Equipment For Sale

Very good set of track groups to fit Timbco/Valmet track feller buncher. @4 inch single grousers

2000 VALMET 646F DOUBLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS SQUIRT BOOM BYPASS BUCKET 700 HOURS ON NEW MOTOR

2007 Valmet 840.3, 13,863 hrs., Turbo diesel, 6x6, Differential lock, Valmet CRF 8.1 crane, extendable boom, Bypass Grapple w/rotator, approx. 72" decking blade, EROPS, Joystick controls, Heat/AC, Radio, Maxi monitor, 600/65-34 front tires, 600/55R26.5 rears, $69,500

2007 Valmet 425EXL Feller Buncher, Valves Resealed, Fresh Undercarriage, Enclosed Cab with Heat and Air Conditioning, 28" Pads, Has Quadco 22" Sawhead with 360 Degree Swivel, Leveling Cab, More Pictures Coming Soon, Ready for the Woods. Operating weight: 54,002.3 lb Shipping length: 14.57 ft Height to top of cab: 12.34 ft Width: 10 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Valmet 544X Woodstar Series II Forwarder, Single Bunk, NEW ENGINE, Frame hours are 14,700. Center Section is Tight Enclosed Cab with Heat, No Air Conditioning, Bunk Length is 11' Will handle up to 16' Lengths, New Lexan Glass, 12 Speed Transmission, Has Used Transmission Installed Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 VALMET 544X SINGLE BUNK FORWARDER 4 CYL FORD POWERSHIFT LEVER CONTROLS BYPASS BUCKET DOES HAVE WEAK TRANSMISSION

2004 Valmet 840.2, 19,188 hrs., Fixed cab, 2 speed trans., Hydro brakes, Trellebong Forestry Tires 600-55-26.5 75%, preheater, NEW drive pimp, drive motor, transmission bearing kit, shift plunger, and shift fork installed, $79,500

2012 Valmet 430FXL-1, 7452.2 hrs., Quadco fixed bunching head, leveling cab, Heat/AC, AM/FM Raido, Undercarriage in excellent shape, Standard tracks w/30"pads, new front idlers installed, cab/seat in nice shape, as well as the paint and all panels and guards and glass, $169,500

VALMET 646 DOUBLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS EXTENDA BOOM 28L-26 FRT 700/50-26.5 BOGGEYS

MLS Number 9829758 Product Description 2005 Valmet 415EX Tracked Processor One Owner 16,000 Hours Sisu Engine recently rebuilt 30' reach with telescopic outer boom Valmet 370E Processor Head needs rebuilding Undercarriage at 50% 36" flotation pads

2008 Valmet 911.4 Harvester, With 2013 365.1 Processing Head, Engine has 16,000 Hours,Upgrades and new parts in machine includes, -New hydraulic pump, New computer and new screen, valve banks resealed on chassis and crane in 2020, all boom cylinders repacked 2020,New wiring down boom and to head, tilt cylinders repacked,. knife cylinders repacked, center section of valve bank resealed, New spherical ends and pins on knife cylinders, New wiring for measuring wheel, New diameter sensor, both feed roller motors resealed, new head rotator motor, New secondary boom section, New PCX-4 Computer and Screen. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Valmet 860.3 Forwarder, Enclosed Cab with Heat and Air Conditioning, 15,100 Frame Hours, Bogies are Good, Tires are 80%, New Computer System, Comes with a set of Eco Tracks. Ready for the Woods. Operating weight 10.5 t Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Valmet 911.3, 15,602 hrs., SISU 74ETA Engine w/2 spd hydrostat trans., Webasto pre heater, Rear Tires 700-55-34 / Fronts 700-55-26.5, all tires roughly 60%, 370.2 harvesting head, paint, guards, glass, doors, windows, mirrors all in good shape, $39,500

Like New Ryans Dangle Head Model 3550 400 Hours Dual Brake System 18.5K Frame Hours 8200H on 6.7 Cummings 70% U/C Heat/AC

Valone Cone 22" Ring Debarker

1986 Valon Kone 22" Ring Debarker with Hydraulic feed rollers

Valone Kone ring debarker, electric drive, includes infeed/outfeed, working condition

VALTORTA FV-P Stain Roll Coater51" Width cap., single head roll coater 1.5 HP variable conveyor speed 80 - 100 FPM.

The Vantec Wood Wast Drum Chipper is used to produce chips from logs and veneer waste. It has a roller infeed system, rubber conveyor belt and hydro-pneumatic unit to lift the rotor for maintenance. Manufacturer specs: - Width of inlet: 600 mm; - Height: 200 mm; - Rotor diameter: 600 mm; - Toothed roller: 01 upper and 02 - lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical - gears); - Upper Rollers motor size: 5 hp; - Upper Rollers motor size: 5 hp; - Feed speed: 40m/min; - Number of rotor knives: 02; - Wood chip size: 30 - 40 mm; - Chipper screen: size: 65 x 65mm - Main motor 100 hp 4P: Included; Drive panel: Included; - Estimated production: 38 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 650 mm; - Height: 1 .000 mm; - Overall length: 5800 mm; Approximate weight: 2,900 kg.

This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. - Width of inlet: 600 mm; - Height: 300 mm; - Rotor diameter: 800 mm; - Toothed roller: 01 upper and 01 lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical gears); - Metal detector: Flat model; - Rollers motor size: 5 hp (2x); - Number of rotor knives: 02; - Wood chip size: 25 - 40 mm; - Main motor 125 hp 4P: Included; - Drive panel: Included; - Lead Time: 240 Days; - Estimated production: 55 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 850 mm; - Height: 1 .150 mm; - Overall length: 6 700 mm; - Approximate weight: 4,900 kg.