Equipment For Sale

1968 Taylor Cable Skidder 453 Detroit New Front Tires, 90% Rears Bear Claw Chains Front and Rear At 75% Runs and Operates Good

TAYLOR - 800036: 7' W, 12-Section Semiautomatic Pneumatic Clamp Carrier with Flattener & TightenerEquipped with: -- (71) 32"; Cap. Clamps with: 4-5/8"; W x 3-1/2"; H Jaws. -- Air motor drive. -- Dual foot pedal control.Complete with: -- Pneumatic Panel Flattener. -- Pneumatic Clamp Tightener.

MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP

Taylor Forklift tight machine

TAYLOR - 20-Section: Clamp Carrier Specifications -- 8-1/2' Width cap. -- 39" Max. clamp opening; 2-1/2" Jaw height. -- Approx. (4) clamps per section.Equipped with: -- (75) Clamps total. -- Pneumatic tightener. -- Pneumatic panel flattener.Complete with: -- Air drive carrier rotation. -- I-Beam chain assembly.NOTE: Already taken down.

TB Woods 150HP Soft Start

Teco Induction Motor, Type AEVFACLQ9 Frame, 160 M 20 HP RPM 3520 Volts 230/460 3 Phase. This electric motorwas taken NEW off a LeaderMac 523 SpeedMac. There are 2 of these. Call 800-459-2148 for more info.

10 HP 575 volt unit. Has between 25-27 CFM. RPM: 1745

Tregarne WoodWelder - Brand new - Operator Manual included Call 800-459-2148 for more info.

Tregarne Wood Welder New in Box

2002 TEREX HR32 EXCAVATOR 5,500 HOURS BLADE THUMB 60" TILT BUCKER 48" CLEAN UP BUCKET 30" DIGGING BUCKET 12" TRENCH BUCKET 17,800 OPERATING WEIGHT GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM

175 hp, Cummins, 6 cylinder,diesel, 9' bucket, 20.5 R25 tires

CAT C4.4 TIER4F DIESEL ENGINE (110HP) 5’ X 16’ SCREEN 6.5 CU YD HOPPER CAPACITY RADIAL CONVEYOR W/180 DEGREE SWING AND VARIABLE DISCHARGE HEIGHT 80,700 LB OPERATING WEIGHT HEAVY DUTY TRACK UNDERCARRIAGE LOW LEVEL REMOTE GREASING

2015 Terex R200S Skid Steer with 3,377 hours. 60 HP, Lift Capacity at 35% 700 lb., Lift Capacity at 50% 2000 lb. Operating Weight 6370 lb. Overall Length with Bucket 133.6 in Overall Height to Top of ROPS 77 in. Width 66 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

C18 Cat 765HP, New valve banks.  Remote control FOB CANADA - FOR DELIVERY OPTIONS CALL

Terex TBC430T Wood Chipper 1800 hours Remote control UC 85% Cat engine

DEUTZ TD 2.9 L04 (60HP) LARGE CAPACITY BIOMASS HOPPER 78'9" DRUM CENTRES GIVING A MAX STOCKPILE HEIGHT OF 34'6" AT 25 DEGREES 42" WIDE 3 PLY BELT HYDRAULIC FEED HEIGHT ADJUSTMENT HYDRAULIC FOLD FOR TRANSPORT CRAWLER TRACKS WITH PENDANT CONTROL SYSTEM 2 SPEED TRACKING LOW LEVEL GREASING

CAT C4.4 TIER 4F DIESEL ENGINE (110 HP) FEEDER HOPPER W/HYD ADJUSTABLE LANDING LEGS VARIABLE SPEED CONTROL WITH BIOMASS DISCHARGE AUGER CONVEYOR 73’ 10” DRUM CENTER TO CENTER 48” WIDE 3PLY BELT HYD RAISED AND LOWERED BOOM HYD FOLD OVER FOR TRANSPORT FULL LENGTH SIDE SKIRTING ALONG MAIN CONVEYOR TWIN HYD DRIVE DISCHARGE CONVEYOR UNDERCARRIAGE WITH HEAVY DUTY TRACKS RADIO REMOTE – START/STOP FEEDER, RAISE/LOWER DISCHARGE, REVERSE AUGER HEAD DRUM BEARING GAS CARTRIDGE AUTO GREASING LOW LEVEL GREASING – TAIL DRUM

2015 Terex R070T Rubber Track Skid Loader, 568 Hours, (Same As ASV RT30), 48 Bucket, Cab, Just Serviced, 30 HP Engine, 48 Wide, Joystick Controls.

2014 Terex Phoenix 3300 trommel -8900 hours -Rebuilt engine and new main pump -Belts are in good shape -Has self-cleaning tail pulleys -New fluids Everything works as it should !!!