Equipment For Sale

2019 Rottne F15D -7500 hours -Tight and dry -Serviced every 500 hours -Two sets of ECO tracks and front chains Ready to work!!!!! Low Hours!!!!!!

2019 Rottne F15D 8 Wheel Forwarder, One New Set of Eco-Tracks, One Set of Chains, Espar Heat, Enclosed Cab Heat, Air and Radio, Engine has 7,500 Hours, NO DEF, Good Center Section Tight, Ready For the Woods. Width: 114 in Length: 387 in Transportation height: 150.5 in Service weight: 41,225 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 HULTDINS SG360S (SN: 027-25226) BLADE 8-WHEEL, 15 TON FORWARDER CAB 710/45-26.5 TIRES

1998 Rottne SMV with Processor Head, RG81 Crane ,Engine Hours Reading 11.000 Hours, Rebuilt Hydraulic Pump, Enclosed Cab with Heat and Air Conditioning, Good Tires, One Set of Tracks Good Centers Operating Weight - 38,580.9 lb Length 31.5ft in Width Over Tires 9.45ft in Height To Top Of Crane 12.14ft in Ground Clearance 2.25ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Rottne Rapid, will take any reasonable offer

12K Hours 561 SP Head New Computer Pre Heater Leveling Rotate Runs Great

If you run an industrial business, you likely need numerous pieces of specialized equipment that can be difficult to find in a hurry. Row Electrical Equipment, Inc., stocks a vast inventory of industrial motors, motor starters, transformers, and other electrical equipment that is used in a wide variety of industries. We try to minimize down-time by having available a variety of equipment that is always important in a "need it now" situation.

MOTORS - MOTOR STARTERS - TRANSFORMERS - MISC ELECTRICAL EQUIPMENT - PHASE CONVERTERS

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6s ROWLEY & HERMANCE Sash Sticking Machine Specifications: Table size 5” x 46”. Equipped with: 3 HP - 1,750 RPM Motor. (2) 2” Dia. x 2” W Serrated upper feed rollers.

Rucker Hydraulic Unit

RUF RB440 Briquette Press (2) Systems available

RUF Briquette Press More info coming!

// This item is up for Auction at exfactoryauctions.com // https://bit.ly/40zDLa2 RUVO Door Lite Cutout machine Model 9715W Specifications: 7' Max. door height x 3' max. door width; max. lite sizes in 3' door 30" x 60", 24" x 64", or 20" x 66"; lock sizes 1-1/2", 1-5/8" and 2-1/8". Deadbolt sizes 1-1/2", 1-5/8" and 2-1/8"; corner radius 1/4" for both lite and faceplates; backset switch selectable for 2-3/8" or 2-3/4". "Broken Arm" design for lite cut outs in wooden doors. Machines wood or steel doors (to 16 ga.) with 3 HP cutter head, 2-speed operation with 2,400 or 4,700 RPM; (2) horizontal stations, features door length adj. and end clamps. Equipped with: Boring for lock, deadbolt, and latch, (2) Back fences, steel hole template locating pin, template clamp, end clamp cylinders, flip stop assembly on the back fence. The 9700 control box provides the operator with exceptional versatility allowing independent operations for special house orders Recommended cutter head ONSRUD 15-05 cutting bit with reverse flute (interchangeable with EKSTROM-CARLSON bit 088-1680). Ruvo's 9700 Door Lite Cutter series machines are manufactured to last under heavy use and are the finest available to steel and wood door suppliers. The heavy-duty, easily operated cantilever cutting arm is key to the model's speed and efficiency. After the lite template and door are pneumatically clamped, its arm follows the template edge as a 1/2" cutter bores through the door.

RYE R 72 2-Spindle Automatic Rotary Copy ShaperSpecifications: -- Cutting circle cap. 24" - 80", Max. square cap. 56", Max. rectangular shape cap. 71" x 35-1/2", & Max. length capacity 50". -- Table size 68" Dia. x 40-1/2" H. -- Table speeds 0.3 - 3 RPM. -- Spindle speed 9,000 RPM. Equipped with: -- (2) 1-1/8"; Dia. High frequency floating spindles, with Frequency changer. -- 6-1/2"; Dia. Center clamp plate.

RYE Mdl 320 Type R28 Routing Machine

S&W Model 700 Sawmill 4500 hours 1600bf per day Capacity 26' long x 52" Heavy duty mill Believed to be a 1994

30 HP Bandmill

SAC F 430 430 mm (16.93") Jointer Specifications: Max. depth of cut 8 mm (0.31"), Rabbeting cap. 1/3" x 16". Infeed table size 430 x 1,570 x 860 mm (16.93” x 61.81” x 33.86”) H. Outfeed table size 430 x 1,280 x 860 mm (16.93” x 50.39” x 33.86”) H. Cutterhead speed 5,000 RPM. Equipped with: 120 mm (4.72”) Dia. 4-Knife Nickel-Chromium Molybdenum Steel Cutterhead, with "TERSA" Knives. 3 kW (4HP) Motor, with Brake. 1,200 mm L x 160 mm H (47.24” L x 6.30” H) Aluminum fence, with 0° - 45° Tilt. Swing-away guard. Knife setting gage. Complete with: Spare Knife Set (Needs sharpening).

SAV S 53 S Single Sided Planer20" Width x 1/8" to 12" opening; 6.6 HP motor, 4-knife 4-3/4" dia. cutterhead rotates @ 5,000 RPM, max. cutting depth 5/16" -- (4) fixed feed speed settings 13 - 23 - 36 - 59 FPM. Equipped with: -- (1) Steel outfeed roller, (2) adjustable bed rollers, sectional infeed roller, sectional chip breaker, manual raise & lower w/mechanical digital readout; -- Table size 41" x 21". Complete with: -- Emergency stop, magnetic starter w/overload protection & 5-1/2" dia. dust hood.

SAC - PRIMA K 630, ...Single Head Sander24" Width cap single head. -- Combination sanding head with: 4-3/4" Dia. grooved rubber contact roll & 2" wide polishing platen. -- 7.5 HP Motor; abrasive belt size 25" x 75" with air tensioning & electronic abrasive belt tracking. -- Dual feed speed 15 or 31 FPM; infeed & outfeed rubber-covered holddown rolls. -- 6-1/4" Motorized thickness adjustment by 0.5 HP motor with: LED Readout, and automatic part thickness adjustment; micro switch; 7" dust hood opening. -- Complete with: --: Emergency stop button, motor load meter, and selection of belts.