Woodworking Equipment For Sale

SAND-RITE DUO-DLX Spindle Sander; Horizontal spindle sander with 3/4 HP BALDOR motor. -- Optional brush heads sand irregular surfaces with out loss of shape, and the optional pneumatic drum heads (available in 2" to 8" diameters) allow the operator to regulate how firm the sanding head needs to be to conform the head to what they are sanding. -- Price does not include the stand - Add $308.00 Cast iron stand."Drums, brush heads, and sleeves are additional".Brush Head: ADD $ 175.00 2" X 8" pneumatic drum: ADD $ 140.008" X 9" pneumatic drum: ADD $ 302.00 Special note: 220 grit is the finest grit supplied for Brush Head

SANDINGMASTER SA3300-900 TRIPLE HEAD WIDE BELT SANDER3-Head, 36" max. width cap. - 1st Head: 11" Dia. rubber covered contact roll, 24 HP motor; 2nd Head: 11" Dia. rubber covered contact roll, 18 HP motor; 3rd Head: Combination head with rubber covered contact roll and finishing platen, 18 HP motor. 37" x 75" Abrasive belts with electronic tracking. -- 2-Speed conveyor feed, 23 & 46 FPM, 1.0/1.7 HP motor, 0" - 6" motorized part thickness with LED readout, a joystick lever controls raise and lower of feed bed and start and stop of conveyor belt, also includes "SP-Matic" automatic part thickness setup. -- Thin veneer sanding package with rigid table setting for solid wood dimensioning and floating table setting for veneer sanding, infeed and outfeed spring loaded holddown shoes. -- Includes: Motor load meters, electronic brakes on sanding heads, infeed safety shutoff bar and 18" infeed conveyor area. Actual model "SA-3300-900".

SANDINGMASTER - KSB-900, ...Single Head Wide Belt Sander36" Width cap.; combination sanding head.Head: Rubber covered spiral grooved contact roll & finishing platen.Specifications:15 HP Main motor.37" x 75" Abrasive belt size.Electronic tracking and air tensioning of abrasive belt.Rubber covered infeed & outfeed holddown rollers & holddown shoes.Variable feed speed 15 - 45 FPM via 1.5 HP motor.0" - 5" Manual part thickness opening.Includes: Optional floating bed for sanding fine veneers.Equipped with & Features:Extended infeed.Load meter.Disc brake on main motor.Safety stop bar.

SAVI HFK-250 Veneer Guillotine; General Specs: -- 102.4" (2,600 mm) Width cap., 4" daylight opening, hydraulically operated knife, 4 HP Leroy-Somer motor powers hydraulic unit with reservoir. -- Originally fitted with motorized parallel fence with 0.5 HP two speed gearmotor drive, push button operated, adjustable from 1" - 50" with magnified tape reader in front of machine. -- Equipped with: 2nd Cut feature with automatic reset, laser guide line light, photoelectric barrier guard for knife & hold-down beam, 2-hand operation of knife cycle. -- Note: Rear fence has been removed or modified. Shaft has chain/sprocket.

SAWSTOP ICS 53230-52 10" TABLE SAWSpecifications: -- 10" Blade cap., 5 HP motor, 3-1/8" depth of cut @ 0°, 2-1/4" depth of cut @ 45°, 13/16" max. dado width, 5/8" arbor diameter; blade tilt left. Features: -- Enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and SAWSTOPS's revolutionary flesh detecting safety mechanism.Includes: -- 52" T-Glide Rip Fence, side support table; 4" dust collection port; miter guide. -- Magnetic contactor motor control, main power switch with removable lock-out key.

SAWSTOP - ICS 53230-52, ...10" Table SawSpecifications: -- 10" Blade cap.; 5 HP motor; 3-1/8" depth of cut @ 0°; 2-1/4" depth of cut @ 45°; 13/16" max. dado width; 5/8" arbor diameter. Features: -- Enclosed cabinet; Heavy-Duty belt drive; cast iron trunnions; SAWSTOPS's revolutionary flesh detecting safety mechanism.Includes: -- 52" T-Glide Rip Fence; sliding crosscut table; side support table; 4" dust collection port. -- Magnetic contactor motor control; main power switch with removable lock-out key.

SAWSTOP - 10", ...Table SawSpecifications: -- 10" Blade cap.; 3 HP motor; 3-1/8" depth of cut @ 0°; 2-1/4" depth of cut @ 45°; 13/16" max. dado width; 5/8" arbor diameter. Features: -- Enclosed cabinet, Heavy-Duty belt drive; cast iron trunnions; SAWSTOPS's revolutionary flesh detecting safety mechanism. -- Includes: -- 50" Rip fence; side support table and laminated top; 4" dust collection port. -- Magnetic contactor motor control; main power switch with removable lock-out key. Actual model #: ICS 31230

SAWSTOP - ICS 73230, ....Table Saw w/Safety "Stop Feature"Specifications: -- 10" Blade cap.; 7-1/2 HP motor; 3-1/8" depth of cut @ 0°; 2-1/4" depth of cut @ 45°; 13/16" max. dado width; 5/8" arbor dia. -- Features: -- Enclosed cabinet; Heavy-Duty belt drive; cast iron trunnions; SAWSTOPS's revolutionary flesh detecting safety mechanism. -- Includes: -- 52" "T-Glide" rip fence system; side support table and laminated top; 4" dust collection port; magnetic contractor motor control; main power switch with removable lock-out key. Actual model is: "ICS 73230"

SCHEER Veneer Panel Saw. -- General data: 122" Cutting length, 1-1/2" depth of cut, 3/4" - 42" max. back fence cap. with extension fingers, 5 HP arbor motor; saw carriage travels on hardened & ground ways. -- Equipped with: Manual operated saw carriage with hand crank Full-width rear fence with support, hand wheel operated rear fence with scale & arrow readout for positioning. -- Lockable fence at cutting position, fence line also pivots up to permit end trimming against the left guide fence. - Pneumatically controlled hold-down pressure beam. -- Complete with: Push button control and dust collection chute with channel in table base.

SCHELLING FH4-330/310 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 130" (3,330 mm) Rip Cutting cap. & 130" (3,300 mm) pull back; 4.1" (105 mm) saw blade projection; 3.5" (90 mm) Max book height; 24 HP (18 kW) - 3.800 RPM main motor, 3 HP (2.2 kW) - 5,500 RPM scoring motor. -- Saw Carriage: Variable saw carriage travel speed from 16 - 525 FPM (5 - 160 MPM), constant return of 525 FPM (160 MPM). -- Pusher Fence: Programmable overhead program fence, rack & pinion driven on both sides; forward speed from 0 - 262 FPM (0 - 80 MPM), constant return speed of 262 FPM (80 MPM).Pusher fence with (8) material gripper clamps with double clamping fingers, clamps open to 3.5" (90 mm).Operator & Machine Control:PC Front-end controller with SCHELLING "MCS" Evolution + "HPO" Optimizing System + "Windows XP" operating system.17" Color screen displays cutting dimensions & patterns with "REAL TIME" moving graphics, self-diagnostic, data input by keyboard or direct downloading from office PC. -- Complete with:90.5" (2,300 mm) Long crosscut fence (front-to-back), (2) side/crosscut aligners, (1) in front & (1) back of the cut-line, up to 87" (2,210 mm) cross-cutting cap.Electronic scorer adjustment, from the machine control, (3) Front-mounted air float tables with (1) central fan, 24" x 83" (600 x 2,100 mm) each, of which (2) are movable.Fully enclosed for safety with a man-height wire screen fence with access doors. -- Includes:Original Docs, Manuals, tools & tooling as pictured. -- Actual Model is SCHELLING FH4 330/310

SCHELLING - FXH 430, ...Automatic Front Load Panel SawSpecifications: -- 169" Cutting length, 3" cutting height; 3.7" (95 mm) max. saw blade projection, 20 HP (15 kW) main & 3.5 HP (2.6 kW) scoring motor. -- Variable saw carriage travel speed from 0 - 394 FPM (0 -120 MPM) via brushless AC Servo Drive; constant return of 394 FPM (120 MPM). -- Equipped with: -- Electronically controlled overhead program fence, rack & pinion driven on both sides; forward speed from 0 - 262 FPM (0 - 80 MPM) via brushless AC Servo Drive, return speed of 262 FPM (80 MPM); (8) material gripper clamps (open up to 3.5"/ 90 mm). -- Flat guideways on the feeder and saw carriage that have a "Lifetime Guarantee". -- Features: -- SIEMENS "Fijitsu" IBM-compatible PC with INTEL Celeron 1.2 GHz processor, 30 GB hard drive, 256 MB RAM, floppy drive, CD ROM drive, modem, network card, (2) USB ports, and open expansion slots (all components non-proprietary). -- SIEMENS "Fijitsu" 17-inch monitor; Windows NT based "MCS" saw control software; data input by keyboard or direct downloading from office PC is possible; optimization of programs at Saw. -- Complete with: -- 90-1/2" (2,300 mm) Long crosscut fence (front-to-back); (2) automatic side/crosscut aligners for up to 87" (2,209 mm) crosscuts; (1) aligner in front & (1) aligner behind pressure beam; (3) front mounted air floatation tables, 24" x 82" (609 x 2,083 mm); (2) tables in rip section are movable. -- Includes: -- Roller support rails rear of machine; rear of machine fully enclosed for safety with man height wire screen fencing.

SCHELLING FM-H 330/330 Automatic Panel Saw 129.9" (3,200 mm) Cutting length, 3.3" (85 mm) max. saw blade projection.Specifications & Features: -- 11 kW (15 HP) main & 1.6 kW (2 HP) scoring motor. -- Variable saw carriage travel speed from 0 - 262 FPM (80 MPM), constant return of 262 FPM (80 MPM). -- Electronically controlled overhead program fence with grippers, rack & pinion driven on both sides, forward speed from 0 - 262 FPM (80 MPM), return speed of 262 FPM (80 MPM); (6) Clamps open up to 3.9" (100 mm). -- 1,500 mm Long crosscut fence (front-to-back), (2) side/crosscut aligners for up to 87" crosscuts, (1) in front & (1) behind pressure beam. -- SCHELLING "COMPOSER" operating system; on-board SCHELLING optimizer, color monitor (displays cutting dimensions & patterns w/moving graphics), self-diagnostic, data input by keyboard & mouse or direct downloading from office PC is possible. Complete with: -- (3) Front mounted air float tables for moving panel from rip position to crosscut position; fully enclosed for safety with man-height sheet metal panels & wire screen windows.Specifications subject to verification.

SCHELLING FM-430/410 CNC Front Load Panel SawSpecifications & Features: 169" (4292 mm) Cutting length & 165.3" (4,200 mm) pull back, 3.75" (95 mm) max. saw blade projection; 25 HP (19 kW) 4,100 RPM main & 3.4 HP (2.5 kW) 5,600 RPM scoring motor. -- Equipped with: Variable saw carriage travel speed from 0 - 278.8 FPM (85 MPM), constant return of 278 FPM (85 MPM). -- Electronically controlled overhead program fence with rack & pinion driven on both sides; forward speed from 0 - 278 FPM (85 MPM), return speed of 278.8 FPM (85 MPM); equipped with (8) gripper clamps (open up to 5" (130 mm). -- Features: SCHELLING "COMPOSER" IBM-AT Compatible Computer Control; aftermarket color monitor (displays cutting dimensions and patterns w/moving graphics) , self-diagnostic, data input by keyboard; onboard optimization program. -- Complete with: 2-3/4" to 87" (2,200 mm) Long side/cross-cut aligning zone, (1) aligner in front & (1) behind the cut line. -- (3) Front mounted air float tables for moving panel from rip section to the cross-cut section, (2) movable and (1) fixed; each with their own blower. -- Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows. T

SCHELLING FXH 430/410 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:169" (4,300 mm) Cutting length & 167" (4,250 mm) pull back; 3.9" (99 mm) max. saw blade projection, 23 HP (17 kW) main & 3.5 HP ((2.6 kW) scoring motor. -- Saw Carriage: Electronically controlled saw carriage with rack & pinion drive; variable travel speed 1 - 394 FPM (1 - 120 MPM), constant return of 394 FPM (120 MPM). -- Pusher Fence: Electronically controlled overhead pusher fence, rack & pinion driven on both sides; (9) Gripper clamps that open up to 3.5" (90 mm). -- Forward speed 0 - 262 FPM (0 - 80 MPM), return speed 262 (80 MPM) FPM; travel via brushless AC Servo Drive -- Operator & Machine Control:PC Front-end with Schelling "MCS" + Windows "NT" operating system.17" Color display with SVGA resolution (displays cutting dimensions & patterns w/moving graphics); virtually unlimited storage capacity, standard keyboard & mouse.Ethernet card; 128 MB Ram, 56K modem. Integrated graphical self-diagnostic, remote diagnostics by the factory is possible via dedicated phone line; data input by keyboard or possible direct downloading from office PC.SCHELLING "MCS" software displays simulation of patterns before actual cutting; graphical representations of cut-to-size parts in production shows the operator what to do in "real time". -- Complete with:2,300 mm Long crosscut fence (front-to-back), (2) automatic side/crosscut aligners for up to 87" (2,210 mm) crosscuts, (1) in front & (1) behind pressure beam cut line.(3) Front mounted air floatation tables, each table 24" x 83" (609 x 2,108 mm), rear of machine fully enclosed for safety with man-height safety fencing. -- Actual Model is SCHELLING FXH 430/410

SCHELLING FMH 430 Front Load Panel Saw169.2" (4,300 mm) Cutting length, 161" (4,100 mm) pull-back, 3.3" (85 mm) max. saw blade projection, 25 HP (19 kW) main saw motor & 2.5 HP (2 kW) scoring motor. -- Variable saw carriage travel speed from 0 - 262 FPM (80 MPM), return speed of 262 FPM (80 MPM), LED ammeter to show load of main saw motor during operation. -- Electronically controlled overhead program fence, rack & pinion driven on both sides, forward speed from 0 - 262 FPM (80 MPM), return speed of 262 FPM (80 MPM); (9) material gripper clamps open up to 3.1" (80 mm). -- SCHELLING "COMPOSER" Electronic control with color monitor (displays cutting dimensions and patterns w/moving graphics), self-diagnostic, data input by keyboard or possible direct downloading from office PC. -- 90-1/2" (2,300 mm) Long crosscut fence (front-to-back); (2) side/crosscut aligners for up to 87" (2,210 mm) crosscuts; split pressure beam, (1) in front & (1) behind. -- (3) Front mounted air float tables for moving panel from rip position to cross-cut position, 24" x 78" (610 x 1,981 mm) each, (2) in the crosscut section are movable. -- Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows. -- Main saw blade is 370mm, Scoring blades are 200mm. Actual model is FM 430 MCS-F.This machine came equipped with the following optional upgrades: -- Formatting stops (for cutting panels with plastic laminate hanging over the edge), Real time label printing (industrial printer included), Symmetrical Cutting, Window Cutting, Postform Scorer (edge scoring saw that aligns with the main saw blade to reduce chipping at the exit side of the main blade travel), Large miter gauge that mounts to the saw to facilitate making mitered cuts, & Laser light that shows the cutline for freehand manual cutting.

--In Auction--Starting bid: $100-- Schuetz Tool Bladder Press Specifications: (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump. SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Schuetz Tool Bladder Press Specifications: (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump. SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SCMI OLIMPIC S1000 T-ERL EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) -- Specifications:Edge Capacity, 0.4 to 15 mm (0.016 to 5/8") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2.0" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With:&#9679 Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 5.25 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning and Diamond Cutter-heads. -- Anti-Adhesive Spraying System: Top/Bottom, positioned prior to the Pre-Milling Unit, it prevents glue buildup on the work-piece surfaces. It consists of (2) independent spray nozzles, and a tank for anti-adhesive liquids. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station, Vc/1000: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations:&#9679 End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0ø - 15ø, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit, Rsp: Top/Bottom, 2 x 1.5 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit, Ri/S: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit, Round-K: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. Comes with (2) pre-set pneumatic positions to allow to go from thick to thin pvc automatically. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "Rca/2c": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12°. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Controls: -- Startouch Controller, 12" color touch screen, swivels 270° at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 40/60 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all

Sandya 10 RRCS 130 wide belt sander 3-Head, 53" width cap, Drum, Drum, Combination HeadHead configuration1st Head: Contact roll, 7" dia., 35 HP motor;2nd Head: Rubber covered contact roll, 7" dia3rd Head: Combination head, rubber covered contact roll, 7" dia. and 2" wide finishing platen, 30 HP motor driving both headsSpecification -- 52" x 103" Abrasive belts -- Air eye tracking and pneumatic belt tensioning, --All heads with abrasive belt grit thickness adjustment, -- Conveyor belt feed with dual feed speed,Equipped with & Features -- Automatic part thickness adjustment. -- Motorized thickness opening via (4) precision conveyor bed jacks -- LED readout, -- 0" - 6-1/4" opening, --Infeed and outfeed spring loaded holddown shoes. -- Motor load meters; -- Infeed and outfeed conveyor roller extensions.

DMC - 1350 RKP, ...TECHNOSAND 3-Head Wide Belt Sander.(3) Heads, 52" width cap. - Head sequence: Contact sanding roll and (2) Segmented platens Head Configuration:1st Head : 35 HP 9″ Spiral Drum2nd Head : 24 HP/30 HP dual RPM 7″ Spiral Drum/Combination Head W/Segmented Platen,3rd Head : 15 HP VFD driven multi-speed head with a Segmented Platen4th Station: Panel cleaning brush Specifications: -- 53" x 103" Long abrasive belts with electronic tracking on all wide belt heads. -- Turbo panel blowers, timed abrasive belt air cleaners. -- DMC "Hydra 35" control, "EPICS" control for sectional platens. -- (99) Programs; graphic screen for machine configuration, +/- control on segmented platens, abrasive belt cleaners. -- Sequential automatic start-up, machine troubleshooting and self-diagnosis. -- Variable feed speed from 15 - 60 FPM (4.5 - 18 MPM), 5 HP variable feed drive. -- Vacuum conveyor bed with 12 HP suction fan and motor.Equipped with & Features: -- Automatic conveyor belt tracking, infeed & outfeed holddown pinch rolls or shoes on all heads. -- 0" - 4" Motorized programmable thickness adjustment with LED readout. -- Automatic part thickness adjustment, infeed hand safety stop, outfeed emergency stop. -- Motor load meters and control console with monitor & keypad.NOTE: Sander has very low hours, less than 700. The "orange" screen is the OLD screen while the "blue" screen is the NEW screen that was replaced after the original video was made. Includes (4) spare platens.