BELFAB NBM5-25 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 7,500 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (5) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 25 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 18" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (5) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.CALL FOR PRICING

BELFAB LW6-15 Modular Dust CollectorSelf-contained patented modular designed unit for interior use with direct drive 15 HP - 3,600 RPM motor, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (6) High Efficiency 1/8" thick needle felt cloth bags up, 210 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available

BELFAB LW6-15 Modular Dust Collector (HUMMER)Self-contained patented modular designed unit for interior use with direct drive 15 HP - 1,800 RPM motor, 5,000 CFM "HUMMER" centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (6) High Efficiency 1/8" thick needle felt cloth bags up, 210 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available

BELFAB NBM5-20 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 6,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (5) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 20 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 16" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (5) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.CALL FOR PRICING

BELFAB BA-1800C Industrial Air Cleaner (Ceiling Configuration)The BA-1800 industrial air cleaner from BELFAB is a multi-purpose air filtration unit for ambient air filtering. The BA-1800 can be used on a wide range of industrial applications capturing fine dust released into the air therefore improving the air quality in a manufacturing environment. Whether you require a medium or high efficiency system, the BELFAB BA-1800 can be configured to your operating needs for optimal dust control. Suitable for ceiling or ground installation the BA-1800 allows you to specify the best filter arrangement for your application. Features: -- Low installation and operation costs -- Flexible design to accommodate most applications -- Low maintenance and quiet operation -- Multiple mounting options and can be a ceiling or ground configurationIncludes: -- Adjustable louver to adjust the air pattern for better air circulation and comfort. -- Dual inlet 3/4 HP Blower motor with 1,800 CFM capacity -- MERV 8 Pleated filter with MERV 13 Pocket filter -- Sound level 76 dB. -- (2) Modules for high efficiencyApplications: -- Welding and smoke fumes -- Grinding dust -- Wood dust -- Composite dust and other industrial dustAvailable Options: HEPA Filter to allow for the highest standard of air filtration -- Magnehelic guage to clearly indicate the service interval for optimal efficiency

BELFAB LW3-10 Modular Dust Collection System w/ HUMMER BlowerSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 1,800 RPM and 4,600 CFM, HUMMER Blower, 12" inlet -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter 460V or 230V, 3-Phase.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.

BELFAB LW3-10 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 3,600 RPM and 4,600 CFM @ 7" static pressure, standard blower. -- 12" inlet -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter for 208/230/460/600 V.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.

BELFAB LW4-15 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 15 HP - 3,600 RPM motor, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) Drum Adapter Kits for drum collection, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available

BELFAB LW5-20 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive centrifugal fan assembly @ 7" static pressure. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and 16" Inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (5) High Efficiency 1/8" thick needle felt cloth bags, 23.5" dia. x 64" L with 175 sq. ft. total cloth filter area and (5) Filter sleeves for 55 US-gal. drums (Not included) for collection. -- Wired Magnetic starter. -- Non-sparking Heavy-Duty cast aluminum impeller. -- 20 HP, Standard Blower with 5,000 CFM at 3,600 RPM -- Additional options and voltages available.

BELFAB NBM4-20 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 6,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (4) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 20 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 16" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (4) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.

BELFAB LW4-10 Modular Dust Collector. 10 HP, 3,600 RPM, 4,600 CFM centrifugal fan assembly @ 7" static pressure, standard blower. Specifications: -- Self-contained patented modular designed unit for interior use with direct drive -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and 12" inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) plastic collection bags down, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available.

BELFAB NBM3-15 HUMMER SERIES Dust Collector (Modular)Patented Modular Technology; 5,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Interior and exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA safety regulations, this unit has (3) filter modules. -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: 15 HP @ 1,800 RPM High Efficiency "Hummer" TEFC motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 14" Inlet dia. and 17" outlet dia., 495 sq/ft filter surface area. -- Control Panel & Shaker mechanism includes: (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism, all pre-wired. -- Unit comes with: (3) Heavy Duty plastic tilt trucks, rollers for disposal of waste & adaptors. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.

BELFAB NBM7-30 TILT-TRUCK DUST COLLECTOR with Patented Modular Technology: Patented Modular Technology allows it to be purchased for current needs and easily upgraded as required; designed exterior use. Specification: -- Each "NBM" filter module is fitted with: (1) Service door & (2) explosion doors per NFPA safety regulations -- Rated Capacity: Rated @ 9,000 CFM with 9.5" static pressure -- Equipped with: Direct drive centrifugal fan assembly with 30 HP Hummer blower motor, anti-spark cast aluminum impeller, 20" inlet diameter.Unit includes: -- (1) Electrical Control Panel for (2) motors. (1) Soft Start starter for the main blower, (1) for the Auto Shaker -- (7) NBM filter modules, each with (18) 7" x 60" poly-twill cloth filter tubes, 990 sq./ft. total cloth. -- (60) Cu./ft. waste storage cap. via (7) Heavy Duty plastic Tilt-Trucks w/rollers; each with air-tight quick coupling plate.Options:Security System for Air Return (Included); -- (1) 20" Explosion Back Draft Damper, VIGIFLAP with dust sensor system integrated & control panel - ATEX CERTIFIED, -- (1) 24" Fire Damper with status signal. -- (1) 24" Derivation Tee. -- (1) 24" Diameter Abort Damper. -- (1) Single Zone Spark Detector, 38" max, (2) detectors, (1) sprinkler.

BELFAB NBM6-30 CHIP & DUST TRANSFER DUST COLLECTOR Patented Modular Technology and heavy-duty construction for exterior use. Heavy Duty construction designed for interior or exterior use.Specifications: -- Each "NBM" filter module is fitted with; (1) service door & (1) explosion door per NFPA safety regulations, and integrated compact hopper. -- Rated Capacity: Rated @ 9,000 CFM @ 9.5" static pressure, 7,600 CFM @ 10.4 static pressure. -- Equipped with: Direct drive centrifugal fan assembly with 30 HP "Hummer" blower motor, anti-spark cast aluminum impeller, 20" inlet diameter. Unit Includes: -- (6) "NBM" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes; 990 sq. ft. total cloth area (165 sq. ft. per module) w/Continuous Dust Disposal Capacity. -- Pneumatic Chip / Dust Transfer System with (1) 7.5 HP and (1) 5 HP material handling blowers, continuously discharges chips and dust for re-cycling or disposal. -- (1) Electrical Control Panel w/ Shaker Mechanism to include; (4) Interlock Starters; (1) Soft start for the main blower, (2) for the Pneumatic Dust Transfer System and (1) for the shaker mechanism.Security System for Air Return: -- (1) 20" Explosion Back Draft Damper, (1) 24" Fire Damper with status signal, (1) 24" Derivation Tee, (1) 24" Abort Damper and (1) Single Zone Spark Detector. (Optional; pricing upon request)CALL FOR PRICING

BELFAB LW3-7.5 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use with 7.5 HP, 3,600 RPM and 3,500 CFM @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down, 126 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V -- Additional options available.

BENCHMARK 205-HP3 Hot Melt Adhesive ApplicatorHot Melt Adhesive Applicator with: -- Bodine adjustable speed motor. -- Bead dispensing applicator. -- Also includes an extra Bodine adjustable speed motor regulator, for fine tuned glue application.

BRANDT KDF 650 (1650 HIGHFLEX) Edgebander, with 3,339 Hrs. (As of 10/31/23), Pre-Mill & Corner RoundingSpecifications: -- 0.4 - 12 mm (1/2") Edge cap., panel thickness 5/16" - 2-3/16", min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width; line control (NO limit switches) for workstation function. -- Automatic height adjustment with top pressure beam for all work stations, equipped with digital height indicator. -- "PC-16" Program Control with: 21-1/2"; Display, signal infeed light to ensure proper spacing between panels.Equipped with: -- Pre-milling station for cleaning edges of the panel; "Quick change" glue tank for maintenance & glue color change. -- 32"; Dia. Coil table. -- Automatic magazine for strip & coil stock, 3 mm PVC guillotine, (1) drive plus (3) idle roll "pneumatically controlled" pressure sections with digital indicator for quick edge thickness changeover.Workstations: -- End trim (0.33 HP - 12,000 RPM motors), chamfers 0° - 15°; -- Top & bottom flush/bevel/radius trim, bevels 0° - 15° (0.5 HP - 12,000 RPM motors) with insert knives for 2 mm PVC radius. Vertical copy wheels are servo-controlled for quick changeover, programmable from the control panel. -- 2-Motor (4 corners) contour trim for profile corner rounding (two 0.5 HP - 12,000 RPM motors), with insert knives for 2 mm PVC radius. -- Top & bottom scraping for 2 - 6 mm radius, pneumatically controlled blow off nozzles; -- Top & bottom buffing (0.25 HP - 1,400 RPM motors). -- End trim, flush/bevel/radius trim & corner rounding stations have HF motors with electronic brakes; feed chain track speed 42 FPM, 2 HP feed drive.Complete with: -- Operator control panel, PLC (Programmable Logic Control) keypad, and LED readouts; used tooling.NOTE: Actual Model "KDF 650".NOTE: Specifications must be confirmed.Machine Dimensions: 254"; x 50"; x 68"; H.Machine Dimensions with Outboard Panel Support Extended: 254"; x 66"; x 68"; H.

--MAKE AN OFFER!--VERY GOOD CONDITION-- BRANDT KDF 650 (1650 HIGHFLEX) Edgebander, with 3,339 Hrs. (As of 10/31/23), Pre-Mill & Corner Rounding Specifications: 0.4 - 12 mm (1/2") Edge cap., panel thickness 5/16" - 2-3/16", min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width; line control (NO limit switches) for workstation function. Automatic height adjustment with top pressure beam for all work stations, equipped with digital height indicator. "PC-16" Program Control with: 21-1/2” Display, signal infeed light to ensure proper spacing between panels. Equipped with: Pre-milling station for cleaning edges of the panel; "Quick change" glue tank for maintenance & glue color change. 32” Dia. Coil table. Automatic magazine for strip & coil stock, 3 mm PVC guillotine, (1) drive plus (3) idle roll "pneumatically controlled" pressure sections with digital indicator for quick edge thickness changeover. Workstations: End trim (0.33 HP - 12,000 RPM motors), chamfers 0° - 15°; Top & bottom flush/bevel/radius trim, bevels 0° - 15° (0.5 HP - 12,000 RPM motors) with insert knives for 2 mm PVC radius. Vertical copy wheels are servo-controlled for quick changeover, programmable from the control panel. 2-Motor (4 corners) contour trim for profile corner rounding (two 0.5 HP - 12,000 RPM motors), with insert knives for 2 mm PVC radius. Top & bottom scraping for 2 - 6 mm radius, pneumatically controlled blowoff nozzles; Top & bottom buffing (0.25 HP - 1,400 RPM motors). End trim, flush/bevel/radius trim & corner rounding stations have HF motors with electronic brakes; feed chain track speed 42 FPM, 2 HP feed drive. Complete with: Operator control panel, PLC (Programmable Logic Control) keypad, and LED readouts; used tooling. NOTE: Actual Model "KDF 650". NOTE: Specifications must be confirmed. Machine Dimensions: 254” x 50” x 68” H. Machine Dimensions with Outboard Panel Support Extended: 254” x 66” x 68” H. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

--make offer--requires repair-- BRANDT KDF 440 C/AMBITION 1440 FC EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) & 3,359 Hrs. Specifications: Edge & Workpiece Capacity: 0.4 - 8 mm (0.016" - 0.31") Edgebanding thickness, 8 - 60 mm (0.31" - 2.36") Panel thickness, 160 mm (6.30") Min. panel length, 70 mm (2.76") Min. panel width. Equipped with: Adjustable Infeed Fence: Motorized adjustment with 0.049 kW (0.07 HP) Motor. Joint Trimming/Pre-Milling Station: (2) 2.2 kW (3 HP) 12,000 RPM Motors, Left-Hand & Right-hand rotation with Pneumatic jump control for chip-free & clean panel edges. Roller Separating Device: 3 mm x 45 mm (0.12" x 1.77") or 1 mm x 55 mm (0.04" x 2.17") Max. roll cutting, 0.4 - 8 mm (0.016" - 0.31") Strip thickness, 3 mm (0.12") PVC Max. coil thickness. Hot Melt Glue Application Unit: 6 - 10 kg/Hr. (13 - 22 Lbs./Hr.) Melting capacity (Depending on glue type). Workpiece Preheating Unit Pressure Zone: (1) Driven & (2) Idle Rollers, Timed pneumatic pressure controlled, Servo motor positioning for programmable edge thickness changeover. Feed Speeds: 8 - 14 MPM (27 - 45 FPM), 11 MPM (36 FPM) with Contour trimming. BRANDT "POWERTOUCH" Control: With 21" HD LCD Touchscreen monitor. Workstations: Front & Rear End Trimming Unit: (2) 0.18 kW (1/4 HP) 12,000 RPM Motors, with 0° - 15° Automatic chamfer, Pneumatic adjustment & Activation/deactivation of edging material overhang using "POWERTOUCH" control. Top & Bottom Flush/Chamfer/Radius Trimming Unit: (2) 0.55 kW (3/4 HP) 12,000 RPM Motors, 0° - 25° Automatic tilt, with Horizontal & Vertical Tracing wheels, Brushless multi-axis servo motors for positioning of work-unit & horizontal copy wheels for quick changeover, with (3) Positioning options: Profile 1, Profile 2 & Flush trimming. Multi-Functional Trimming Unit: (2) 0.4 kW (1/2 HP) 12,000 RPM Motors for leading & trailing edges vertical corner rounding of panels, Either radius or chamfer cutters can be mounted, 3 mm (0.12") Max. edge thickness. Top & Bottom Multi-Profile (PVC) Scraping Unit: (2) Profiles: 1 mm (0.04") & 2 mm (0.08") or 3 mm (0.12") instead of 2 mm (0.08"), Servo control positioning of vertical & horizontal copy wheels, PVC Scrape collection box, Pneumatic adjustment using "POWERTOUCH" control, Pneumatic disengagement. Top & Bottom Glue Scraping Unit: Flush on panel surface, with Floating insert knives. Top & Bottom Buffing Unit: (2) 0.09 kW (0.12 HP) 2,750 RPM Motors. Complete with: Motorized, programmable hold-down pressure beam with 0.12 kW (0.16 HP) Motor, 1.5 kW (2 HP) Feed motor, 32" Diameter Coil table, Padded sound enclosure. NOTE: CPU needs to be replaced. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

--make offer--excellent condition-- BRANDT OPTIMAT KTD 820 Contour Edgebander Specifications: Designed for straight, curved (contour), or beveled edgebanding. Edgebanding thickness 0.4 - 3 mm (0.02” - 0.12”). Coil cutoff 0.4 - 3 mm (0.02” - 0.12”) (Max. edge height 45 mm/1.77”). Panel thickness 16 - 40 mm (0.63” - 1.57”). Min. radius 25 mm (0.98”). Min. panel length 180 mm (7.09”), Min. panel width 100 mm (3.94”). Feed speeds 0.7 - 4.2 MPM (2.30 - 13.80 FPM). Equipped with: 33” Dia. Vertical coil table. Small glue pot for quick heat-up. Magazine for coil or solid strips. Guillotine. Handheld gluing unit, with Tool balancer & Rotating jib with 8’ Travel. (2) 23-1/2” x 27-1/2” x 35 H Work tables. Large panels can be glued by guiding handheld gluing unit around panel mounted to vacuum suction table. Small panels can be glued by guiding panel along gluing unit mounted to table. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.