant type R-407C.Equipped with: -- 200 W (1/4 HP) Refrigeration compressor motor. -- Stainless steel cross flow heat exchanger. -- LED Dew point indicator. -- Dry alarm contact. -- Timed electronic drain valve.

SPX FLOW HANKISON HPRN200 200 CFM Non-Cycling Refrigerated Compressed Air Dryer Specifications: Cap. 200 SCFM at 100 PSIG & 100° F. Max. working pressure 232 PSI. Max. inlet temperature 120° F Refrigerant type R-407C. Equipped with: 200 W (1/4 HP) Refrigeration compressor motor. Stainless steel cross flow heat exchanger. LED Dew point indicator. Dry alarm contact. Timed electronic drain valve. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

HARMONY - S60-XDRC: Vertical BalerSpecifications: -- Motor: 20 HP. -- Bale Size: 30";x 60"; ≤ 48";. -- Bale Weight (OCC): Up to 1,000 Lbs. -- Feed Opening: 25″ x 60″. -- Ram Force: 92,360 Lbs. -- Volume: X-Large 7" cylinder. -- Loaded onto your Truck!

GPI/HARMONY - T60XDRC: Vertical BalerPer Manufacturer's Literature:Bale Size: 30";x 60"; ≤ 48";.Bale Weight (OCC): ≤ 1,500 Lbs.Feed Opening: 25″ x 60″.Ram Force: 235,620 Lbs.Volume: X-Large.T60XDRC. Automatic Baler: Textile, clothing Baler & more!Manually loaded recyclable materials: Corrugated cardboard & magazine/newsprint.Conveyor fed recyclable materials: PET & Tetra Pak containers; HDPE; aluminum cans; steel cans; polystyrene; clothing; milk jugs; refuse garbage; extruded aluminum/aluminum siding.Ideal for: Recycling centers; transfer stations; manufacturing facilities; municipalities; other industrial or commercial applications!Features of the "T60XDRC" Automatic Baler 48"; Rear hopper & conveyor system. "Beefy" Conveyor cleats: 38% Thicker than a standard cleat. Large 10" cylinder with: Twin torque tubes. Durable 6" rod. Efficient 30-second cycle time (no load). 146 PSI On the ram face. 20 HP Motor. Heavy-Duty piston pump. Large 100-gallon oil reservoir. Computer engineered frame to withstand force. NEMA 12 Enclosures & UL listed electrical controls. Standard retractable bale dogs. Dual hydraulic Bale ejectors. Oil cooler standard. (8) Slots to band or tie off the Bale. Automatic bale height shutoff with indicator light. Available with: In-ground or above-ground configuration. Meets or exceeds: OSHA or ANSI Z245.5 Safety Standards. Made in the USA.Benefits of the "T60XDRC" Automatic BalerMakes 1,500 Lbs Bale of OCC in just (45) minutes!Makes dense mill-sized Bales ideal for shipping & recycling.Eliminates the need for costly material preconditioning.Ultra dense Bales reducing shipping & handling costs.Large front loading feeding door for bulky materials.Saves space over costly horizontal balers; needs 105 sq. ft.Continuous feeding until Bale needs to be tied.Bales a large variety of materials.Loaded with: Extra features not found in competitive Balers.Designed for years of reliable, trouble-free service.Saves labor & preparation time, making your operation more profitable.The market value of the Bales produced by the SYSTEM TEN SIXTY are high since they can be shipped to the end user without additional processing, Shipping costs are reduced because maximum truck loads can be achieved. Material handling, labor, and storage costs are minimized.

WOLVERINE Two Ram Auto Tie Baler with Infeed Conveyor --Cylinder replaced in 2018 --BALE SIZE Width 46"Height: 31"Length: 61" --BALE VOLUME cu.ft. 50 --CAPACITY cu ft./hour 10,975 --CHARGE BOX OPENING inches 41" x 60" --HOPPER OPENING inches 40-3/8" x 60" --MAIN PUMP 60 GPM --SYSTEM PRESSURE PSI 3500 --MAIN RAM FACE PRESSURE PSI 145 --EJECTOR RAM FACE PRESSURE PSI 84 --SHIPPING WEIGHT 20 TonsBALING MATERIALBulk OCCSolid WasteNewsprintWhole Aluminum CansSteel CansPlasticNon-FerrousHDPE