This mill is ready to be removed from the current location. - 4 Roll Cases 24’’ 2 center 6.5 Diameter 45’ 56’ 62’ 70’HMC All motor controls included - 7 Lumber Decks Flat Chains 10’ 12’ 16’ 20’ 24’ 40’ 82’ 5 Chains WIDC All motor controls included - 2 Log Decks - 28’ Long 12’wide 3 chains stop loader - 14’ long 12’ wide 4 chains stop loader - All motor controls included - Newman Trimmer, drop saws, scrap belt chain 100’x 24’ - Unscrambler 16’wide x 5’high 8 chains - Air Compressor Model SSREP100 HP - Air Dryer storage tank - HMC Model mm10 4 heah block carriage 49’ - HMC Saw Booth - HMC Feed Works - HMC Husk 54’ bottom saw 36’ top saw - 200 HP motor - HMC Log Turner - HMC Drop Belt Live Off Barrer - 10 Headrig saws inserted tooth 54” - Roof Top Chain 10ft 5 Chain - Blower system - Tie-Cant Deck 62’Lx13’ W 4 chain all motors & Controls - Roof Top Lumber Deck 30’L x 13’W 5 chains all motors & Controls

HMC Model HD-40 Carriage Drive 50 HP Hydraulic Unit

Hoffman PU2

Holz-her Cut 85 Panel Saw; under power until 8/21 model 6210

Holzher 1265S Vertical Panel Saw

Holz-her Vertical 1265 Vertical Panel Saw

Holz-her edgebander This machine is still under power and available for inspection.

Year: 2008 Excellent Condition HolzHer Triathlon 1488 Edge Bander Ligmatec Return Conveyor Manual Included Description: PreMill Front & Rear Trim Saws Top & Bottom Rough Cutter Top & Bottom Combination Finish Cutter 3mm Corner Rounding Edge Scraping Edge Buffing Variable Speed 8-18 mpm 8-60mm panel thickness Electrical: 230V 3Phase

Holzher Ergebender

Holz-her Streamer 1054 Edgebander Top/Bottom Trimmers End Trimmers Scraping Buffing Station No longer under power - Ready to ship! Serviced by Holly-her tech.

Holz-Her 1436SEL Primus Edgebander 230 Voltage 60 Cycle 3 Phase Large coil table and capability for coil and strip feeding

1402HF Edgebander 600V /3 Ph / 60 Hz with included transformer Double motor end trim

Stations: -1961M pre-milling unit, two cutter units each with a power of 2.0 kW -1901 M automatic edge-magazine - l 907 M granulate gluing unit - J 926 M pressure unit with three (3) rollers, each with individual pneumatic plunge and pressure control -1916.3 end cutting unit, two motors 0.45kW, 12000 RPM, edge thickness up to 30 mm -1962 flush trimming unit, two motors 2kW, 12000 RPM, edge thickness from 0.4 - 30 mm -1966MOT5 fine/bevel/radius trimming, two motors 1.0 kW, 12000 RPM -1929 profile scraper unit, max. edge thickness 3 mm -1935 edge sanding unit -1965 flat glue scraper -1851 buffing unit -Edge thickness: .04-25 mm -Edge height: 51/66 mm -Panel thickness: 6-45/60 mm - Variable feed speed: 8-22 m/min

20 mm edge capacity PPC221 Controller 8” Screen Motorized Infeed Fence Pre-Milling Unit Automatic Feed Magazine (3 servos) GranUPress Glue System (granulate glue only) Servo Pressure Section HD End Trim (high speed) Rough Top/Bottom Trimmer (3 servos) FineTop/Bottom Trimmer (5 servos) Multiple Profile Tooling 2 sharpers/grooving heads/ tilting HD Profile Scraper (1 servo – in/out) Oscillating Jump Buffer Variable Speed 10 – 25 MPM Motorized Pressure Beam (Belt)

2021 Holz-her 1598 Lumina Single Sided Edgebander See photos for Original Specifications.

Holzma HPL11 Rear Load Panel Saw Still under power. Ready to be removed the end of January 2024

Holzma OPT.HpPS81/38 Panel Saw

Holzma Saw Cutting length 3,200 mm (126"), 95 mm (3.7") cutting height, 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor. Variable saw carriage travel speed 0 - 229 FPM (0 - 70 MPM), constant return of 229 FPM ( 70 MPM). Equipped with: Electronically controlled overhead program fence, rack and pinion driven on both sides, forward speed 131 FPM (40 MPM), return speed 131 FPM (40 MPM), equipped with (6) clamps which open up to 4" (102 mm). The HOLZMA HPP-81 has a CADMATIC control, version 2.2, with (500) cutting dimension memory with color monitor, moving graphics and numeric display. CAD input, floppy disk drive and direct input by keyboard or RS-232 port for possible direct downloading from PC. Complete with: Combi-rollers rear machine table with profile rails at 50 mm centers, front with (3) air flotation tables 24" X 86" (609 x 2,184 mm) each. Includes: Cross cut fence, side pressure device for cross cutting on pressure beam.

Homag BST 500

Homag BOF 311/37/15/R CNC Router Specs (to be confirmed): Homag "Vantage 12L" CNC Router Aluminum router table 60" x 144" working area Gridded Pneumatic reference stops Vacuum gauges Foot pedal control Drill unit Nine (9) vertical spindles One (1) horizontal spindle (two outlet) in X axis One (1) horizontal spindle (two outlet) in Y axis Router 16 HP HSK (quick-change) CW/CCW rotation Variable RPM Ten (10) position rotary tool changer Sound enclosure Front safety mats Safety fencing with interlocked access door Controller Flat screen monitor Standard keyboard and mouse Remote control pendant Also included: Laser projecting unit Ceiling mount