Equipment For Sale

SCMI OLIMPIC K230R EVO EDGEBANDER (W/PRE-MILLING): -- Specifications:0.4mm to 3mm Edge thickness, Panel thickness 8mm to 50mm (0.3" to 1.96"), minimum part width 60mm (2.36"), minimum part length 160mm (6.30").Minimum distance between panels: 559 mm (22";), 29.5 FPM (98 MPM) Fixed feed speed, 1.0 HP (0.75 kW) feed drive.Pre-milling station: (2) 2.0 HP (1.5 kW) motors, to rectify/clean panels already sized. -- Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning.Equipped with: 1.5 Kg Teflon-coated glue pot, glue roller application system complete w/automatic recycling device for unused glue.Digital thermostat adjustment for temperature control. pneumatic guillotine, heating time approx. 8-10 min.3-Roll pressure unit w/pneumatic controls for all pressure rollers. -- Automatic strip & coil feed magazineWorkstations:2-Motor front & rear End Trimming (0.5 HP - 12,000 RPM ea. motor.), tilts 0° - 15°, end trimmers mounted on THK guide. -- Top & bottom flush & bevel trims with quick release mount and plug-in motors for quick tooling changes(0.5 HP - 12.000 RPM motor ea.), bevels 0° - 15° with precision digital indicators for quick setup. -- Top & bottom scraping unit w/manual positioning. -- Top & bottom buffing unit (0.25 HP - 3,000 RPM motors), tilts up to 12°. Operator & Machine Control:Orion 1 Plus controller, located at the infeed of the machine. It is capable of operating all the work units via soft touch buttons.It pneumatically tilt’s the end trim unit from the control panel, it eliminates the use of micro switches, as well as control the temperature of the glue.The control is tilted slightly upward for a more ergonomically friendly position for the operator. -- Actual Model is SCM OLIMPIC K230R EVO.

SCMI OLIMPIC K 800 T-FR2 EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 65 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0ø - 15ø, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12°. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270° at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2

SCMI OLIMPIC K230TE EVO EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications:0.4mm to 3mm Edge thickness, Panel thickness 8mm to 60mm (0.3" to 2.36"), minimum part width 60mm (2.36"), minimum part length 140 mm (5.5").Minimum distance between panels: 559 mm (22";), 29.5 FPM (98 MPM) Fixed feed speed, 1.0 HP (0.75 kW) feed drive.Pre-milling station: (2) 2.0 HP (1.5 kW) - 9,000 RPM motors, to rectify/clean panels already sized. -- Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning.Equipped with: 1.5 Kg Teflon-coated glue pot, glue roller application system complete w/automatic recycling device for unused glue.Digital thermostat adjustment for temperature control. pneumatic guillotine, heating time approx. 8-10 min.3-Roll pressure unit w/pneumatic controls for all pressure rollers. -- Automatic strip & coil feed magazineWorkstations:2-Motor End Trimming (0.25 HP - 12,000 RPM ea. motor), tilts 0° - 15°, end trimmers mounted on THK guides. -- Top & bottom flush & bevel trims with quick release mount and plug-in motors for quick tooling changes. (0.5 HP - 12.000 RPM motor ea.), bevels 0° - 15° with precision digital indicators for quick manual setup. -- Corner Rounding unit for the leading & trailing edges.(1) 0.25 HP - 12,000 RPM motor. -- Top & bottom Profile Scraping unit w/manual positioning via digital read-outs. Top & bottom flat/glue Scraping unit w/manual positioning via digital read-outs. -- Top & bottom buffing unit with up to 12° tilt; (0.25 HP - 3,000 RPM motors). Operator & Machine Control:Orion 1 Plus controller, located at the infeed of the machine. It is capable of operating all the work units via soft touch buttons.It pneumatically tilt’s the end trim unit from the control panel, it eliminates the use of micro switches, as well as control the temperature of the glue.The control is tilted slightly upward for a more ergonomically friendly position for the operator. -- Actual Model is SCM OLIMPIC K230TE EVO.

Working Areas: X-Y Axes Dimensions (Depending on Machine Configuration) (Mm): 5510×1320 Axes: Vectorial Speed X-y Axes M/min: 56 (Prospace), 78 (Prospeed) Z Axis Panel Passage mm: 180 Routing Unit: Motor Power (Max.) Kw (Hp): 15 (20,5) Rotation Speed (Max.) Rpm: 24000 Available Tools on Tool Changer (Max.) Places: 24 Spindle: HSK63 Machine has a drill block that was never used. Still under power but ready to move.

SCMI K203 Edgebander Well maintained machine that is ready to ship!

SCMI K360 Edgebander

SCMI Olimpic K 208 F

SCMI K230 Edgebander Manufacturer specs (to be confirmed): · Edgebanding thickness: .4mm - 3mm (.016-1/8”) · Guillotine capacity: 3.0mm · Feed speed: 30 ft/min. · Panel height: 3/8” min – 1 15/16” max · Minimum panel length: 5 1/2” · Minimum panel width: 2 3/8” · Minimum distance between panels: 22”

SCMI Pratix CNC Router 5x12 Table Scissor Lift Outfeed Table (2) 10 HP Vacuum Pumps Transformer Ready to load!

Table: 14’x5' X-axis: 120? Y-axis: 51? Z-axis: 12? RPM: 6,000 Dimensions: 255?x118?x106? Weight: 14770 Equipped with: Dust Collector Tool changer: 12

Working Areas: X-Y Axes Dimensions (Depending on Machine Configuration) (Mm): 5510×1320 Axes: Vectorial Speed X-y Axes M/min: 56 (Prospace), 78 (Prospeed) Z Axis Panel Passage mm: 180 Routing Unit: Motor Power (Max.) Kw (Hp): 15 (20,5) Rotation Speed (Max.) Rpm: 24000 Available Tools on Tool Changer (Max.) Places: 24 Spindle: HSK63 Machine has a drill block that was never used. Still under power but ready to move.

SCMI Olimpic S215 Edgebander

Customer has two SCMI M3 rip saws for sale. One is fully functional and is a parts machine. It functions but the head will not move up.

SCMI M3 Gang Rip Saw Includes: Misc blades

35 spindles (vertical/horizontal) 32mn spacing left/right fences quick release chucks 2800 rpm spindle speed 5 HP 3 Phase

SCMI Gang Rip Saw S/N B.540480

SCMI K230 Edgebander Manufacturer specs (to be confirmed): · Edgebanding thickness: .4mm - 3mm (.016-1/8”) · Guillotine capacity: 3.0mm · Feed speed: 30 ft/min. · Panel height: 3/8” min – 1 15/16” max · Minimum panel length: 5 1/2” · Minimum panel width: 2 3/8” · Minimum distance between panels: 22”

Working height 120 mm working width 240 mm feed speed 6-36 fpm 6’6” straightening infeed

SCMI S630 Planer Capacity 24” x approx. 10” Straight 4-knife cutterhead Sectional chipbreaker and sectional infeed roller Cutterhead motor: 12HP, 230v (currently wired)/460v, 3PH 39” long bed with (2) idler rollers 2 rubber coated outfeed rollers with air assist Motorized raise/lower Includes manuals Solid machine. Currently replacing all bearing and thoroughly cleaning down to the bolts. Operating Instructions, Parts manual, wiring diagram included. Extra set of knives included. Weighs 2000lbs+

SCM F520 Nova Jointer with Tersa cutter heads 20" Machine