Equipment For Sale

LOCATED IN BOONVILLE, NY

(2) 3 HP Spindle Driver Motors Wired 3-Phase 240 30" X 48" Work Table Surface

RITTER - R-46: Double Row Line BorerEquipped with: -- (2) 23-Spindle units; drills from the top; distance between rows 4" - 22"; both heads adjustable on rack & pinion w/digital readouts. -- 30" x 48" Table cycles up/down - 3" max. stroke; (2) 3 HP - 1,725 RPM motors; spindles gear driven. Complete with: -- 48" Back fence with: (2) Stops; (2) pneumatic holddowns per head; magnetic motor controls. -- Foot pedal operated; air requires 90 PSI; drill requirements: (24) RH & (22) LH Drill bits with 10 mm shaft & 55 mm OPL. -- Double-row Line Drill with: (23) Spindles; standard 10 mm shanks on collets.

RITTER R-26 Boring Machine (2-Head Line Boring)(2) 13-Spindle belt driven drill heads, drills from the top down, each head with 2 HP - 3,450 RPM motor; both heads with rack & pinion adjustment 4" min. to 24" max. spacing, spindles on 2" centers, 10 mm collets; 30" x 48" table, table cycles up/down with a 3" stroke. -- Equipped with: (2) Adjustable stops, (2) spring hold-downs on rear head; and foot pedal actuated boring cycle.

Ritter Shaper

Ritter 3 Spindle Boring Machine

This machine has been cleaned, repaired and checked over, ready for a new home! (2) 3HP motors 460V 3Ph 6 pneumatic stops for use in horizontal or vertical drilling 72" precision machined back fence 6 fence stops, 4 table stops (2) 23-spindle drilling heads, one horizontal, one vertical 3-position turret dept stop on vertical head 5 pneumatic holddowns Magnetic motor controls 32mm spindle centers 10mm collet diameter 1725 RPM spindle speed 90 PSI air requirement 3" max. drill stroke

36" X 72" Work table area, 24" door width & unlimited door length capacity. Capable of producing a complete raised panel detail in one (1) minute. Routers are guided by the fences or templates attached to the fences. -- Equipped with: (4) 3" Bore AC 20 clamp cylinders; (4) 1-1/2" x 1-1/2" adjustable fences; (2) 1.5 HP router motors with dust hoods; (1) 7/8 HP router with dust hood; and (1) 1475-H Heavy Duty 3-1/2 HP Hogging Router w/ cutter & dust hood. -- Complete with: 1475-A Tooling set, template guides; regulator and gauge; and (4) 2-1/2" dia. X 8' long flexible dust collection hoses.

Designed for machining of beaded face frames, cabinet doors and related joint construction. The machine miters all required corners and notches without the need to change a set-up. -- Production time is reduced to seconds with the use of the 6,500 RPM cutterhead capable of machining (2) parts at the same time. -- Standard Features: 7.5 HP spindle drive motor, 40 MM diameter 6500 RPM spindle, 7" maximum cutter head diameter, Adjustable pneumatic cutter head feed stroke, 60" stile & rail alignment fence, 16" material width capacity, (8) quick reference material fence alignment stops (6) quick reference fence offset stops, (4) hold down clamp cylinders. -- 48" wide table with 34" fixed work table height, magnetic controls, foot pedal controlled machining cycle. -- Tooling Options Sold Separately ($4,500): 7/8" Cutter head pattern, 5/16" bead carbide tipped, 1" cutter head pattern, 5/16" bead carbide tipped. Custom pattern heads upon request. -- Additional Options: 72" & 84" alignment fences, additional fence offset stops, additional fence stops. -- 4" diameter dust outlet. Weight: 1,430 lbs. -- This machine is also available with a 5 HP 220V single phase motor at the same price.

RITTER R-30RP Raised Panel Door Shaper(3) Shaper Spindles mounted in a precision ground worktable (68" X 52" Deep X 36" Working Height ) Designed for running raised panels, as well as style & rail material for raised panel doors. -- Preset Spindle Locations, Equipped with (2) 5 H.P. Spindle Drive Motors On Right And Left Spindles, and (1) 7.5 H.P. Spindle Drive Motor At Center Spindle. -- The 1-1/4" Diameter Variable Speed Spindles are driven with Micro-V Belts. 5-1/2" max. cutter dia. -- 1st Spindle: 2" high x 12" wide max. tenon. 2nd Spindle: Setup for shaping of raised panels. 3rd Spindle: Setup for machining of style & rail and outside lip of door. -- Complete with: Micro Adjusting Fences, Miter Gage Slot at Right Hand Spindle (3/4" W X 3/8" Deep), Dust hoods (3 - 4" Connections), and Door Interlock Safety Switches.Suggested Options -- H154: PANELCRAFTER 24" Capacity Panel Jig, with 2 Cylinders. -- Jigs float on a cushion of air for smooth, easy operation. Proven design for years of trouble free use. Single thumb lever activates floating and clamping cylinders. Use with material thickness up to 2" thick. Self centering mechanism, and Variable flotation regulation. Large hand grips help operator control work piece. Change door style by simply changing the templates using a wide range of template designs and sizes. This Option requires 2 CFM at 80-100 PSI of supplied air.- R10TESA: Coping Attachment -- Fits any 3/4" by 3/8" deep slot, 2" X 12" capacity, with (3) Adjustable hold down clamps.- H161: Power Material Feeder, with reversing. -- (3) 20mm Rubber Rollers, 1HP Motor, 8 Adjustable Speeds (6,13,18,21,36,42,54,102 FPM)

High quality American made fixed spindle Shaper. -- Fabricated steel base with precision ground built-in cast iron table. -- Table insert rings to easily accommodate a wide range of cutterhead dia. -- Interchangeable spindle with lock for easy tool change. -- (8) Spindle speed settings for a variety of size cutters. -- Spindle reversing switch as standard. -- Standard 3/4" x 3/8" groove in table for miter gauge (not included). -- Large hand wheel for manual spindle height adjustment. -- Electronic digital height display. -- Micro-adjustable fence that easily adjusts for short runs. -- Large cabinet style door for easy access to motor & quill assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch. -- Integrated dust shroud & spindle guard assembly with manual holddown. -- Emergency stop. -- Operations manual, parts list & tool kit.

RITTER R-20 Double Spindle Shaper:High quality American made fixed spindle Shaper with (2) Spindles. -- Fabricated steel base with precision ground built-in cast iron table. -- Table insert rings to easily accommodate a wide range of cutterhead dia. (4-1/2" max. opening without rings). -- (2) Solid 1-1/4" spindle with lock for easy tool change. -- (2) Spindle speed settings for a variety of size cutter sizes and Spindle reversing switch. -- Standard 3/4" x 3/8" groove in table for miter gauge (not included). -- Large hand wheel for manual spindle height adjustment. -- Micro-adjustable fence that easily adjusts for short runs. -- Large cabinet style door for easy access to motor & quill assembly. -- Self-braking motor and Emergency stop. -- Magnetic starter & thermal overload switch. -- Integrated dust shroud & spindle guard assembly with manual holddown. -- Operations manual, parts list & tool kit.

RITTER - R-19 F1, ...Single Row Line Borer -- Specifications:Single row 23-spindle Line Drill; 32 mm spindle centers. -- 3 HP - 3,450 RPM motor; pneumatic activation of the drill cycle; drills from the top-down. -- 12" Max. depth from spindles to back fence; 3" max. stroke of head; accepts 10 mm drill shanks. -- Equipped with:14" x 48" Table; 60" back fence with: (4) Fence stops and repetitive line pins. -- Complete with:(2) Spring loaded holddown pins; Vernier scales in "X" / "Y" for quick stop pin setup/changeover adjustments.

RITTER DR-3553 Profile Sander2 HP TEFC Motor with direct drive spindle which tilts 90° forward & 20° backward.Specifications: -- 400 - 1,800 RPM Inverter controlled variable speed with RPM display. -- 4" Vertical & 8" horizontal spindle adjustment. -- 36" x 33" Solid northern hard maple tabletop and 36" table height. -- 1-1/4" Dia. x 4" long spindle to accept standard sanding discs and profile discs made to customer's specifications. -- Enclosed fabricated steel base. -- Dust hood w/piano hinge for easy ascess to sanding disc. -- Stationary fence and large hand wheels for easy spindle adjustment.

RITTER - R-46: Double Row Line BorerEquipped with: -- (2) 23-Spindle units; drills from the top; distance between rows 4" - 22"; both heads adjustable on rack & pinion w/digital readouts. -- 30" x 48" Table cycles up/down - 3" max. stroke; (2) 3 HP - 1,725 RPM motors; spindles gear driven. Complete with: -- 48" Back fence with: (2) Stops; (2) pneumatic holddowns per head; magnetic motor controls. -- Foot pedal operated; air requires 90 PSI; drill requirements: (24) RH & (22) LH Drill bits with 10 mm shaft & 55 mm OPL. -- Double-row Line Drill with: (23) Spindles; standard 10 mm shanks on collets.Includes: -- Boring bits: 5 mm x 57 mm. -- Included: Custom sheet metal hoods; 6" flex hose for dust collection. -- (1) Lot of set screws for bit holders.

Ritter R220 Pocket Hole Borer

RM JOHNSON - L 2, ...EZ Logger Baler -- Boom: Extra long 27 feet -- Can load out high-side Gondolas -- Grapple: Continuous rotation -- Hood: 7000 Crane with Out Riggers -- Bale chamber size: 84" x 54" x 60" -- Bale weight: 800 - 1,200 Lbs -- 3-Minute bale xycle -- (2) 8" Cylinders

Robinson Hurricane Chop Saw 18" 5 HP 3 phase 208-230/460 volt Right to left hand Pneumatic pedal control

ROBINSON - EF/T, ...36" Band Resaw Solid Heavy-Duty Vertical Resaw. Equipped with: -- 3-Phase Electric Motor. -- 36" Dia. balanced steel wheels. -- 4" Max. band width capability provides feed speeds up to 100 FPM. Complete with: -- Large work surface for the most demanding jobs

ROBUST SD 45 Vertical Low Noise Grinder; The model SD 45 is characterized by low power consumption, high productivity, and ease to use.Features: -- Universal use (diverse wood, particle boards, veneer, MDF plates, cardboard boxes, plastics, etc.); -- Completely automatic operation -- The engine start-up is controlled by the star/triangle system -- Hardened knives with four cutting edges with an extended service life -- The crushing unit without any mechanical obstacles that could cause stopping -- The HARDOX sieve -- Simple installation, plug-in and start-up -- Economic use of energy -- Extremely quiet operation -- Simple and minimum maintenanceTechnical Specifications: -- Motor: 20 HP (15 kW) -- Rotor diameter: 150 mm -- Rotor speed 140 RPM 140 -- Number of knives: ) 17 (15 + 2) -- Top opening 640 mm x 430 mm ( 25.2" X 17") -- Dust extraction size 152 mm diameter -- Weight 950 Kg (2090 Lbs) -- Screen with holes available from 10 to 50 mm (comes standard with 12 mm screen) -- Production capacity: Approx. 0,5 - 1,5 Cubic meters per minute