Raimann KM310M Rip Saw ValuRip Infeed System One moving Blade

Ramco Wide Belt Sander Model 37T/84 480V

Rayco Edge Pallet Nailer (3) Nail Guns Stacker

Runs well Extra nail guns included

Reckart Board Edger 42" x 6" Capacity No motor - Does have the drive pulleys (had 150 HP previously) (3) Stationary Saws and two sliding

Reckmann Moulder/Sander ready to be loaded!

Rees 10 HP Dust Collection System

Reid N0. 2A Surface Grinder Good Working Condition

Excellent condition Less than 6 hrs on machine

These machines are in good working condition and can be inspected under power. Designed to produce a wide range of spiralled wood roping in a continuous length. Square stock is fed into the machine to produce twisting rope. Manufacturer specs (to be confirmed): - Type L.C.B. 600 - .75 kW feed motor - 1.5 kW drawing unit - 1.5 kW right cutter motor - 1.5 kW left cutter motor - Workpiece diameter: min 8 mm, max 60 mm - Workpiece length: infinite - Feed speed: 15-80 RPM - Spindle diameter: 18 mm - Includes (1) cutter on drawing unit used for rope moulding - 3-4" dust ports - Splitter machine to cut dowels in two - (4) different diameter cutters and dies

Renzo Borgonova Rope Moulder and Splitter

Features - Easy to use main controls - Quick access for changing 3 or 5 inch wide rolls of film or adjusting film stretch - Vigor PLC for reliable operation

Features - Easy to use main controls - Quick access for changing 3 or 5 inch wide rolls of film or adjusting film stretch - Vigor PLC for reliable operation

(2) Rigma Roll Coaters available Model RR-W4CCB 1350 Max capacity

This machine has been cleaned, repaired and checked over, ready for a new home! (2) 3HP motors 460V 3Ph 6 pneumatic stops for use in horizontal or vertical drilling 72" precision machined back fence 6 fence stops, 4 table stops (2) 23-spindle drilling heads, one horizontal, one vertical 3-position turret dept stop on vertical head 5 pneumatic holddowns Magnetic motor controls 32mm spindle centers 10mm collet diameter 1725 RPM spindle speed 90 PSI air requirement 3" max. drill stroke

Ritter R275 Clamp Table Standard Features: - 4'x8' Assembly Table - 30° Vertical Easel - Hold Down Beam with (3) Adjustable Hold Down Cylinders - 1-5/16" Clearance Under Vertical Cylinders - Squaring Bars on Left, Right and Bottom Sides - (4) Universal Clamping Cylinders & Manifold - 706.8 LBS of force at 100 PSI - 2" Cylinder Position Grid Pattern - 3" Bore Clamp Cylinder Housing - Heavy Duty Steel Frame - Perforated Steel Table - 6 port Manifold with 1/4" NPT Regulator/Gage - Adjustable pressure from 20 to 130 PSI - Foot Treadle - (1) Coilhose for Pneumatic Screw Gun - Screw Gun Not Included Technical Data and Specifications: - Usable Table Area: 95" x 45.5" - Work Height: 31" - Footprint: 115" L x 41" D x 79" H - Electrical: N/A - Air: 100 PSI

High performance Drill Tub for pocket hole boring. Foot pedal control

(2) 3 HP Spindle Driver Motors Wired 3-Phase 240 30" X 48" Work Table Surface

Manufacturer’s Specification Model EG800A ELECTRO GLUE RADIO FREQUENCY EDGE GLUER Feeds Left to Right Curing Area: 36” deep by 96” long. Clamping Capacity: 41” deep by 96” long by 2” thick. Side Pressure::Applied by (16) 5” bore by 12” stroke air cylinders on 6” centers. Cylinders are NFPA Standard “Parker” Cylinders Top Pressure: Applied by (4) 3 1/4” bore by 18” stroke air cylinders. Cylinders are NFPA Standard “Parker” Cylinders Generator: A built in 30 kW. Radio Frequency generator cures approximately 3,000 square inches of glue line per minute. The generator is completely enclosed in aluminum housing. The generator also features a vacuum variable for improved efficiency and performance. Operators Control Panel: Includes adjustable cycle timer, necessary meters, indicator lights, control pushbuttons and a two hand, no-tie-down control system for closing the press. System Controls: The system is controlled by an Allen Bradley PLC. The system is equipped with a rotary disconnect that is mounted on the electrical panel access door. All PLC outputs and branch circuits are fuse protected. Safety: An electronic eye prevents closing of the press in the event any objects are inserted from the front. All access doors are interlocked to prevent use of the generator in the event any are open. A safety switch is used to prevent the use of the generator when the press is in the open position. Voltage: Installation: Quoted price includes the services of a Rosenquist technician to assist with the installation of the equipment and training of production and maintenance personnel. Included are all travel and living expenses. Delivery: Currently 12-14 Weeks INCLUDED OPTIONS Smart Cure: This feature utilizes the capabilities of the plc to monitor the cure rate of the adhesive and will automatically end the cure cycle once the adhesive is set. This will eliminate the need for the operator to calculate the amount of glue line and manually setting the RF cycle timer. The system is also equipped with the standard cycle timer. ????????? Automatic Power Control: Eliminates the need to adjust the power control manually. Eliminates human error associated with incorrect power settings. Slightly faster cure cycles will be realized. Recipe Control: This feature allows a specific recipe for a particular species or product to be stored in the PLC. The recipe control system will automatically set the “Edge Pressure”, “Smart Cure Settings”, Dwell Time” & “Power Level” for each recipe. A recipe is recalled by depressing one of the illuminated pushbutton located at the operators control console. Powered In-feed Table: provides a convenient workspace for the operator to compose a set of panels while the press is closed. Pusher is powered by an electric motor that is controlled by an inverter drive. Includes all necessary push buttons and controls. Out-Feed Table: A metal table mounted on the same angle as the press with an area of 96” long x 42” wide. ????

Rotex HICAP 2100 Chip Screen