Equipment For Sale

CONNECTING LINES NOT INCLUDED 120° Rotation AMI Tilting Pin Grab Coupler Fits 324-335 CAT Excavators Hydraulic Pin Grabber PINS NOT INCLUDED PowerTilt Hydraulic Pin Grab

GRABS DB- LINKAGE WORKTOOLS. HYDRAULIC COUPLER- CB LINKAGE ON TOP AND DB LINKAGE ON BOTTOM NEW NEVER BEEN USED

336 DB LINKAGE AMI COUPLER, HYD PIN GRABBER Hydraulic Pin Grabber TILTING COUPLER

MAX NUMBER OF COUPLINGS: 5 PIN DIAMETER: 2.4IN ROTOTILT 313-315 QC60-5 COUPLER SOLD AS IS

12.150 CUBIC FOOT CAPACITY 310 LINKAGE AMI 48" TILT BUCKET BOLT ON CUTTING EDGE CONNECTING LINES INCLUDED PINS INCLUDED SOLD AS IS

2840 LB / 1.92 CY / BOLT ON CUTTING EDGE WIMMER T08 L30 72” S2 HITCH (INTERFACE)

This is a chute that came off a 2590 Bandit wood chipper we’re pretty sure. We have welded holes that were worn into it. Asking $500 for the chute. If interested in this chute call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The chute is being sold from our lumberyard, it is located in State Line, Mississippi, 39362, 467 St Peter St.

Falk Ultra-Max Gear Drive

2021 PTR MODEL: TP2500HD COMPACTOR 2.5 Cubic Yard Capacity Serial: 208646 1/2" AR Floor 10 HP Power Unit & Controls Compactor was in Service Only 10 Months

Flowline Water Filtration System Dimensions: Platform 98" x 70" Diameter 82", Platform to top of tank 89" 15hp Baldor Industrial Motor

OVERBUILT BALER/LOGGER Logger BalerThe OverBuilt baler/loggers are the fastest, most efficient baler/loggers any scrap recycler can own. Compressing scrap metal and vehicles into denser, stackable forms results in more efficient loading and transport.Specifications: -- Charge box open:20’ x 8’ 5"; -- Closed: 240"; L x 40"; W x 26"; H -- Bale Size: 40"; x 26"; x Variable -- Min. variable distance: 22"; -- Bale density: 25 - 80 lbs/ft³ -- Main compression cylinders: 2 -- Logging rorce (per side): 175 tons -- Charge box door cylinders: 6 -- Baling force (per door): 255 tons --8200 hours total on machine, 1000 hours on rebuilt engine

OVERBUILT - 10 HS Portable, ...Car CrusherSpecifications: -- (2) 10" Cylinders. -- Height: 10 ft. (raised); 24" ( lowered). -- Width: 7-1/2'. -- Length: 20-1/4". -- Lid movement: 8 ft. (Travel) -- Hydraulic cylinder: 10" x 4" Rod x 96" travel. -- Pressure: 2,400 PSI. -- Crushing force: 159 Tons -- Resealed Cylinders.

1974 P&H Mobile Crane Harness finger Highway ready 130' reach, 30' stowaway Dual winches Main Tranny and Aux tranny New clutches for both 4 new steering tires 6 speed Detroit Crane smart weigh scales All factory service manuals included Road and work ready

Pacific Saw Post Grinder

2014 Pacific Trail Extra-Cut | 480V | ±1/16” Cutting Tolerance

Single End Tenoner that will handle straight or curved material. Carves round ended tenons through the use of (2) worktables which independently slide on steel rails. Tables independently adjustable for height and tilt Max width 100mm Max thickness 30mm Max Depth 50mm Table adjustment (vertical) 100mm Tilting 20^ front 15^radial Fence 45^ Spindle motor 2.25KW (3HP) (2) dust hoods Weight 960KG Dims 1320 x 1120 x 1250 mm 230 volt 3phase

A Paladin Sweepster in good shape work ready for your tractor. If interested in this call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493 The sweepster is being sold from Ala-Miss Inc. located in State Line, Mississippi, 467 St Peter S

Sullivan Palatek 100HP Air Compressor 230 Volt 3 Phase

(2) Sullivan Palatek 25D4 Air Compressors 25HP Screw

2021 | 110V | Up to 6 Stringer | Guns not included | 60"x 84"