Electrical For Sale

MARCUS TRANSFORMER 15 KVA, 3-Ph, Auto, 600/480 V Transformer with tap for 440 V.15 KVA Auto-ventilated "dry type" transformer 600 V in (primary); 480 V out (secondary) with tap on secondary for 440V at full capacity. -- Manufactured with grain oriented silicon steel is used. -- Coil windings with high quality magnet wire and the enclosure is made of heavy gauge steel w/ventilation openings. -- UL and CSA approved.

225 KVA 480 volt to 208Y/120

This is an in-line electrical monitor for proportional hydraulic valves with on-board electronics. Designed to monitor those voltages which can affect the control of proportional hydraulic valves in a hydraulic system. Please call for more information. TESTIMONIAL:I am the Operations Manager at GPM Hydraulic Consulting and we have been using the Model PVT-02 proportional valve tester to troubleshoot proportional valves for our customers for many years now. We have purchased test boxes for all of our Consultants to use in the field when troubleshooting. This test box has saved us hours of troubleshooting and in return saved our customers hours of downtime. The box is connected in a series so you can observe the supply voltage, command signal and LVDT (linear variable differential transformer) feedback from the proportional valve while the system is running normally. You can also use the box instead of the PLC to drive the valve to see if the problem is the controller or valve itself. If you have proportional valves, you need to get one of these test boxes. Without the box to troubleshoot, your valves may get changed when there is nothing wrong with them. This box is also very affordable, a lot cheaper than what a proportional valve costs. Last year I went on a consult for a company that made floor panels for BMW. A proportional valve is what controlled the press opening and closing but the press would not move. I connected the test box to their valve in series to watch the power supply, command and feed back voltages. When a command was given to lower the press, a power supply voltage of 22.6 volts was supplied to drive the valve amplifier. Normally the voltage should be 24 volts however, 22.6 was within the acceptable limits of operating the amplifier. The command voltage applied was 3.5 volts. The LVDT feedback voltage should have been 3.5 however, it was reading near 0 at .4 volts. This indicated that the main spool did not move. We then move the selector switch to drive the valve with the box. The voltage was increased to 10-volt manually. The LVDT feedback continued to read .4 volts indicating that the pilot valve shifted but the main spool did not. We removed the valve assembly and found that contamination had caused the spool to stick.

SEVEIN - 12KVA, operates on 50 - 60 Hz, ...Transformer with Neutral wire (on 400 V side). -- General-purpose enclosed, European made, 12 KVA, 3-Phase ventilated Autotransformer. -- Primary 400 V, Secondary 208 - 220 V, 50 - 60 Hz.

Siemens 3000 Amp Main

Siemens 3000 AMP Main

SIEMENS - 75 KVA,... 480 - 380Y/220 Volt 3-Phase Dry Type TransformerSpecifications: -- General purpose: Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 3R ventilated; for indoor or outdoor use. -- Multi-tap (432-504) Primary 480 V (Delta); Secondary 380/220 Volt Y - 60 HZ ventilated. -- Aluminum winding material. -- NEMA Class ANN. -- Catalog # 3F6Y075FCD16.(2) Available; priced per unit; make offer for both!

600 amp Siemens MCC 16 Buckets

SQUARE D - 75T3H, ...75 KVA, 480 - 208 V, 3-Phase Autotransformer Specifications: -- Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 2. -- Multi-Tap (432 - 504 V) Primary 480 V (Delta); Secondary 208Y / 120 V @ 60 Hz ventilated. -- Aluminum windings. -- cULus Listed. (2) Available; price per unit. - Make offer for both!

ASSORTED MOTORS, IN ALL HP & SPEEDS AVAILABLE. Chipper and band mill motors 400HP, US, 585 RPM, DRIP, FRAME 1689S. TOSHIBA 200 HP at 1200 RPM. General Electric 300 HP, 514 RPM, 460 Volt for direct connect, Old style GE frame 17A's and 17B's to redesign up to 500 HP @ 450 RPM. 300HP ALLIS CHALMERS MOTOR 514 RPM, DRIP, 30KS8 FRAME. Many other sizes available CALL FOR YOUR SPECIFIC NEED. From 10HP to 600HP. See gear reducers with various HPs and ratios (see Gear Reducer listings).

125 hp AC motor with manual starter and disconnect 208-220-440 volt 445U frame 1780 RPM $3,750 or any reasonable offer.

I-M MCC

10 HP Oil Transfer Pump.

Electrical

Magnatek GPD 503 VFD

Toshiba 3 phase, 150 hp, TEFC, 890 rpm's, 505UZ frame, very good condition

75 HP 550 Volt 3 phase

US gear reducer: variable speed; 5 HP. Price $500.00. As-is/where-is. (Inv. # G-14).