Woodworking Equipment For Sale

Timesaver Mdl 337-6 36" Belt Sander S/N 18395

TIMESAVERS 4331-45-001 Wide belt sander (3) heads 51" width cap. 1st Head 9-1/2" Dia. rubber covered (60-65 Duro) 40HP motor 2nd Head 9-1/2"Dia. rubber covered (60-65 Duro) 30HP motor 3rd Head Combination head with 6" dia rubber covered contact roll and a 2-1/2" finishing platen. 30HP motor. 52" x 103" abrasive belts with dual "posi-trac" electronic-solid state tracking Controls mounted on belt loading side Conveyor feed belt replaced (2) years ago.

Timesavers Model 2321-24-01 Sander 43"x75" Belts 2-Head IceClean System on each head

Timesaver 2331-45-006 (3) Head Wide Belt Sander;52" Width cap , Drum, Drum, Combination HeadHead configuration 1st Head: 30 HP motor, 8" dia. rubber covered serrated drum with 65 / 70 duro.2nd Head: 25 HP motor, 8"dia rubber covered serrated drum with 65 / 70 duro.3rd Head: 25 HP motor, segmented combination, drum/platen 5-1/2" dia. drum also with 65 / 70 duro drum and a 2-1/2" platen;Specification -- 3rd head has abrasive belt air jet blow off. -- Variable feed 15 / 45 FPM; -- Double in-feed and out-feed rubber covered hold-down rolls.Equipped with & Features -- Star Delta starters on all heads; disc brakes on main motors. -- In-feed stop bar, motorized bed table lift -- PLC controller with HMI interface, electronic abrasive belt tracking. -- This is not a constant pass line sanderNote from Seller: 1800 Hours! We are the 2nd owner of the unit. Well maintained by original owner and purchased by us in 2022. At that time the machine was inspected an by original owner and purchased by us in 2022. At that time the setup and all adjustments done by TS tech

2-Head, 42" width capacity Sanding / Denibbing system. -- (2) 5" Wide platens featuring a "dual" action head with a high speed orbital movement and combined back & forth oscillation to remove abrasive belt crossgrain scratches; platens designed with a quick change system for abrasive material. -- (1) Nylon abrasive impregnated (150 grit) Cleaning / De-Nibbing brush, 10" dia., drive unit for brush rotation, brush wear adjustment via jack screws. -- Vacuum holddown conveyor system with variable feed speed 5 - 15 FPM. -- Double infeed and outfeed holddown pinch rollers. -- Power raisng and lowering of the conveyor bed with AUTO-SET feature, 0" to 6" part thickness capacity. (4) DUFF-NORTON acme screw jacks under conveyor bed, 36" infeed conveyor area.

TIMESAVERS - 352 HDA, ...Abrasive Planer/Sander2-Head, 51" width cap. Heavy Duty Sander. -- 1st Head: Smooth steel contact roll, 11-1/2" dia., 75 HP motor. -- 2nd Head: Spiral Grooved hard rubber contact roll (11-1/2" dia.) , 75 HP motor; 52" x 103" abrasive belts (6,300 & 4,300 SFPM) with POSI-TRAK electronic tracking. Equipped with: -- Heavy-Duty solid rubber (no vacuum holddown) feed belt for Heavy-Duty operation. -- Motorized part thickness adjustment, 0" - 6" opening. -- 38" - 32" Conveyor height passline with MITUTOYO LED readout, conveyor belt feed. -- 5 HP Variable feed speed from 20 - 60 FPM, smooth rubber conveyor belt. -- Infeed & outfeed spring loaded holddown shoes, infeed emergency stop bar, anti-kickback fingers on infeed. -- Disc brakes on sanding head motors, 18" infeed load area, and motor load meters on sanding heads.

--at Auction, Seller Loading, (2) 75HP Motors, Built to Last!-- TIMESAVERS 352 HDA 51" 2-Head Abrasive Planer/Sander 2-Head, 51" width cap. Heavy Duty Sander. - 1st Head: Smooth steel contact roll, 11-1/2" dia., 75 HP motor. - 2nd Head: Spiral Grooved hard rubber contact roll (11-1/2" dia.) , 75 HP motor; 52" x 103" abrasive belts (6,300 & 4,300 SFPM) with POSI-TRAK electronic tracking. Equipped with: - Heavy-Duty solid rubber (no vacuum holddown) feed belt for Heavy-Duty operation. - Motorized part thickness adjustment, 0" - 6" opening. - 38" - 32" Conveyor height passline with MITUTOYO LED readout, conveyor belt feed. - 5 HP Variable feed speed from 20 - 60 FPM, smooth rubber conveyor belt. - Infeed & outfeed spring loaded holddown shoes, infeed emergency stop bar, anti-kickback fingers on infeed. - Disc brakes on sanding head motors, 18" infeed load area, and motor load meters on sanding heads.

TIMESAVERS 2321-23-21 Planer Sander 2 Heads2-Head, 36" width cap.Specifications: -- 1st Head: 6" Dia. Helical head with (6) spirals of 4-sided carbide inserts, 25 HP motor. -- 2nd Head: Combination head with 5-1/2" dia. contact roll and 2-1/2" wide finishing platen, 20 HP motor, sanding head with 37" x 75" Abrasive belt with "POSI-TRAK" electronic tracking. -- Dial indicators for height adjustments, -- Conveyor belt feed with variable feed speed 20 - 45 FPM, automatic conveyor belt tracking. -- Anti-kick back fingers on infeed; planer head with sectional infeed shoe and double holddown rolls on outfeed, double infeed and outfeed rubber covered holddown rolls on sanding head. -- Motorized part thickness adjustment 0" - 5" with mechanical digital readout; -- Minimum part length 15"; Pass line height 33"-38". Complete with: -- Controls mounted on belt loading side, air activated caliper disc brakes on all heads, load meters for each head and 14" infeed loading area. -- Dust extraction 3,500 CFM, Compressed air usage: 3 CFM @ 90 PSI, -- Total load amps at 230 Volts - 145 Amps.

TiMESAVERS 237-KA IC Planer Sander 2-HEADs (2) Heads Planer Sander Combination, 37" width capacity.Head Configuration: -- 1st Head: 7" Dia. Helical "Quiet Cut" planer head with (6) spirals of 4-sided carbide inserts with 15ø rake angle, head turns @ 3,200 RPM, head adjustment with dial indicator readout, 30 HP motor. -- 2nd Head: Combination Sanding head with 6" dia. contact roll (60 to 65 duro.) and 2-1/2" wide finishing platen, 25 HP motor; sanding head with 37" x 75" abrasive belt with "POSI-TRAK" electronic tracking.Feed System: -- Variable feed speed 15 - 45 FPM, automatic conveyor belt tracking, 3-ply rough top conveyor belt. -- Anti-kickback fingers on infeed, air loaded sectional shoe with dial indicator adjustment and double grooved pinch roll on infeed of knife head. -- Infeed & outfeed pinch rolls on sanding head, air activated caliper disc brakes on all heads. -- Motorized part thickness adjustment 0" - 6" with digital readout.Complete with: -- Controls mounted on belt loading side, main motor fuse protection on both heads, load meters for each head, "over thick" shut-off system and 24" infeed conveyor extension.

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

TIMESAVERS 2321-23-1 Wide Belt Sander, (2) Heads37" Width capacity, Drum and Combination Drum/Platen HeadHead Configuration:1st Head: Rubber contact roll, 25 HP motor (8"; diameter 70 shore rubber grooved contact roller)2nd Head: Combination head with a rubber covered contact roll 5-1/2" dia. and 2-1/2" wide polishing platen Specifications: -- 37" x 75" Abrasive belts. -- "Posi-Trak" electronic tracking & pneumatic tensioning. -- 15 - 45 FPM Variable feed speed with inverter control. -- Automatic conveyor belt tracking. -- Double infeed & outfeed spring loaded holddown rolls. -- 0" - 5" Max. motorized part thickness opening with automatic part thickness set-up, -- Air operated disc brakes and Motor load meters, -- 14" Infeed conveyor area, and infeed emergency stop bar.Equipped with & Features -- Quick release outboard support. -- Four bed jacks. -- Digital thickness readout. -- Centralized control panel.

---In Auction---Good Condition---Heavy-Duty--- TIMESAVERS 343-1 43" W Single-Head Abrasive Planer Specifications: - Thickness cap. 0 - 6". - Feed speeds 20 to 60 FPM. Equipped with: - 11-1/2" Dia. Smooth steel contact roll, with 100 HP Motor with Brake. - Double 2-3/4" infeed & outfeed hold-down rolls. - 43" x 75" Abrasive belt, with Electronic tracking, Automatic self-centering system, & Pneumatic belt tensioning. - Hydraulic feed, with 5 HP Hydraulic unit. - Motor load meter. - Safety bar stop. Complete with: - Owners Manual. Details, Photos, Bidding: https://exfactoryauctions.com/Detail/AP-232006/event/A051324$1

Reconditioned Torit 156RF10 baghouse

Dust Collection System

TORREDA TORMADEX S.A. PA-1200 Hydraulic Wood Turning Back Knife Lathe:Nicely equipped Spanish lathe with dual hydraulic tracers for making quick work of all your demanding woodturning production runs! ... Great for turning baseball bats!Specifications: -- 47" Max. between centers, 9-7/8" max. dia. without traveling steady. -- 3-1/3" Max. dia. through steady rest (larger dia. of 6.2" cap. OPTIONAL); -- High speed automatic loading, feeder accepts pieces up to 4" square. -- 4 HP Motor with (4) turning speeds, 1,200, 2,800, 3,500, and 4,550 RPM. -- (2) HIDRO "T-75" hydraulic reproducing heads with 3" stroke. -- (2) Top mounted hydraulic knives for tenon or pattern cutting (accepts form tools up to 3" wide). -- 2 HP Hydraulic pump motor with (3) carriage feed speeds. -- Features: Pressure sensitive Hydraulic tailstock with Pressure Regulating Valve needed for small, slender turnings to avoid buckling. Pre-rounding tool in front of travelling steady rest. -- Includes: Safety guard, tooling with several roughing and finishing knives.

Travaini TRO – 035S – 1A High Efficiency Liquid Ring Vacuum PumpNominal Capacity ACFM: 35Motor HP: 3Maximum End Vacuum in Hg: 26Approximate Dimensions (in.) L x W x H: 38 x 17 x 40Approximate Weight (lbs.): 340Hours of Operation: ONLY 3,835 (has been in storage most of its life)Needs two seals and glass on one gauge replaced, which seller will have done prior to shipping unit.Manual and other technical information are available upon request.Travaini TRO – 035S – 1A High Efficiency Liquid Ring Vacuum Pump

TRAVAINI TRO 501-1A-200V "40 HP VACUUM PUMP (LIQUID RING) 11,969 Hours:40 HP Travaini liquid ring, single stage vacuum pump "TRSC 100-700/C/F". Nominal capacity 500 ACFM @ 20" HgV; max Vacuum 27" HgV. -- Pump materialsInclude cast iron housing, ductile iron impeller and stain less steel shaft. Shaft seals are carbon face with viton elastomers. -- 40 HP:200 Volt,3-Phase, 60 Hz, TEFC monoblock assembly for direct drive, no field alignment needed. -- Sealing fluid re-circulating system includesReservoir of carbon steel with fluid level guage and drain, high efficiency discharge separator and over sized heat exchanger. -- High temp switchTo protect against over temp operation. -- Suction line accessories includeInlet check valve, vacuum guage (0 - 30" HgV), inlet filter assembly, manual unloader valve and vacuum relief valve. -- Heat exchangerIs air cooler type made from aluminium and extended surface fins. -- Electrical controls include:Starter/overload reset, pump running light, hour meter, hi-temp light and terminal blocks, all mounted in a NEMA 12 cabinet..

Tri State Machinery Straight Line Rip Saw S/N 4.5.74-72

Slab surfacers are designed for planing and sanding any large surfaces such as, but not limited to, table tops, countertops, fireplace mantels, and timbers and are exactly the same except the width. the SS-96 can be used on the 96” ground bed track and planes up to 96” wide surfaces. Both come with 35HP gas Briggs VanGuard engine that powers a direct-drive double hydraulic pump to power the machine. This is a rugged heavy duty machine for the serious woodworker. Comes standard with cutter head and an extra set of carbide inserts and sanding head with 10 pieces of sandpaper. Can also be used on concrete slab track if customer builds their own slab holding and clamping table. The dust collection blower kit will increase the production of these machines. Does not include track or power feed roller chains.

This slab surfacer is the same as GSS-70 gas engine powered surfacer, except they are powered by a 30HP 3-phase techtop electric motor available in 460 or 230 volt. Comes standard with start-stop switch to mount on surfacer, 50’ of wire between motor, and soft start mounted in a safety disconnect enclosure. The dust collection kit will increase production of these machines. There is no price difference between 460 & 230 volt. Does not include track or power feed roller chains.