woodworking Equipment For Sale

100 HP - 1800 RPM Belt driven. -- Jacketed water-cooled requiring 14 Gpm. -- All stainless wetting surfaces and replaceable stainless tools. -- 24" Inside diameter x 102" inside length. -- 14-1/2" x 18" inlet and 12" x 30" outlet. -- Capacity rating is 6,600 to 26,400 pounds per hour at 6 pound density.

LMC DUST COLLECTOR, 7,000 CFM +-, 20HP DIRECT DRIVE FAN with VFD, FAN: INLET DIAMETER: 17 inch +-, OUTLET 12 inch X 14 inch +, & a Inverter drive MODEL # 472-IRWC-917RB-100/64 SERIAL # 05216 DATE 1/07 CFM: 7,000 +-, @ 12” Static Pressure, VFD: LEESON SPEED-MASTER -ADJUSTABLE SPEED AC MOTOR CONTROL MOTOR: 20HP, 230/460VOLTS, 49/24.5 AMPS, 60HZ., Encl.TEFC, 4 BOTTOM FILTER BAGS: are not included 2FT X 4FT LONG, 24 TOP FILTER BAGS 9-1/2” WIDE X 6+FT LONG, BUYER WILL NEED TO VERIFY ALL SPECS. & INFORMATION WITH THE MANUFACTURER, INCLUDES FILTER BAGS- FREE STANDING FLOOR MOUNT FAN FOR QUICK & EASY INSTALL, PRICE INCLUDES A WOODEN CRATE FOR BETTER CARE DURING THE SHIPPING PROCESS. FREIGHT RATES ARE AVAILABLE UPON REQUEST WAS REMOVED FROM A CABINET SHOP IN MAY 2026. WE HAVE A VIDEO FAN RUNNING AT THE CABINET SHOP. 89-26

Lobo 6-Head Moulder 9" Wide capacity

2004 Lobo 5 Head Moulder

GB-CIS Single-end 575V / 3 Ph / 60 Hz 5” wide rubber pad conveyor Equipped with industrial motor for full power cutting and sanding capacity

LOCATELLI "OMK-300" Automatic Lathe with Sanding; From automatic feeding to finished product ejection - a complete "Turning & Sanding" System. -- 11-13/16" Max. between centers, 3-1/8" max. & 5/16" min. stock dia., 5.5 HP spindle motor with (3) spindle rotations of 3,020 - 4,580 & 6,400 RPM.6-Station Rotary Carousel/Drum with the following operations: -- Station 1: Pickup and centering of workpiece. -- Station 2: Turning with hydraulically operated roughing & finishing gouge. -- Station 3: Finish turning with hydraulically operated finishing gouge; rough & finish gouges advance via 1.5 HP hydraulic motor at a rate of 0.33 - 52 FPM. -- Station 4: Initial sanding with adjustable 0.5 HP vibrating brush. -- Station 5: Secondary sanding with adjustable 0.5 HP vibrating brush. -- Station 6: Ejection of finished workpiece. -- PLC Function for immediate fault detection and facilitates setup. Complies with CE high standards for operator safety. -- Features: Billet capacity has been increased to a special 5.9" x 5.9" (150 mm square). -- Complete with: Separate operator control panel. -- Includes: Inventory of spare parts and tooling. -- Machine kept under power but has not been used for production for several years.

Loewer DM 3P, an industrial-grade sanding and denibbing machine perfect for high-precision surface finishing. Manufactured in 2012, this heavy-duty machine is built to handle a variety of materials, including metal, wood, and composites. Loewer is a trusted name in the industry, known for producing reliable and efficient machinery that meets the demands of rigorous manufacturing environments. Voltage: 480V, 3-Phase Max Current: 56A Weight: 3500 kg (7,716 lbs)

LOEWER DISC MASTER 3DBB Denibbing Sander with (2) Sanding Stations, 53" Width Capacity:53" Width cap. Denibbing Sander with a patented combination of rollers and rotating/oscillating discs make the LOEWER Discmaster 3DBB Sanding Machine the ideal finishing solution for entry doors, cabinet doors, drawer fronts, sheet goods, shutters, face frames, furniture and much more. -- Ideal solution for all sanding applications including whitewood, stain and sealer coats (including UV). -- Operation: The workpiece first passes under (16) rotating discs with abrasive brush loadings and then under (2) large counter-rotating spiral brush roller type hubs,Head Configuration: -- 1st Unit: (16) Rotating discs 250 mm (10") diameter each with (24) keyways 75 mm (3") long that oscillate from left to right; provides very uniform edge breading in whitewood sanding and eliminates most (if not all) hand sanding of the sealer coat. The discs are variable speed from 50 - 300 RPM by frequency inverter. Eccentric orbital disc movement (patent pending). Separate height adjustment of the disc station to run discs only or brush rollers only or everything together. Digital display to show the height of the discs. -- 2nd Unit: (2) - 400 mm 16" dia. rotating brushes sanding rollers powered by 2.2 kW gear motor with external coolers. -- Variable spindle speed 14 - 300 RPM adjusted by frequency inverter on each spindle and separately adjustable. The first drum rotates with the feed and the second rotates against the feed. Includes a panel blow-off station. -- The patented combination of rollers and rotating discs provides very uniform sanding across the entire workpiece, even into deep profiles without losing detail. Specifications: -- Disc oscillation by 0.37 kW (0.5 HP) motor, (0 - 60 Cycles/Min). -- Min. part thickness 4 mm (3/16") and max. 4"; -- Vacuum bed with 7.5 kW (10 HP) motor; Vacuum blower outlet on side of the machine has 200 mm outlet. -- Variable vacuum bed conveyor feed speed from 3 - 15 m/Min (8 - 50FPM). -- Pneumatic belt centering system. -- Fixed bed height for installation in a line. -- Separate variable speed adjustment for disc & roller. -- Antistatic brush strip device. -- Control panel Left Side-mounted. -- Emergency stop pull cords at both infeed and outfeed. -- Dust extraction outlets 3 x 80 mm (3.2") 4 x 140 mm (5.6") and 1 x 200 mm (8").Equipped with: -- PLC Touch-screen control: Simple & user-friendly "TOUCH SCREEN" PLC control with color monitor; PLC storage capacity for up to (25) individual sanding programs; -- the PLC control interface also allows for easy machine connection to a flat-line, tow-line or hanging-ling finishing system.

LOEWER - DiscMaster: Denibbing Sander with (3) Sanding Stations; 53" Width Capacity53" Width cap. Denibbing Sander with: Patented combination of rollers & rotating/oscillating discs make the LOEWER "DM3D2BB" Sanding Machine the ideal finishing solution for: Entry doors; cabinet doors; drawer fronts; sheet foods; shutters; face frames; furniture; ...much more. Ideal solution for all sanding applications including: Whitewood; stain; sealer coats (including UV).Head Configuration -- 1st Unit. (16) Rotating discs oscillates from left to right; provides very uniform edge breading in whitewood sanding; eliminates most (if not all) hand sanding of the sealer coat. - Variable speed: 50 - 300 RPM. -- 2nd/3rd Units: (2) 16" Max. dia. rotating brush loaded sanding rollers with: Panel blow off station.Sanding heads are counterrotating. Head speed variable from: 20 - 300 RPM. -- The patented combination of roller & rotating discs provides very uniform sanding across the entire workpiece, even into deep profiles without losing detail. Separate height adjustment of the disc station (to run discs only or rollers only or everything together) with: Electronic digital display to show height of disc station.Specifications -- Disc diameter: 250 mm (9-3/4"); motor for the disc station: (2) x 1.5 kW. -- Disc oscillation by: 0.37 kW (1/2 HP) motor; (0 - 60 Cycles/Min). -- Min. 4 mm (3/16") and max. workpiece thickness 4"; motorized thickness adjustment. -- Motors for roller station: (2) x 2.2 kW. -- Vacuum bed with: 7.5 kW (10 HP) motor; vacuum blower outlet on side of machine: 200 mm Outlet. -- Variable vacuum bed conveyor feed speed from: 10 - 50 FPM; machine is fixed height for use in a Finishing Line. -- Max. part thickness / height of workpiece: 100 mm (4"). -- Separate variable speed adjustment for disc & roller from: 25 - 300 RPM.Includes -- PLC Touchscreen control: Simple & user friendly "TOUCHSCREEN" PLC control with: Color monitor. -- PLC Storage capacity: Up to (25) individual sanding programs. -- PLC Control interface: Allows easy machine connection to a flatline, towline, or hang-line Finishing System. -- (2) 140 mm & (3) 80 mm Dust Outlets on top of machine.Dust Extraction Outlets -- Blowing Device: (3) x Dia. 80 mm (3.2";); rollers: (4) x Dia. 140 mm (5.6";); vacuum: (1) x Dia. 200 mm (8";).Plexiglas windows both sides. -- Connection for compressed air supply: (1) Bar for air cooling electric cabinet box; includes water & oil separator.Dims & Weight. Machine weight: Approx. 4,500 Lbs; dims are approx.: 86" Wide x 118" long x 88" tall. -- Approx Load: 47 Amps @ 480/3/60; QAI Approved: By Special Inspection.Actual model: LOEWER DiscMaster DMDDDBB

Loewer Discmaster 6TD Brush Sander Vacuum Bed

Reconditioned MAC 144MCF153 Reverse Air Bag House, 2,219 SQ/FT Cloth Media, 18,000 CFM Capacity @ 8:1 Air/Cloth Ratio, 12” Rotary Valve, Structural Support, VERY GOOD CONDITION, $38,000

1997 NPN MACO Tie Machine, s/n 1997001, 100hp electric motor on side planers, includes electric control box, 4-1/2" capacity, power outfeed.

MAGGI SYSTEM 23 Construction Line BorerConstruction Boring Machine that drills vertically from bottom and horizontally from rear.Specifications: -- 23-Spindle head on 32 mm centers. -- Table size: 38" x 16". -- Max. working width: 25". -- Drilling stroke: 2-1/2". -- Main motor: 2 HP. -- Adjustable drilling depth with patented spiral setting device: ?0 to 2-1/2". -- Tilts pneumatically from lower to rear position with locking points between 0° - 90° for drilling any angle. Equipped with: -- 120" Back fence with: (4) Stops. -- Foot pedal control. -- Magnetic Starter with overload protection. -- (23) Quick-change chucks. -- (2) Patented quick-release pneumatic holddown clamps with independent manual movement. -- Dust outlet: 3".

MAGGI - System 21 Prestige: Construction/Line Borer Adjustable 21-spindle boring head on: 32 mm Centers with position indicator.Specifications -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with: Patented setting device. -- (2) Patented material clamps with: Auto setting & safety feature. -- Head height fine adjustment with: Mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with: Mechanical digital side fences for mirror image. -- 120" Line Boring fence with: (2) Repeat stops. -- Foot actuated: Pneumatic clamps & drill cycle. -- Equipped with: Magnetic starter; overload protection; (1) set of "quick change" chucks.

MAGGI - SYSTEM 46: Double Row Line Borer(2) 23-Spindle heads on 32 mm centers; drills from bottom up.Specifications -- (2) 1-1/2 HP - 2,800 RPM motors; 5" min. & 25-19/32" max. working width between heads; 4" drilling stroke; drills vertically from bottom so chips fall out of holes. -- Heavy overhead material holddown system with: (6) Pneumatic material clamps. -- 16" Retractable infeed & outfeed support roller system for long panels. Complete with: -- "Quick Change" drill adapters; patented "quick set" system for depth of drilling. -- 120" Extension fence with: (4) Flip stops; reference pin for continuous line drilling; foot pedal control.

MAGGI SYSTEM 23 Construction Hole Boring Machine Adjustable 23-spindle boring head on 32 mm centersSpecifications: -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with a mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 38" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Dust Outlet: 3".Net weight: 630 Lbs; Dimensions: 51.7" x 37.8" x 50" Tall; Crated Dimensions: 44" x 38" x 42" Tall; Crated Weight: 664 lbs.Available in single phase ... Add $ 600.00

MAGGI SYSTEM 29 CONSTRUCTION/LINE BORERAdjustable 29-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 46 Double Head Line Boring Machine:Heavy Double Head Line Borer with (2) 23-spindle heads; 32 mm spindle spacing.Specifications: -- Drilling from the bottom up and with 5-1/8" - 25-19/32" distance between rows. -- Drilling vertically from the bottom allows the chips to drop down falling out of the holes. -- Drilling depth of up to 2-1/16" (55 mm) max., takes only seconds to set. -- (2) 2 HP - 3,500 RPM Commercial Duty motors; spindles with steel gears & high quality bearings. -- Easy repetition by (2) air index pins for continuous line drilling, left and right roller track supports extend up to 400 mm (15-3/4") for larger panels.Features and Includes: -- 120" Back fence with (4) repeat "flip" stops; includes 27-3/4" (704 mm) fence for quick positioning of flip stops. -- (6) Pneumatic holddowns to automatically actuate when the drill cycle begins. -- (46) "Quick Change" chucks for easy tool change. -- Magnetic motor controls and 1/4" air regulator with filter and oiler; 100 PSI required air pressure.

MAGGI SYSTEM 21 PRESTIGE Construction & Line BorerAdjustable 21-spindle boring head on 32 mm centers with position indicator.Specifications: -- Stops in 0° and 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with magnifying glass viewer. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (2) repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks.OPTIONAL: -- 230V Single Phase add $600.00 --29900100 Stop Reference Pin for Line Boring $195.00 -- 26000069 Set of Reference Fences for 45 and 90 degrees $195.00 -- 36000061 Additional Quick Change Bit Adaptor $27.50 ea -- 29971019 Additional Holddown Cylinder Assembly $395.00 ea -- Hinge Boring Head (Specify Blum, Grass, Salice, or Hettich) $695.00 -- TDBSE5705LH or RH 5mm x 57mm LH OR RH Brad Point $9.85 ea -- TDBSE5708LH or RH 8mm x 57mm LH OR RH Brad Point $11.95 ea -- TDBSEHB5735LH or RH 35mm x 57mm LH OR RH Hinge Point $26.80 ea -- FREIGHT TO ANYWHERE IN THE CONTINENTAL USA $ 300.00

MAGGI SYSTEM 35 CONSTRUCTION/LINE BORINGAdjustable 35-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!