Equipment For Sale

New Model! 215 Super. Cab with heat & ac, High Flow hydraulics, 7 way multi-function joysticks, foot throttle, air suspension seat, radio, 2 speed, powered quick hitch, smooth ride, iso/h pattern controls, block heater, parallel/vertical lift, 72" Landscape Bucket

MLS Number 12576999 2012 JCB 155e Skid Steer 2040 hours Perkins Diesel Cab All gauges work Pneumatic tires 100% No leaks

2015 JCB 930 Pneumatic Tire Forklift with 1,696 hours on a diesel engine. Quad Mast, Overhead Guard, Load Backrest, Lever Transmission and side shifter. Fork length 48", Max Ht. 336". 85% tread remaining on tires. Weight 12,900 lb Length To Fork Face 11.68ft in Overall Width 7.22ft in Overall Height 8.4ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Come Check This Out!! 49 Horsepower no After-treatment Engine! 12.8 Inch Wide General Purpose Tracks! Suspension Seat! Seat-mounted Joystick Controls for both Loader and Excavator ends! ISO/SAE Change Over! PMS ( Power Management System)! 8 foot Extending Dipper- Dig Depth of 10- feet 1 - inch ! Side- Shift Excavator end! Hammer/ bi-directional excavator pipework! Skid Steer Loader Quick Hitch! Skid steer 26.4 gpm Proportional Hydraulic Couplings With Constant Flow Capability! 3/8-inch 11.8 gpm Proportional Hydraulic Couplings! Loader Float! 110 V Engine Block Heater!

2016, 9604 hr.13000# lifting 15' extension, with the grapple forks . air tires like New. (not pictured) This machine is well maintained. NO issues known of. A GOOD machine. Call 717-250-1348

MLS Number 12946454 2015 JCB 930 Forklift 1696 hours 6000 pounds capacity 12,990 chassis weight 48" forks Max fork height 336" Quad upright Diesel Pneumatic tires 85% Sideshifter 4 hydraulic functions

Unused 72 inch JCT Skid Steer brush mower attachment. (Low Flow)

Unused 72 Inch JCT Skid Steer Rototiller Attachment. (Low Flow)

Jeffrey Hammer Mill 30WB S/N 14168

Jeffery Hammer Mill with infeed conveyor and extra hammers. 125hp motor

Jeffrey 34WB Hammermill Hammer Hog S/N 11979, Top opening is 21" x 33", Bottom discharge, No drive, Includes 35" x 55" x 60" tall Hopper

Jeffrey 36x36 HOG s/n 11136

Jeffery Hammermill 34x24 w/125hp motor

Jeffrey Rader 1500 HP Wood Hog Model 610 WLE Endurahog

Jeffrey 30AB Hammer Mill with GE 50hp Motor, Top Infeed, Bottom Discharge

JEFFREY - 76 WBH, ...Wood Hog -- Wood Hog with: Fixed, 3-lobe, 6-way hammers. -- It has a top infeed powered chain with air cylinders that feed a 30" x 56" opening. -- Features a 700 HP - 890 RPM direct drive motor and soft start. -- There is an Operator's Console with all the controls. -- Complete with: New set of hammers and a new screen.

125 HP 460 Volt 28” x 44” inlet 7” x 40” outlet hopper included as pictured

Jeffrey vibrating conveyor, 18" wide pan x 36' long, 6" tall sides, electric drive, good working condition

JENKINS - JSM, NC Controlled Shaper & MortiserNC Controlled with: (1) Shaper head with ATC (18) tools, (1) tenon head, and (1) mortising head.Machine Specifications: -- Total X-travel: 122". -- Y-Axis (useful zone-1 only): 8". -- Min. length rail: 4". -- Max. length rail (Zone 2, 3 only): 96". -- Min. width rail: 1-1/4". -- Max. width rail: 12". -- Min. stock thickness: 1/2". -- Max. stock thickness: 2-1/4". -- Max. arch height (Zone 1 only): 6".Spindles: -- (1) 10 HP - 12,000 RPM non-tilting Cope spindle. -- (1) 10 HP - 18,000 RPM non-tilting high-speed Tenon spindle. -- (1) 5 HP - 18,000 RPM non-tilting, high-speed Mortise spindle. -- Tool Changer Capacity: (18) Tools.Controls: -- Industrial PC: Base powered by NEXCOM PEAK "760VL2" all-in-one computer card, industrial-grade computer chassis, LCD color touchscreen. -- YASKAWA Model "V1000": Adjustable AC frequency drives. -- ALLEN-BRADLEY: AC Servo Plus drive model "Ultra 3000".Over all dimensions: -- 16-1/2' Length. -- 120" Width. -- Floor-to-top guarding: 55". -- Floor to tabletop: 37-1/2".

JENKINS R Dowel Milling Machine; 1/4" to 2-1/4" Dia. capacity.Specifications: -- 4-Knife adjustable cutter head. -- 15 HP main motor - 3,600 RPM. -- Top & bottom in & outfeed rollers. -- Feed speeds 60-90-100-120 FPM, both forward and reverse, 2 HP feed motor. -- Note: Machine includes a 4-knife head which is adjustable up to 1-1/2" in diameter.Note: Check out the attached literature for better illustration and details.