Equipment For Sale

Patz 28" x 18' Approx. Belt Conveyor

Patz 12" x 134' Barnsweep Bark Conveyor with 35' Double Sided Steel Chute and Electric Drive.

Patz 12"x36' Barnsweep Conveyor w/ 35' Double-sided Steel Chute w/ Electric drive (clockwise)

33' PATZ CONVEYOR

Paul AB920 Rip Saw Scanning Fenceless Infeed Infeed & Outfeed (not including decks) The machine has one fixed and 2 moving blades. The minimum distance between the moving blades is 44 mm (1.73"). The maximum distance between the moving saw blades is 210 mm (8-1/4"). The machine is designed for incoming boards with the following min./max. dimensions Length: 4' - 16' Width: 2" - 19" Ripped widths: 1.75" - 8" Thickness: 1" - 2" 480 Volt, 60 hz., 3 phase electrics 75 HP main motor Automatic edging separation after the saw Feed speed up to 300 fpm Fenceless infeed system with automatic skewing capability 16 width sensors on the infeed system

This is an in-line electrical monitor for proportional hydraulic valves with on-board electronics. Designed to monitor those voltages which can affect the control of proportional hydraulic valves in a hydraulic system. Please call for more information. TESTIMONIAL:I am the Operations Manager at GPM Hydraulic Consulting and we have been using the Model PVT-02 proportional valve tester to troubleshoot proportional valves for our customers for many years now. We have purchased test boxes for all of our Consultants to use in the field when troubleshooting. This test box has saved us hours of troubleshooting and in return saved our customers hours of downtime. The box is connected in a series so you can observe the supply voltage, command signal and LVDT (linear variable differential transformer) feedback from the proportional valve while the system is running normally. You can also use the box instead of the PLC to drive the valve to see if the problem is the controller or valve itself. If you have proportional valves, you need to get one of these test boxes. Without the box to troubleshoot, your valves may get changed when there is nothing wrong with them. This box is also very affordable, a lot cheaper than what a proportional valve costs. Last year I went on a consult for a company that made floor panels for BMW. A proportional valve is what controlled the press opening and closing but the press would not move. I connected the test box to their valve in series to watch the power supply, command and feed back voltages. When a command was given to lower the press, a power supply voltage of 22.6 volts was supplied to drive the valve amplifier. Normally the voltage should be 24 volts however, 22.6 was within the acceptable limits of operating the amplifier. The command voltage applied was 3.5 volts. The LVDT feedback voltage should have been 3.5 however, it was reading near 0 at .4 volts. This indicated that the main spool did not move. We then move the selector switch to drive the valve with the box. The voltage was increased to 10-volt manually. The LVDT feedback continued to read .4 volts indicating that the pilot valve shifted but the main spool did not. We removed the valve assembly and found that contamination had caused the spool to stick.

The S-Series ServoSensor™ is a complete servo controller installed and interfaced inside an MTS® R-Series platform. It consists of a Servo Controller Module (SCM), driver module (DM) and sensing element (SE) combined inside the sensor head body. MTS® proprietary technology is integrated directly to the SCM. This integration in the SCM provides the ServoSensor™ Controller with very fast displacement measurements and servo control outputs. Hydraulic cylinders can typically be positioned to .001"

This is a robust design for longer operation and performance which means more uptime. This system was designed with ease of use and ease of installation in mind for all varieties of our customers. Call for more information.

SEVERAL CHIP BINS

Peerless Chip Bin MOD 14

PEERLESS - Stationary, ...Truck DumperPEERLESS Trailer Dumper with 50 ft. deck. -- Hydraulic power unit. -- Includes: Outfeed Conveyor for chip or other product removal. -- Ready to load; ... Save removal costs. -- This machine has the feature of a long deck, although in pieces, but complete.

PEERLESS - Truck & Trailer Tipper & Receiving BinComplete with the following major components & features: -- Receiving Bin with Chain Bottom Discharge. (No transport conveyor after the bin.) -- 63° Tilt, 65 - 70 Ton cap., and 65 ft. Deck length. -- Twin hydraulic cylinders on each side. -- Dual hydraulic units. -- (2) Safety Bows.NOTES: &#9679 This System seems to be in very nice condition despite being shut down for perhaps (10)years. &#9679 Used at a paper mfg. facility. &#9679 Has been dumping full trucks and trailers.

(2) 14 Unit Peerless Chip Bins Down and Ready to ship.

PEERLESS - MONO 21 Unit , ...Material Chip BinChip Bin main components: -- Bin with 21-Unit (4,200 cubic feet) capacity. -- Hydraulic power unit. -- Steel support structure. -- Clamshell-type material discharge doors. -- Price shown includes dismantling & loading onto trucks. -- Infeed Conveyor shown is NOT included, but is available as an optional item.

Peerless 21 unit chip bin, ready to load

Peerless 21 unit chip bin, ready to load

PELLET.TOWER Pellet Manufacturing System. -- Complete modular, vertically designed Pellet Manufacturing System within a 65' tall free-standing tower containing all the Pellet Manufacturing equipment necessary on a 17' x 20' concrete pad including all pellet producing material handling & conveyor systems. -- 25,000 - 30,000 Tons annual pellet capacity from wood or agricultural waste streams. -- Tower includes: (6) Levels, vertically integrated on top of each other; an operator monitoring station is located at the ground level, processing equipment is in the top (5) levels. -- Each level has direct "walk-up" service and maintenance access without personal lifts, ladders, or other access devices. -- Complete integration of electric power supply & panels, Compressed Air, Air Filters, and Dust Collection, with safety controls linked throughout the automated system. -- System designed to run and be maintained by (1) on-site operator or off-site with remote PC monitoring of the entire process. -- Each level includes high quality brand name equipment: Hammer Mill at the beginning of the process, Material Holding & Dosing Bin, as well as the Dust Collection & Air Handling system at the very top of the Tower. -- Binding Agent System, multiple Foreign Material Separators, Water Dosing with moisture control; Ripening Silo; high production Pellet Mill, Pellet Cooler, final Screening Station on levels below. -- Includes following auxiliary equipment: Process Control with full Visualization (on Monitors), Fire Protection, Explosion Prevention, Dust Collection, Spark Detection, Water Distribution, Compressed Air, and a Central Vacuum Cleaning System that makes all a clean enclosed work environment. -- The 6-levels are in a completely self-contained steel structure, enclosed with insulated sandwich panels and weatherproof cladding. -- Post-installation, in case of relocation, the Tower can be divided into (4) units for transportation on flatbed trailers; dismantling & reconstruction requires approx.(6) weeks. Pricing includes "delivery to site, installation & training". Please ask for full quote with all specifics - and geared toward your location, material, and application!

The PELLET.TOWER is a modular, vertically designed Pellet Manufacturing System providing an innovative, but proven solution to biomass pellet fuel production."Single Tower Series": -- Capacity: 2.8 - 6.6 tons/Hr (2.5 - 6.0 metric tons/Hr); -- Installed power: 415 - 750 HP (310 - 560 kW); -- Dimensioins: 17' x 20' x 69' (5 x 6 x 21 m); -- Weight: 79 - 90 tons (72 - 82 metric tons)."Dual Tower Series": -- Capacity: 6.6 - 11.0 tons/Hr (6.0 - 10.0 metric tons/Hr); -- Installed power: 945 - 1,275 HP (705 - 950 kW); -- Dimensions: 32' x 18' x 75' (10 x 5.5 x 23 m); -- Weight: 157 - 165 tons (142 - 150 metric tons)."Triple Tower Series": -- Capacity: 10 - 15 Tons/Hr. (9.0 - 13.6 metric tons/Hr); -- Installed power: 1,542 – 1,823 HP (1,150 – 1,360 kW); -- Dimensions: 67.25' x 26.9' x 75.13' (20.5 x8.2 x 22.9 m); -- Weight: 232 - 243 tons (210 -220 metric tons).System Highlights: -- Over 100.000 Hrs operating experience. -- Modular system to produce high quality pellets; -- Standardizes components; -- Compact design (small footprint); -- No building required ("single machine"); -- Semi-mobile system (relocation possible).Main Components: -- Feeding bin; -- Binding agend adding; -- Foreign material separator; -- Hammermill; -- Air/material separator; -- Conditioning bin(s); -- Pellet mill(s); -- Central lubricator; -- Pellet cooler(s); -- Pellet screen(s); -- Exhaust air filter; -- Compressed air; -- Fire/spark detection & extinguishing; -- Central vacuum cleaning system; -- PLC control & visualization.

Pendu Jr with Deutz diesel. Good used condition. It is being used almost every day.

Pendu Material Blower