Equipment For Sale

Nielson Model 800

Circle Saw Grinder 110V 3 phase

Nielson Circle Saw Grinder #20372 - SN 3007 - 3 phase - 110V - It will grind 24" - possibly 30" - It will do alternate bevel - good condition Call 800-459-2148 for more info.

2007 | 14,075hrs

1999 | Propane

3 AVAILABLE NOKIAN FOREST KING F2 750/55-26.5 TIRES AT 80% 3500 EACH

---Liquidation Item---Palletized & Ready to Ship with Free Loading! 5,000 CFM 15 HP Enclosureless Baghouse Dust Collector https://exfactoryauctions.com/Detail/DC-230843/event/L051624$1

Nordfab Air Blower with 40HP Motor

Northern Automation Lumber Stacker with Lift Table. 3 phase. 36"-192" capacity. #C935

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i67 NORTHFIELD (MONARCH) UNIPOINT 16" Heavy-Duty Radial Arm Saw Specifications: Base size 25” x 45” x 33” H. Table size 25” x 48” x 35" H. Max. depth of cut 4-1/2". Max. dado cap. 1-9/16". Max. cross cut cap.: 25" with fence in rear position, 17-1/2" with fence in normal position. Max. rip cap.: 31" with fence in rear position, 23-1/2" with fence in normal position. Angle cap.: 45° Left tilt, 70° Right pivot, 45° Left pivot. Arbor dia. 1". Equipped with: Ram & track travel system, with Rear stop bar with (6) 7/8" Stops, Equipped for left & right compound angles. Automatic blade return device.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6q NORTHFIELD 12HD 12" Heavy-Duty Jointer Specifications: Max. depth of cut 5/8", Rabbeting cap. 5/8" x 12". 17” x 51-1/2” x 32-1/2” H. Outfeed table size 17” x 43” x 32-1/2” H. Equipped with: 3-1/2” Dia. 3-Knife Cutterhead. 5 HP - 1,735 RPM Motor. 52” L x 5-1/2” H Cast-iron fence, with 0° - 45° Tilt. Swing-away guard.

NORTHFIELD - #4, ...Table SawSpecifications: -- 16" Dia. saw blade cap.; 7.5 HP - 3,450 RPM motor; 1" dia. arbor; 13/16" dado cap. with: Thin collar; blade tilts: 0° - 45°; 32" rip cap. with T-type fence.

Northfield #4 Table Saw - In great working condition - Size: 4 - Serial: 62354 B - Northfield Special Heavy-Duty Motor: - Type: Arbor - HP: 7.5 - RPM: 3450 - Phase: 3 - Cycles: 60 - Code: L - Frame: J58 - Enclosure: TEFC - Winding: R & M - Serial: MS92250LV - Temp Rise: 55°C - Volts: 220 / 440 - Full Load Amps: 21 / 10.5 - Size information: - 1390 lbs. - 44" L x 36" W x 44" H - Weight & measurements are not inclusive of pallet (not shipping info) Call 800-459-2148 for more info.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i66 NORTHFIELD (AMERICAN WOODWORKING COMPANY) UNIPOINT X-36AF 16" Heavy-Duty Radial Arm Saw Specifications: Base size 29” x 46” x 35” H. Table size 27” x 57” x 36-1/2" H. Max. depth of cut 4-1/2". Max. dado cap. 1-9/16". Max. cross cut cap.: 25" with fence in rear position, 17-1/2" with fence in normal position. Max. rip cap.: 31" with fence in rear position, 23-1/2" with fence in normal position. Angle cap.: 45° Left tilt, 70° Right pivot, 45° Left pivot. Arbor dia. 1". Equipped with: 5 HP - 3,450 RPM Motor. Ram & track travel system, with Rear stop bar with (6) 7/8" Stops, Equipped for left & right compound angles. Automatic blade return device.

1/2 and 3/4 yard grapples. Northshore grapples in comparrison to other manfactures are larger in size. There 1/2 yard grapple is same as 3/4 yard. Sizes available up to 2 yards.

6” width capacity 8” thickness capacity 30 hp main motor, 1.4 hp feed motor 3 hp blower motor…460 volt 3 phase 559 rpm blade speed digital oiling

Northtech NT 16R-10 Tilting Arbor Table Saw Infeed Roller 10 HP Motor

6” x 24” capacity 2 sided knives on helical cutter head 534 hours in meter

NORTHTECH NT 1000-50HCVS Single-Sided 40" PlanerSpecifications: -- 40" Planer, 40 HP main motor, Helical Head, Adjustable bed rollers 15 mm x 15 mm x 2.5 mm Carbide Insert cutters. -- The spiral cutterhead provides a high chip removal rate, superior surface finish and low noise. -- Powerful 40 HP cutterhead motor makes this planer ideal for heavy-duty planing and meets high production requirements. -- Variable feed speed is mechanical variable from 0 - 90 FPM. -- Power elevation of the feed bed with "727 M Digital Table Adjustment" for fast accurate, and convenient thickness setting. -- Extra heavy rib reinforced cast iron table, surface precision ground. Equipped with: -- (4) Powered steel bed rollers. -- (4) Upper rollers. -- (2) Powered corrugated infeed rollers. -- (2) Powered urethane outfeed rollers. -- Upper and lower limit switches for opening control. -- (4) Dual 50 mm jack screws for raise/lower bed movement; 12" max opening. -- 2 HP Elevation motor with manual adjust. -- Rear E-Stop for added safety. -- Dual 6" dust ports requiring 1,000 CFM @ points of extraction.

NORTHTECH NT 400EL Double Head 16" PlanerHeavy Duty Chain Drive Series Double SurfacerSpecifications: --15 HP Top, 15 HP Bottom Head Motor -- Dual (6) Row Helical Cutterhead with four sided 15 x 15 x 2.5 mm Inserts -- 5,175 RPM solid steel cutterheads with Class 7 NSK bearings -- Cutterhead dimensions: 5"; dia. x 16"; long -- Operating decibel rating of 79 dbProduct Dimensions: -- Working thickness 10 - 155 mm (3/8"; - 6-1/2";) 8 mm min. on request -- 13"; Min. working length -- 16"; Maximum widthFeed System: -- 3 HP Feed motor -- Carpet feeding spike system with (644) spikes -- Feed speed 25 - 85 FPMFeatures: -- 1 HP Elevation motor -- Mechanical variable speed -- Digital control panel with 3 amp meters -- Chrome bed plate 0.01mm (0.004";) thick -- Passline at 32"; -- Amperage requirement: 230V / 115 AMPS, -- (2) 6"; Dust ports requiring 981 CFM @ each point of extraction -- Automatic lubricating system with low level shut off -- UL/CE Certified electrical components -- Includes operator’s manual and parts book -- Net weight: 5,990 Lbs -- Machine / Packed weight: 5,990 Lbs / 6,195 Lbs -- Machine/Packed dimensions (L x W x H): 98"; x 50"; x 70"; / 101"; x 46"; x 80"; -- One year parts warrantyNOTE: All machines are tested stateside prior to shipment providing trouble-free start-up.