Equipment For Sale

TIMESAVERS 2331-04-334 DUAL HEAD DENIBBING SANDER2-Head, 42" width capacity Sanding / Denibbing system. -- (2) 5" Wide platens featuring a "dual" action head with a high speed orbital movement and combined back & forth oscillation to remove abrasive belt crossgrain scratches; platens designed with a quick change system for abrasive material. -- (1) Nylon abrasive impregnated (150 grit) Cleaning / De-Nibbing brush, 10" dia., drive unit for brush rotation, brush wear adjustment via jack screws. -- Vacuum holddown conveyor system with variable feed speed 5 - 15 FPM. -- Double infeed and outfeed holddown pinch rollers. -- Power raisng and lowering of the conveyor bed with AUTO-SET feature, 0" to 6" part thickness capacity. (4) DUFF-NORTON acme screw jacks under conveyor bed, 36" infeed conveyor area.

Timesavers 2311-24-6 Pro V.42″ Segmented Platen, Wide Belt Sander42″ Segmented Platen, Specifications: -- 3,273 hours. So it is not a high hour machine. -- 42″ width X 4.75″ (120 mm) thickness capacity. -- Controlled via an easy to use touchscreen. -- Stores up to 240 Programs. --Font drum is a 5″ helically grooved rubber drum that is pneumatically actuated from the control panel. -- The head has variable speeds from 275-1,150 RPM. -- The platen is segmented and there is NEW graphite on the platen.Equipped with & Features -- Both the platen and head have dial indicators for fast, easy, accurate control over adjustments. -- Rear of the machine you will find dust sweeps. -- Up top you will also find a pneumatic air wand for abrasive cleaning. -- Cleaning brush. -- On the front center of the machine you will find an auto calibrating unit. -- The vacuum bed has a 15 hp blower with an almost NEW feed mat. -- The feed mat is driven by a 2 hp motor that is VFD controlled allowing for 12-45 FPM.

TiMESAVERS - 237-KA IC, ...Planer Sander w/2-HEADs 2-Head Planer Sander Combination; 37" width capacity.Head Configuration: -- 1st Head. 7" Dia. Helical "Quiet Cut" planer head with: (6) Spirals of 4-sided carbide inserts with 15° rake angle; head turns @ 3,200 RPM; head adjustment with dial indicator readout; 30 HP motor. -- 2nd Head. Combination Sanding head with: 6" Dia. contact roll (60 - 65 Duro) and 2-1/2" wide finishing platen; 25 HP motor; sanding head with: 37" x 75" abrasive belt with "POSI-TRAK" electronic tracking.Feed System: -- Variable feed speed 15 - 45 FPM; automatic conveyor belt tracking; 3-ply rough top conveyor belt. -- Anti-kickback fingers on infeed; air loaded sectional shoe with dial indicator adjustment; double grooved pinch roll on infeed of knife head. -- Infeed & outfeed pinch rolls on sanding head; air activated caliper disc brakes on all heads. -- Motorized part thickness adjustment of 0" - 6" with digital readout.Complete with: -- Controls mounted on belt loading side; main motor fuse protection on both heads; load meters for each head; "over thick" shutoff system; 24" infeed conveyor extension.

TIMESAVERS 252-4-IC, ... Wide Belt Sander, 4-Head.4-Head, 51" cap. - Great sander for solid wood and veneer panels equipped with (2) Contact rolls and (2) Air platens. Head Configuration1st Head: Rubber covered contact roll, 9-1/2" dia. 60 - 70 Durometer, 40 HP motor.2nd Head: Rubber covered contact roll, 9-1/2" dia. 50-60 Durometer, 30 HP Motor.3rd and 4th Head: Finishing platens, 2-1/2" wide "Veneer Saver" inflateable platens with adjustable timers for leading and trailing edges, 20 HP motor each head.Specifications: -- 38" Constant pass line height of Vacuum conveyor with suction fan and motor bed assembly for veneer and solid wood sanding. -- Adjustable air floating infeed and outfeed hold down shoes. -- 52" x 103" abrasive belts with "POSI-TRAK" electronic tracking.Equipped with & Features: -- Motorized part thickness adjustment with mechanical digital readout. -- Auto part thickness set-up, 0" - 6" opening. -- Hydraulic feed belt operation of 15 - 45 FPM via 7-1/2 HP hydraulic pack. -- 4-Motor load meters, controls mounted on belt loading side. -- Disc brakes on sanding head motors. -- 30" Infeed load area.

Timesavers 2321-45-01 (2) Head wide Belt Sander51" Width cap, Drum, Combination HeadHead Configuration1st Head: Steel contact roll, 8" dia., 30 HP motor.2nd Head: Combination head with a rubber-covered contact roll 5-1/2" dia. and 2-1/2" wide segmented finishing platen, 25 HP motor, (2) dial indicators for contact roll height adjustment.Specifications: 52" x 103" Abrasive belts, -- "Posi-Trak" electronic tracking & pneumatic tensioning, conveyor belt feed. -- 15 - 45 FPM Variable feed speed with inverter control, -- Automatic conveyor belt tracking; -- Double in-feed & out-feed spring loaded hold-down rolls.Equipped with & Features -- 0" - 5" Max. motorized part thickness opening with automatic part thickness set-up, -- Air-operated disc brakes, -- Motor load meters, -- 14" in-feed conveyor area, -- In-feed emergency stop bar."Owner's manual included

Only 697 hours, taken from service (2) top heads - one orbit, one brush (1) 3HP main orbit motor (1) 3HP feed motor (1) 1HP brush motor (1) 1HP oscillation motor 460V Max. stock width 36" Max. thickness 6" 32-38" variable passline height 2,000 CFM @ 5,000 FPM exhaust air requirements

TimeSaver Mdl 325-2 36" Wide Belt Sander S/N 7887

Timesaver Mdl 337-6 36" Belt Sander S/N 18395

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

Single Head Top and Bottom Sander

TIMESAVER 337-2 Wide Belt Sander, (2) Heads36" Width cap., Drum, Combination HeadHead Configurations:1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 40 HP motor.2nd Head: Combination Head, Drum with Platen 30 HP motor. Specifications -- 37" x 75" Abrasive belts with pneumatic tracking. -- 2 HP feed drive; Variable feed speed from 20 - 60 FPM.Equipped with & Features -- Infeed & outfeed spring loaded holddown rolls on both heads. -- Motorized thickness adjustment with indicator, -- 0" - 6" opening. -- Infeed safety stop -- Adjustable shoes before and after each head. -- Controls mounted on belt loading side, --Sanding head motors with air caliper disc brakes, and motor load meters.

Timesavers Model 2331-04-334 3-Head Orbital Sander 43" Machine

TIMESAVERS 150-1v Wide Belt Sander;1-Head, 50" width cap.; contact roll head with 40 HP motor; 50" x 103" abrasive belt size, air tracking, 2-1/2" max. thickness cap., adjusted by scale; variable feed speed 40 to 100 FPM; incl. in- & outfeed extension. -- Used to have a checkrail edge sanding attachment for sanding sash (no longer available), but includes (1) extra set of new conveyor belts.

TIMESAVER - TB-440-4, ...2-Head Wide Belt Sander40" Width cap.; Drum and Combination Head.Head Configuration:1st Head - 50 HP; 12" rubber covered contact head.2nd Head - 40 HP; combination platen head.Specifications: -- Sander completely rebuilt (15) years ago. -- Rubber covered abrasive rolls were recovered, grooved and balanced, along with ALL pinch rolls recovered at FLETCHER MACHINE CO., Lexington, NC. -- Electric eyes upgraded to BANNER's send and receive type; includes battery backup system for controls (no crashes when machine has power outage). -- Feed speed gear box driven by AC Drive controlled 10 HP motor. -- Rebuild included: Table removed and platens ground flat; all bearings replaced, including pinch rolls and tracking cylinders; tension cylinders plasma sprayed, reground & new factory seal kits. -- Entire machine was disassembled, sand blasted and DUPONT "Zolatone" primed and painted. -- RAINBOW brand feed conveyor belt replaced in 2014. -- Many more upgrades, too many to list: Please contact for additional information. -- Machine is in good condition, running daily, and has had regular recommended service intervals; includes all factory manuals, blueprint drawings, parts list with numbers supplied, and when machine was new. -- Machine used in solid wood wide belt sanding. -- Includes Cloth aluminum Oxide Belts: 7 - 50 grit; 1 - 60 grit; 8 - 80 grit; 2- 120 grit; 8 -1 80 grit..

TIMESAVER 237-3 IC Wide Belt Sander: 3-Head, 36" cap. - Drum, Drum, Finishing Platen. -- 1st Head: Rubber covered contact roll, 11-1/2" dia., 50 HP motor; -- 2nd Head: Finishing platen 2-1/2" 30 HP motor. -- 3rd Head: Finishing platen 2-1/2" wide, 30 HP motor. Specifications: -- 37" x 75" Abrasive belts. -- "POSI-TRAK" electronic sanding belt tracking. -- Motorized part thickness adjustment. -- 0" - 6" Opening, automatic part thickness adjustment. -- Infeed & outfeed spring loaded holddown shoes. -- Variable feed speed from 15 - 45 FPM, 5 HP feed motor.Additional Features: -- Motor load meters. -- Infeed emergency stop bar. -- Controls mounted on belt loading side. , -- Disc brakes on sanding head motors. -- 30" Infeed load area.Actual model: TIMESAVERS "237-3IC"

TIMESAVER 2331-24-001 Wide Belt Sander, (3) Heads: 43" Width cap. Drum, Drum, Combination Head.Head Configuration.1st Head: Spiral Rubber covered contact roll, 65 to 70 duro 8" dia., 25 HP motor.2nd Head: Spiral Rubber covered contact roll, 65 to 70 duro 8" dia., 20 HP motor.3rd Head: Combination head with 5-1/2" dia. 65 to 70 duro spiral grooved rubber contact roll and 2-1/2" platen - 15 HPSpecifications: -- 43" x 75" Abrasive belts. -- "Posi-Trak" electronic tracking & pneumatic tensioning. -- Contact roll & platen height adjustments with dial indicators. -- Conveyor belt feed, 20 - 45 FPM variable feed speed. -- Automatic conveyor belt tracking. -- Double infeed & outfeed spring loaded holddown rolls. -- 0" - 5" Max. motorized part thickness opening with LED readout. Equipped with & Features: -- Automatic part thickness setup. -- Air operated disc brakes. -- Motor load meters. -- 14" Infeed conveyor area, and infeed emergency stop.

TIMESAVERS 137-1 SINGLE HEAD WIDE BELT SANDERSpecifications: -- 36" Width capacity, combination sanding head with 6" dia. spiral grooved rubber contact roll. -- 1-1/2" Wide adjustable height polishing platen on slide out assembly. -- 37" x 60" Abrasive belt size.Equipped with: -- 20 HP Main motor, -- Electric eye abrasive belt tracking, and limit switch monitoring. -- 1 HP feed motor with a fixed speed of 30FPM. -- 0" - 8" manual part thickness opening of conveyor bed. -- Double infeed & outfeed rubber covered holddown rollers. Complete with: -- 18" Infeed conveyor extension, motor load meter, and safety stop bar.

TIMESAVER - 113, ...12" Width Single-Head Wide Belt Sander12" Width cap., single drum.Specifications: -- 12" Width capacity. -- 7.5 HP Main motor. -- 6" Dia. drum. -- 0 - 8" Opening capacity. -- 0.5 HP Feed motor. -- Complete with: Posi-Trac electronic tracking and a 12" conveyor extension.

TIMESAVER - 337-2, ...2-Head Wide Belt Sander36" Width cap., Drum & Combination HeadHead Configurations:1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 40 HP motor.2nd Head: Combination Head, Rubber contact Roll & Platen 30 HOSpecifications: -- 37" x 75" Abrasive belts with pneumatic tracking. -- 2 HP Feed drive; Variable feed speed from 20 - 60 FPM. -- Infeed & outfeed spring loaded holddown rolls on both heads. -- Motorized thickness adjustment with indicator, 0" - 6" opening. -- Infeed safety stop bar. - Also has adjustable shoes before and after each head. Equipped with & Features: -- Controls mounted on belt loading side. -- Sanding head motors with air caliper disc brakes --Motor load meters.

TIMESAVERS - 4321-45-01, ...2-Head 52" Wide Belt Sander.Head Configuration:1st Head: 9-1/2" Dia. rubber-covered contact roll, infeed & outfeed spring-loaded holddown shoes & pinch rolls; 40 HP Motor.2nd Head: Combination head with: 6" Dia. Rubber-covered contact roll & 2-1/2" wide Platen, infeed spring-loaded holddown shoe & outfeed double pinch rolls; 30 HP motor. 3rd Station: Panel Cleaning Brush.Specifications: -- 6" Thickness capacity. -- Variable speed feeds from 15 - 45 FPM. -- 52" x 103" Abrasive belt size.Equipped with & Features: -- Automatic part thickness adjustment with digital thickness indicator. -- Dual "POSI-TRAK" electronic abrasive belt tracking. -- Air caliper disc motor brakes and load meters. -- Infeed safety stop bar.