Equipment For Sale

2005 Ponsse Buffalo Forwarder, New Engine Only 500 Hours Mercedes Diesel Engine, Wabasto Heater, Enclosed Cab with Heat and Air Conditioning, Centers are Tight on the machine, New Bucket Steering Cylinder. Operating Weight - 8wd 35,053.5lb Length 36.91ft in Width Over Tires 9.72ft in Height To Top Of Crane 12.31ft in Ground Clearance 2.29ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Ponsse Wisent Forwarder 9500 hours 2 owner Nice machine Currently on the job in use daily 2011 Ponsse Ergo processor with H7 head also available

New Ponsse Buffalo 8wd Log Forwarder, Best in the industry, give is a call today for pricing.

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

Porter Planer Model 700 S/N 5916, Straight Knifes 10HP Motor

Porter Cable 5HP Single Phase Compressor.

The professional horizontal splitter with longitudinal tractor chassis for mobile applications! Complete Posch Splitter, Processor and Packaging lines sold exclusively through Northeast Implement. Better cutting, splitting machines that are fast and safer, call 607-589-6160 to get yours today!

2000 Polvson Wide Band Sawmill - Cap 36" x 25' - Isuzu 75 HP Diesel Engine with approx 1500 hours - Fully Hydraulic - No Set-works - Built in 3 blade edger on the machine that works but the belts are disconnected. 2 blades are moved hydraulically and one is manually adjusted. - Uses 21’6” long blades, 4-6” wide, 19 gauge, 1-3/4” tooth spacing - Armstrong No.2 bandsaw sharpener included - Includes 9 blades, 4" -6" wide and 7 Wood-Mizer new blades- 3" wide Call 800-459-2148 for more info.

2000 Povlsen Wide-bandsaw mill. In good working condition 75hp Isuzu Diesel engine and has approximately 1500hrs on it. Mill can saw logs approximately 36"D x 25' L Comes with an Armstrong #2 bandsaw sharpener and approximately 20 new bandsaw blades.

Powell Scale Model 660/c10W 10, 60’ x 10’, Concrete Platform Scale, Load Cells Mint Condition, 60 Ton, S/N 0593-87 Perfect for Log trucks with 42-45 foot trailer or dump truck Loads. (ref# 93)

Powerfist 1HP Dust Collector

Powermatic Model 221 Planer

1 HP tenoner Approx. 2HPsaw Approx 28" x 16" table

Powermatic OES9138 Oscillating Edge Sander Includes: (5) Sander belts

Powermatic Model 100 12" Planer 3 Phase power

TABLE SAW TOP MEASURES 44" WIDE X 76 ½" LONG TABLE HEIGHT FROM FLOOR 34% " COMES WITH 5 - 12" DADO BLADES 1 HORSE POWER POWERMATIC MATERIAL FEEDER 5 HORSE POWER SAW ARBOR MOTOR 440 VOLT 3 PHASE

POWERMATIC - RB-37, ...Single Head Wide Belt Sander1-Head, 36" width cap., combination sanding head. -- Includes: 4" Dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size: 37" x 60"; with air tensioning, air jet abrasive belt tracking.1 HP Feed drive; variable feed speed of 15 - 30 FPM conveyor speed.0" - 5-1/4" Opening with: (4) Screw jacks; double infeed & outfeed rubber covered holddown rolls. -- Complete with: Magnetic starter; overload protection; load meter; emergency brake.

POWERMATIC - 26, ...Single Spindle Shaper -- Specifications: 5 HP (3.7 kW) - 3,600 RPM Belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley; reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" cap. under the nut; 3" spindle travel w/handwheel adjustment -- Complete with:24" x 26" Cast iron table; miter slot; 7" insert opening; adjustable fence; magnetic controls. -- Actual Model is: POWERMATIC 26

Powermatic TS 80 Shaper Call 800-459-2148 for more info.

POWERMATIC - 26, ...Single Spindle Shaper -- Specifications: 5 HP - 3,600 RPM belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley; with reversing switch. -- 1" Dia. solid interchangeable spindle; featuring 3-7/8" cap. under the nut & 3" spindle travel w/handwheel adjustment. -- Complete with: 24" x 26" Cast iron table w/miter slot & 7" insert opening. -- Equipped with: Adjustable fence and Magnetic controls. - 4-Roll 4-speed Power Feeder.