Equipment For Sale

2017 Takeuchi TB290 Excavator , air & heat, has a thumb, NICE MACHINE , 4132 HRS

78" Bucket, EH Controls, Hand Controls, ROPS, Wide Rubber Tracks

2 Speed, A/C, Aux Hydraulics, Cab Enclosure, EH Controls, General Purpose Bkt, Hand Controls, Hi-Flo, Joystick, Rubber Tracks

2014 Takeuchi TL8RW Skid Steer with 2,510 hours. 74.3 HP on Diesel powered Kubota Engine, 2,100 lbs Lift Capacity (35% Tipping) 3,000 Lift Capacity (50% Tipping). Max travel speed 4.6 mph. Dump Height 93.3 in. Dump Reach 28.7 in. Operating Weight 8,630 lbs Height 83.9 in. Width 62.2 in. Length 135.1 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 12937551 2006 Takeuchi TB1140 Excavator 1700 hours 95% UC

2017 TAKEUCHI TB2150 EXCAVATOR 2,900 HOURS 34,646 OPERATING WEIGHT DEUTZ ENGINE PLUMBED RUBBER OVER STEEL TRACKS BLADE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2007 Talbert DW-55 SA Utility Trailer Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Talbert Lowboy -GVWR 95,600 GAWR ALL axles 20280 -255/70R22.5 LRH 22.5x8.25 rims at 828. KPA 120 PSI COLD DUAL -Model TLW-35-FG-Bvt1 35 ton capacity 29ft long on flat bed by 8’6” Spring suspension -35 ton capacity -29ft long on flat bed by 8’6” -Spring suspension

TANA- SHARK 440DT, ... Portable Dual Shaft ShredderSpecifications: -- Approx 3900 Hours and New in 2015 --Bolt-on cleaning combs for easier maintenance --Magnet conveyor improvements - Discharge side to be selected from TCS + hydraulic magnet adjustment during operation --Rated power (SAE J1995) 399 kW (535 bhp) @2100rpm --Nominal torque 324,530 ft-lbs 440 kNm --Rotor length 9 ft 10 in --Number of rotor knives 33 / 44 --Screen sizes Available from Tana- 1.9", 3", 3.5", 3.9", 4.3", 4.7", 5.5", 6.6", 8.7", 10.8" --Screen area 29.6 sq ft

16" Blade cap., 3-3/4" max. cutting height, 5 HP - 3,600 RPM direct drive motor, arbor tilts 45ø, 44" x 40" cast iron table size, table with miter gauge slot. -- Complete with: Rack & pinion fence and large hand wheels for easy adjustments.

TANNEWITZ - XJ, ...Table SawSpecifications: -- 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor Table Saw with a 1-piece main table; table size 42" wide x 44-1/2" deep. -- Base formed from hot rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. handwheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: Extended rack & pinion adjustable rip fence for greater ripping capacity; left- & right-hand T-slot miters. -- 16" Blade dia., 4" dado width cap.; 4" cut depth at 90°; 3" cut depth at 45°. -- Equipped with: Taper pin miter with micrometer adjustment on fence, magnetic controlled off switch, and 6" dust outlet with auxiliary rear opening for easy access. -- Power safety electrical breaker box included. Please NOTE: No blade guard.

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

Well maintained forklift; 8' forkls; Cummins diesel engine; side shift

MLS Number 12496078 2020 Taylor X300S Forklift 7923 hours 21900 pounds capacity 48860 chassis weight 60" forks 204" lowered height 272" max fork height Diesel 5 hydraulic functions Drive tires 40%. Steer tires 90% Sideshifter and frame handler

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5k TAYLOR 8' W 6-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (36) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: "8000120" Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

2018 Taylor TX300S Pneumatic Tire Forklift with 8,991 hours on a Diesel Engine. Overhead Guard, Load Backrest, Enclosed Cab sideshifter/Forkpositioner. Fork Length 114", Lowered Ht. 132" Max Ht. 236" Free lift 132". Tires with 100% tread remaining. Length 15 ft 0 in Width 9 ft 0 in Height 13 ft 0 in Weight 48,600 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Taylor Forklift, runs & works good

1968 Taylor Cable Skidder 453 Detroit New Front Tires, 90% Rears Bear Claw Chains Front and Rear At 75% Runs and Operates Good

2018 Taylor THC300S Cushion Tire Forklift with 3,759 hours on a diesel engine. Fork Positioner (leaks slightly) , Overhead Guard and Enclosed cab. Fork Length 72", Lowered Ht 123" Max height 121". Forks slightly bent as well as grab handle. Gross Weight: 42,300 lbs Approx. Dimensions: 103" Wide X 178.5" Long (Less Forks) X 144" High Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.