Equipment For Sale

5 strand Mellott unscrambler, electric drive, 81X chain with lugs, 10' 6" wide x 59" tall, excellent condition

20' 3 Strand Log Deck w. Stop and Load and Hydraulics.

Mellott rollcase/transfer deck, 24" wide x 15' long, electric drive, includes 4 strand pop-up transfer deck, 5' long x 12' wide, very good condition

Mellott (3) Strand 10 x 18 Log Deck with SNL includes Nose Skids

Mellott Model 7 Log Turner Hydraulic Power Unit Included

5 strand transfer deck, 10' 6" wide x 9' 6" long, 81X chain, electric gearbox drive, has air operated board stop, excellent condition

Mellott vibrating conveyor, 24" wide pan, 8" tall sides, electric drive, chipper spout, very good condition

Mellott rosser-head debarker, your choice of power (electric or hyd), new babbit in bearings, new cleats on bull wheels, good condition and ready for production

Transfer Belt Built on Mellott rollcase frame • 31" x 12' spiral rollcase built on end • 36" x 25' x 8" sides • 22" pan, 22"

Mellott Saw Guide/Mandrell with belt.

Mellott Chain Log Turner

Mereen Johnson Model 312 Rip Saw Includes: New pads for the chain Includes: Twistlock Collar Mounted Saw Blades Available approx May 1, 2024

Mereen Johnson 424 Gang Rip Saw

Mereen-Johnson Model 441-DC Gang Rip Saw Capacity: Arbor space 41” Arbor Drive: 75 HP 3600 RPM TEFC motor Feed Drive: HP TEFC variable speed direct; 45’ to 225’ feet per minute Hold Downs & Bed Plate: Four 5” dia. Air loaded high yield idle press rolls Saw Sleeve: One 41” capacity sleeve Dust Collection: Four upper dust pick-ups: two (2) 8” dia., two(2) 4” dia., one lower 4”dia. Pick-up:(requires total 4820 CFM @ 5,000 feet per minute) Swing Arm & Tip-Up Cart: One floor mounted dual shaft swing arm and one tip-up saw sleeve set-up cart Electrical: Arranged for 3 phase, 60 cycle, 460V Cameron Automated Opti-Rip Model #34F-M1 System: Manufacture Year: (2004) Complete with length measurement Tally System 5 infeed belt and chains for feeding a Gang Rip saw up to 41” wide 16 width sensors 3 sets of pinch rolls for short stock 1 fixed & 4 movable laser lights This system feed for 4’ to 16’ max lumber length It feeds from operator right to left Wired 220V; If 440V required, a transformer will be needed

Mereen Johnson 431 DC

These two rip saws were removed from service in working condition some time ago. The seller purchased them and never installed them. They have been in storage the whole time.

MEREEN-JOHNSON 312-DC Dip Chain Gang Rip Saw, with Only 8,748 Hrs.!Specifications: -- Arbor cap. 12". -- Max. blade dia. 14". -- Max. thickness 3-1/2". -- Min. length: 30" for Glue joint accuracy & 22" for Busting. -- Throat 6". -- Feed speeds 30 - 150 FPM. Equipped with: -- 50 HP - 3,600 RPM TEFC Direct drive motor, with Disc brake, Load meter, & Arbor lockout for access door. -- "POSI-FEED" Dip bed, with 5" Pitch Hardened double-V chain, "QUAD LIFE" Hardened dip cams, 2-3/8" x 14"; Extruded structural aluminum feed bed slats with 1-3/4"; Replaceable steel-backed rubber insert strips, & Automatic chain lubrication with Low-level shutoff. -- 4 HP Feed motor, with Adjustable jam protection. -- (4) 3" Dia. Air-loaded overhead pressure rolls, Full width segmented maple, spring-loaded overhead pressure shoe, Anti-kickback fingers.Complete with: -- (6) "LAHARCO" Lasers. -- 13"; W x 8-1/2' L x 34"; H Infeed Gravity Roller Conveyor, with 3-3/4"; Rollers on 12"; Centers & 9’ L x 2"; H fence. -- Motorized Nip Roll, with (2) Sets of 4-1/2"; Dia. x 25"; L Rubber-covered rolls & 1/2 HP Motor.Dimensions with Infeed Conveyor: 200" x 75" x 110" H.

1999 Mereen-Johnson Gang Rip Saw | Model 431

MEREEN JOHNSON 312-DC-SR-1 Gang Rip Saw with (1) Moveable Blade.Specifications: -- (1) Independently adjustable select saw assembly with traveling shoe hold-down, powered horizontal adjustment at nominal 4" per second. -- 12" arbor lenght -- 1" Min. distance between adjustable saw and outboard fixed saw. -- Accepts 12" or 14" diameter face-mounted saw blades. -- Main Motor: 50 HP - 3,600 RPM direct drive motor. -- Laser rack with (2) laserCapacities: -- 12" Arbor capacity, 3" thickness capacity w/14" diameter saw blade; 22" minimum part length. -- 3 HP feed motor; 30 - 150 FPM feed rate. 12" x 2-9/16" diameter arbor with 1/2" x 1/8" double key. -- Pressure head includes (4) 3" diameter air-loaded overhead idle press rolls, and (2) spring-loaded traveling shoe hold-downs. -- 1-1/8" Minimum between cam-lock mounted saw blades using moving shoe hold-downs; anti-kickback fingers. Also Included: -- (2) Cam lock sleeve -- (3) Blades

MEREEN-JOHNSON Model 524-DDCSR 2+4 Double Arbor Gang Rip SawSPECIFICATIONS: -- First Arbor Arranged with Two (2) Independently Adjustable Select Saw Assemblies for Mounting Hogging Blades -- Second Arbor with Four (4) Independently Adjustable Select Saw Assemblies -- Arbor Space 24" -- Thickness Capacity to 1-3/4" with 12" Tooling and 2-3/4" Using 14" Tooling -- Minimum Length 30"Equipped with & Features -- Two (2) M-J Direct Drive Motors 75 HP Each -- Feed Motor 7.5 HP TEFC, 30' to 235' rate with Frequency Inverter Speed Control -- Saw Set Up for Second Party Optimizing System.