Equipment For Sale

Viet Opera 5-4.3 RRRR, (4) Head Wide Belt SanderCalibrating Sander (89 Hours)53″ wide cap. - Drum, Drum, Drum, DrumHead Configuration1st Head: 9″ Helical grooved steel drum powered by a 22 kW or 29.5 HP motor.2nd Head: VARIABLE SPEED (via VFD) 9″ helical grooved rubber drum powered by a 18.5 kW or 25 HP motor. 3rd Head: VARIABLE SPEED (via VFD) 11″ helical grooved rubber drum powered by a 15 kW or 20 HP motor. 4th Head: VARIABLE SPEED (via VFD) 11″ helical grooved rubber drum powered by a 15 kW or 20 HP motor.5th Station: Dust brush powered by a 1.27 kW or 1.7 HP motorSpecifications -- The durometer does get softer from head 2 to 3 and then from head 3 to 4. -- It has 53″ width capacity and a 200 mm or 7.87″ thickness capacity. -- Right above the machine's infeed, you will find inspection LED lighting, a digital thickness calibration unit, and a wireless Mitutoyo Digimatic Caliper that communicates with the Opera’s operating system. -- The vacuum bed is powered by an 11 kW or 15 HP blower under the sander to save space. -- The feed mat is powered by a 5.5 kW or 7.5 HP motor with variable speed via a VFD with feed speeds from 9.8 to 52.4 FPM.Equipped with & Features -- Inside you will find interior LED lighting while all the controls on this Opera are upfront via a touch screen -- Constant pass lineNOTE : This calibrating sander has a total of 1,982 power on hours and ONLY 89 run (conveyor) hours. This is a very loaded, LOW Viet Viet Opera 5 (4) Head 53″ Calibrating Sander

VIET - S211 R+ KRT, 2-Head Wide Belt Sander43" Width. cap.: Drum and Combination head.Head Configuration:1st Head: 160 mm 6.3″ Helical grooved rubber drum. 25 HP motor2nd Head: 160 mm(6.3") Helical grooved rubber drum with a platen combination head., 25 HP motorSpecifications: -- Each heads are powered by 25 HP motor. -- The heads can be programmed to pneumatically raise & lower along with the platen and do (3) sanding combinations (with the twist of a button). -- Digital height readout along with a calibration unit to the left side of the conveyor. -- Conveyor speed is controlled via a variable frequency drive 2.5 HP . --Max width: 43″. -- Max. height: 6-1/4". -- Variable speed conveyor belt drive from: 3 - 16 MPM (11 - 52 FPM).Equipped with & Features: -- Both heads equipped with: 1,130 x 1900 mm (44-1/2" x 75"). -- Roller & pressure shoe holddowns. -- Pneumatic tension of sanding belts and feed conveyor. -- Load meter on main motor. -- Disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back.. NOTE: This is an extremely low hour 2016 BIESSE Viet S1 dual head 43″ calibrating Wide Belt Sander.

VIET - S1 211, ...2-Head Wide Belt SanderWidth Cap. 43"; Drum and Combination Head.2-Head with: (1) Contact Roller and (1) Fine Sanding Platen; 1,100 mm (43") working width. Solid wood, veneer & lacquer Sander.Head Configuration:1st Head: Rubber covered contact roll, spirally grooved, dia. 200 mm (7.9").2nd Head: Fine sanding platen, segmented, electronically controlled.Specifications: --Both heads driven by (1) main motor 15 kW (20 HP). -- Both heads equipped with: 1,130 x 2,620 mm (44-1/2" x 103") abrasive belts. -- Roller shoe holddowns, Pneumatic tension of sanding belts and feed conveyor. Feed System: -- Vacuum conveyor system for small and lacquered parts. -- Variable speed conveyor belt drive from 3 - 16 MPM (11 - 52 FPM). -- Part thickness 3 - 160 mm (1.2" - 6.3"). -- Motorized part thickness adjustment, with digital height readout. Equipped with & Features: -- SCS Control panel with storage capacity for multiple sanding programs. -- Load meter on main motor. -- Disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back.

VIET Planer Sander Sander model S2 321 HR/KRT ( 2018 ) !st head planer with helical insert cutter knives 30 HP 460 volts 2nd head drum contact roller 3rd head combination drum rollers with finish platen Both sanding heads run by 30 HP motor 460 volts Adjustable rubber coated pressure rollers Opening capacity range 1/8” to 6” Sanding belt size 44” x 103” Feed speed 19 to 52 FPM Electronic digital readout with auto thickness positioning Disc brakes on each machining station Front and rear emergency push buttons Electro pneumatic sanding belt tracking This machine has low hours as owner only ran half days first year and less after next years

60" | RH | PMG Upgrade | 90's

2015 Viking Champion QC306 60 x 84 Pallet Nailer

Viking Tandem Nailer with TC100 Electrical Upgrade | 480v | 1500 Pallets Per Day | 4 Stringer | 6 Position Turner

2019 Viking Champion QC306 72" RH 4 Stringer Pallet System. Heavy Duty Nailing Frame, Bottom Deck Fast Mechanical Set Up, Heavy Duty Stringer Hoppers, Overhead Hyd Power Unit, Top & Bottom Deck Wings up to 5", Heavy Duty Nailing Carriage Drive System w/Directional Valve Control, 1" Compensating Nail Chucks, GE RX31 Programmable Logic Controller, GE 6" Color Touch Screen Operator Interface Unit w/40 Pallet Storage, Auto Program Mode, Circuit Breakers On All Controls, Fully Adjustable Pallet Stacker, 12' Roll Out Conveyor, Spare Parts w/Tools, Service Operators Manual, 480 Volt

2006 Champion QC306 | 84" Max Length Capacity | Great Running Condition

(2) Viking Nailers ready to ship! Viking 304A and 314

2001 | Viking Turbo 505 | Left, Left

2018 Viking Express 403 | 2 Branders | 4 Nailing Heads | 60x72 Capacity

2023 | Right, Right | Produces 2,400+ pallets/shift | 3 operator machine | 4 stringer standard | Updated Nail Delivery System | Universal pallet turner | FMS on all chucks, stringer rails and intermediate conveyor | 12” color touch screens | Turbo Pro Plus Data™ Software | Nail delivery sensors | Nail up sensors

480V | TC-100 Electrical Upgrade | Branders | Corner Rounder | Left|Left

1995 | Viking Turbo 505 | Right/Right | Includes Space Parts - List in Pictures

Viking Pallet Stacker w/Hydraulic Power Pack

2019 | 480V | 72" x 60"

2021 | 480V | 72" x 60"

Viking Splitter Sizing Line with Operator Platform

1994 | 480V | PMG LZ electrical upgrade | Turner gearbox option | Overhead nail valves option