Boring Machines For Sale

Ironwood BR23 Boring Machine 230V/3PH

J & P MACHINES - DH 2N, ...Double Hinge Drilling & InsertingDouble Drilling & Hinge Inserting Machine.Features: -- Fast setup from small to large doors. -- User-friendly movable head, which is easy to move to the preset stops. -- Pneumatic lock allows drilling at any distance. -- Quick-change hopper magazines with a loading capacity of (35) hinges. -- Insertion slide with UHMW non-wearing plastic. -- Creates chip-free bores on melamine and other sensitive materials by drilling from below. -- Boring heads with hardened gears and spindles. -- Linear bearings on slides for up & down movement. -- No tools required for precision depth adjustments. -- Double safety controls with: Metal detectors and photo eye prevent the boring unit from cycling again into the previously installed hinge. -- Dust extraction hoods with 4″ dia. -- Min. closing distance between heads is 7″ (180 mm). -- Max. opening distance is 60″ (1,520 mm); other sizes available upon request. -- PLC Control and proximity sensors. -- Emergency cord switch.Specifications: -- 2 HP - 3,600 RPM, 440 V, 3-Phase motors. -- Cycle time approx. (4) Sec. -- Compressed air 90 PSI. -- Weighs approximately 600 kG -- Dim.: 80″ L x 32″ W x 50″ H.

LAGUNA BM23E-2 ... Double Row Line Borer(2) 23-Spindle heads on 32 mm centers, (2) 3 HP motors, drills vertically from bottom.Specifications: -- Distance between first and last spindle 851 mm (33.50"). -- Spacing between zero and max. on the first head 0 - 4". Min. distance between two heads 7.25". Max. boring line spacing to the second head 24". -- 2,800 RPM spindle speed; collets accept 10 mm shank bits. -- Heavy overhead material holddown system with (4) pneumatic material clamps. -- (2) independent air throttles to control the drill-heads upstroke speed.Complete with: -- "Set screw" drill adapters, "quick set" system for depth of drilling. -- Extension fence with (3) flip-stops and foot pedal control.

1- 5mm Boring and Inserting Unit with Vibratory Hopper 1-8mm Boring and Inserting Unit with Vibratory Hopper Power: 208v-220v, 3 Phase, 30 Amps 96? Maximum Work Zone 4 zone stops 3-Axis Control For Positioning Weight 6,000lbs Solid One-Piece Welded Tubular Steel Frame Footprint (L x W x H): 135? x 45? x 82? Shipping Dimensions (L x W x H): 42.3? x 49? x 43? Shipping Weight: 7500 lbs

---In Auction---NO RESERVE--- LOBO BH-26 Multi-Spindle Horizontal/Vertical Boring Machine Specifications: - Table size 17-3/4” x 73-1/4”. Equipped with: - (10) Horizontal spindles with (2) 3 HP - 1,720 Motors, (4) Vertical spindles. - (4) 3-1/4” Dia. Vertical pneumatic hold-downs. - Pedestal & Foot pedal controls. Details, Photos, Videos, Bidding: https://exfactoryauctions.com/Detail/BV-230383/event/A051324$1

dowel machine made by Loser Machine type: AA 220 Machine # 1116 Bi 80 Voltage: 440 Hertz 60 Removed from service November 2020. for dowel diameter approx. 6-13 mm smallest cutting length 15 mm The dowel length is adjustable between 20 and 150 mm and is determined by means of an adjustment scale. The chamfer thickness can be set as required.

MAGGI SYSTEM 35 CONSTRUCTION/LINE BORINGAdjustable 35-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 23 Construction Hole Boring Machine Adjustable 23-spindle boring head on 32 mm centersSpecifications: -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with a mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 38" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Dust Outlet: 3".Net weight: 630 Lbs; Dimensions: 51.7" x 37.8" x 50" Tall; Crated Dimensions: 44" x 38" x 42" Tall; Crated Weight: 664 lbs.Available in single phase ... Add $ 600.00

MAGGI SYSTEM 29 CONSTRUCTION/LINE BORERAdjustable 29-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 46 Double Head Line Boring Machine:Heavy Double Head Line Borer with (2) 23-spindle heads; 32 mm spindle spacing.Specifications: -- Drilling from the bottom up and with 5-1/8" - 25-19/32" distance between rows. -- Drilling vertically from the bottom allows the chips to drop down falling out of the holes. -- Drilling depth of up to 2-1/16" (55 mm) max., takes only seconds to set. -- (2) 2 HP - 3,500 RPM Commercial Duty motors; spindles with steel gears & high quality bearings. -- Easy repetition by (2) air index pins for continuous line drilling, left and right roller track supports extend up to 400 mm (15-3/4") for larger panels.Features and Includes: -- 120" Back fence with (4) repeat "flip" stops; includes 27-3/4" (704 mm) fence for quick positioning of flip stops. -- (6) Pneumatic holddowns to automatically actuate when the drill cycle begins. -- (46) "Quick Change" chucks for easy tool change. -- Magnetic motor controls and 1/4" air regulator with filter and oiler; 100 PSI required air pressure.

MAGGI SYSTEM 21 PRESTIGE Construction & Line BorerAdjustable 21-spindle boring head on 32 mm centers with position indicator.Specifications: -- Stops in 0° and 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with magnifying glass viewer. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (2) repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks.OPTIONAL: -- 230V Single Phase add $600.00 --29900100 Stop Reference Pin for Line Boring $195.00 -- 26000069 Set of Reference Fences for 45 and 90 degrees $195.00 -- 36000061 Additional Quick Change Bit Adaptor $27.50 ea -- 29971019 Additional Holddown Cylinder Assembly $395.00 ea -- Hinge Boring Head (Specify Blum, Grass, Salice, or Hettich) $695.00 -- TDBSE5705LH or RH 5mm x 57mm LH OR RH Brad Point $9.85 ea -- TDBSE5708LH or RH 8mm x 57mm LH OR RH Brad Point $11.95 ea -- TDBSEHB5735LH or RH 35mm x 57mm LH OR RH Hinge Point $26.80 ea -- FREIGHT TO ANYWHERE IN THE CONTINENTAL USA $ 300.00

MAGGI GT 800 CNC MACHINING CENTER (P TO P): -- Specifications:Flexible "Vertical/Horizontal" Boring & Grooving Machining Center that can reach movement speeds of 82 FPM (25 ) in "X" & "Y" axis & 49 FPM (15 MPM) in "Z" axis with total safety. -- Working field: Maximum part size for "X" axis is virtually Infinite, "Y" axis 31.5" (800 mm), max. part thickness 2" (50 mm). Minimum part size for "X" axis is 9.84" (250 mm), "Y" axis 3.93" (100 mm), min. part thickness of 0.39" (810mm);Panel End/Edge Reader for perfect panel positioning/placement. -- Boring unit:Suitable for drilling on face and sides of panels, including holes for dowels, hinges, KD Fittings and shelf holes(1) Boring block with 3 HP (2.2 kW) - 3,400 RPM motor; (7) vertical spindles with (4) spindles in "X" axis & (3) spindles in "Y" axis.(1) Horizontal spindles with (1+1) in "X" axis for top & bottom edge boring(1) "X" axis grooving saw, 5,000 RPM, max 100 mm saw blade diameter.Boring Capacity 0 to 800 mm (31.5") with any spindle -- Operator & Machine Control:PC front end with extremely intuitive user interface with up to 1,000 program storage space; Real-time multitask processing;12" TFT "Touch-Screen "Monitor; soft-touch keypad & industrial mouse; RS-232 Serial ports, USB ports; (1) CD ROM drive. -- Complete with:Pneumatic part clamping roller devices; auto lubrication system; sound enclosure & safety devices. -- Actual Model is MAGGI GT 800

MAGGI SYSTEM 46 Double Row Line Borer(2) 23-Spindle heads on 32 mm centers, drills from bottom up;Specifications: -- (2) 1.5 HP - 2,800 RPM motors, 5" min. and 25-19/32" max. working width between heads, 4" drilling stroke, drills vertically from bottom so chips fall out of holes. -- Heavy overhead material holddown system with (6) pneumatic material clamps. -- 16" Retractable infeed and outfeed support roller system for long panels. Complete with: -- "Quick change" drill adapters, patented "quick set" system for depth of drilling. -- 120" Extension fence with (4) flip-stops, reference pin for continuous line drilling, and foot pedal control.

MASTERWOOD PROJECT 313 CNC MACHINING CENTER (W/ACT/BORING): -- Specifications:Working Capacity:"X" Axis 3,080 mm (121"), "Y" axis 1,100 mm (43") width; -- Positioning Speed:Programming speed in X-axis 197 FPM (60 MPM), Y-axis 162 FPM (49 MPM), Z-axis 58 FPM (18 MPM). -- Boring unit:(13) independent vertical spindles, (9) in X-axis, (5) in Y-axis; (4) horizontal spindles with (1 + 1) in X-axis for edge boring in the left- & right-hand panel edges. -- Machining:(1) 7.5 HP (5.6 kW) high speed router (1,000 - 24,000 RPM) by frequency inverter; 1.5 HP (1.1 kW), 6,000 RPM grooving saw with manual rotation for X-axis or Y-axis; -- Work Table: (6) moveable support rails with (2) vacuum cups ea., double zero settings, (6) pneumatic backstops and (2) pneumatic side stops creating (2) working zones. -- Operator & Machine Control:TECNOSUD "K68800" Microprocessor control for (3) axis, lineal, circular, and helical interpolation. Equipped with 14" color video graphic monitor, keyboard for data entry, 1.44 MB floppy disk drive, 64K RAM, RS-232 for possible connection to office PC, all mounted in separate free-standing control cabinet; features to run CPL/Parametric "TRIG" programming and "Spline" CAD/CAM. -- Complete with: Dual zone vacuum pump. Ontario Hydro approved electrics. -- Actual Model is MASTERWOOD PROJECT 313

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut. -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

MORBIDELLI PLANET HP CNC MACHINING CENTER (W/EDGEBANDING): -- Specifications:"Bridge Gantry" TWIN TABLE Routing & Edgebanding Center with (2) independent working tables: (2) Independent routing units mounted to the back side of the support beam.1) Independent edgebanding unit mounted to the front side of the support beam; it is possible under some circumstances for all (3) units to work simultaneously & totally independent of each other. -- Working Fields:Working field with both tables locked together; "X" axis 157.4" (4,000 mm); "Y" axis 70.8" (1,800 mm); "Z" axis stroke 15.7" (400 mm); max. material thickness when machining 6.6" (170 mm).Working field for each individual table: "X" Axis 63" (1,600 mm); "Y" axis 70.8" (1,800 mm); "Z" axis stroke 15.7" (400 mm); max. material thickness when machining 6.6" (170 mm). -- Edgebanding:Minimum internal radius when edgebanding 1.18" (30 mm) & minimum external radius when edge banding 0.39" (10 mm), depending on the type of banding material; max. material height when edgebanding 2.36" (60 mm). -- Positioning Speed:"X" & "Y" Axes 492 FPM (150 MPM); "Z" axis 82 FPM (25 MPM); "X" & "Y" axes uses a helical Rack & Pinion system, "Z" axis uses precision ball screws.All axes movement is on precision linear guides & ways & controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system. -- Worktables:(2) Independent Worktables with: (8) Tubeless support rails; (4) rails with (4) pneumatic lifters each table; (2) vacuum pods per rail; manual positioning of rails & vacuum pods via LED positioning indicators & according to the parts processing requirements from the NC Control.(4) Pneumatic backstops; (2) pneumatic side stops & (2) pneumatic centerstops per worktable. -- Boring Units:(2) Independent boring units, each with: (1) 4 HP (3 kW) motor, 4,500/6,000 RPM; each head with (18) independent vertical boring spindles; (14) spindles in "X" axis & (4) spindles in "Y" axis (one shared spindle).Each head with: (6) Horizontal spindles, (2 + 2) in "X" axis & (1 + 1) in "Y" axis. -- Routing Units:(2) Independent routing units, each unit with (1) 10 HP (7.5 kW) air cooled electro-spindles with "HSK 63" adaptors; programmable from 1,500 - 18,000 RPM;Each spindle with NC controlled "C" axis for 360° horizontal processing.(24) Automatic Tool Changers with: (1) 12-Position ATC toolholder mounted at each head for "on the fly" ATC (max. dia. tooling 180 mm when leaving open space on either side of the tool). -- The boring & routing heads are mounted to back side of the central support beam. -- Edgebanding Unit:(1) Edgebanding unit mounted to the front side of the support beam; NC controlled 360° operation for straight or contour edges with hot melt applicator and pressure rollers swiveling via a "C" axis;300 mm min. Part length for radius edgebanding; 0.4 - 3 mm PVC thickness and 0.4 - 2 mm veneer thickness.(1) 3-Coil magazine for automatic coil material feeding

MORBIDELLI AUTHOR 800 CNC MACHINING CENTER (W/ATC/BORING/ "C" AXIS): -- Specifications: Working Capacity: "X" Axis is 225" (6,500 mm); "Y" axis 61" (1,550 mm); "Z" axis stroke is 11" (280 mm); max. material thickness is 5.1" (130 mm). -- Positioning Speed"X" Axis 196 FPM (60 MPM); "Y" axis 131 FPM (40 MPM); "Z" axis 74 FPM (22.5 MPM); YASKAWA AC Servo motors in all (3) axes. -- Worktable:(6) Vacuum hold-down support rails; (3) vacuum pods per support; rails have pneumatic locking control; support rails slide on guides in the "X" axis for manual positioning.(6) Lifting bars to assist in loading/unloading heavy panels; (6) pop-up backstops, (2) pop-up side stops, (2) pop-up center stops. -- Boring Head:5 HP (3 kW) Motor, variable speed from 4,500 - 6,000 RPM; (18) Independent vertical boring spindles: (9) Spindles in "X" axis & (9) spindles in "Y" axis.(8) Horizontal spindles with: (2 + 2) Horizontal spindles in "X" axis & (2 + 2) in "Y" axis.(1) "X" Axis grooving saw for max. 120 mm dia. blade. -- Machining Unit(1) Vertically mounted 14 HP (8.5 kW) electrospindle router with ISO 30 adaptor; inverter driven 1,000 - 18,000 RPM.(1) NC Controlled "C" axis for 360° horizontal processing.(32) Total ATC positions with: (1) 10-Position (RAPID 10) plate type ATC with "on-the-fly" ATC + (1) 22-position ATC rack mounted at the back of the machine. -- Operator & Machine Control: PC Front-End with: "NUM 1040M" + Windows Operating System; 10" VGA color monitor, ergonomic keyboard & mouse.1.2GB Hard drive, 1.44 MB disk drive; (2) serial ports: RS-232 & RS-242; all mounted in separate dustfree control cabinet.NUM 1040-OPERATOR Interface offers incredible list of functions from: (a) Autodiagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria.Programs can be transferred via diskette or downloading by wire is possible. -- Complete with: Autotransformer; (1) 100 cbm/Hr Vacuum Pump; safety "Bump Stop". -- Actual Model is MORBIDELLI - AUTHOR 800 .

MORBIDELLI U 550 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Worktable area "X" axis 126" (3,200 mm); "Y" axis 51" (1,300 mm),;"Z" axis stroke 4.52" (115 mm); max. material thickness 3.1" (80 mm). -- Positioning Speed:"X" & "Y" Axes are192 FPM (58 MPM); "Z" axis 80 FPM (24 MPM). -- Worktable:(8) Adjustable panel supports with (3) vacuum pods per support.(8) Pneumatic backstops, (2) pneumatic side stops & (2) pneumatic center stops; (2) independent work zones. -- Boring Unit:(1) 4 HP (3 kW) - 4,000 RPM Motor; (29) independent vertical spindles at 32 mm centers with (14) vertical spindles in "X" axis & (15) vertical spindles in "Y" axis.(6) Horizontal spindles with (3 + 3) in the "X" axis. -- Machining:(2) 9 HP (6.7 kW) Routers with: ISO 30 Adaptors; variable speed from 12,000 - 18,000 RPM.(1) 5-Position tool racks mounted on the LH side of the machine base for ATC. -- Operator & Machine Control:Separate control cabinet with: "TRIA 7500" CNC 32-Bit multiprocessor (100% MS/DOS compatible), 512 KB user RAM.14" VGA Color monitor; ergonomic extended keypad with (18) function keys; 1.44 MB floppy disk drive & (2) RS 232 & (1) RS 242 serial ports. -- Complete with:(1) 100 cbm/Hr Vacuum Pump; working head safety enclosure; emergency stop rope. -- Actual Model is: MORBIDELLI - U 550.

MORBIDELLI U 550 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Worktable area: "X" Axis 126" (3,200 mm); "Y" axis 51" (1,300 mm); "Z" axis stroke 4.52" (115 mm); max. material thickness 3.1" (80 mm). -- Positioning Speed:"X" & "Y" Axis are 192 FPM (58 MPM); "Z" axis 80 FPM (24 MPM). -- Worktable:(8) Adjustable panel supports with (3) vacuum pods per support.(8) Pneumatic backstops; (2) pneumatic side stops & (2) pneumatic center stops; (2) independent work zones. -- Boring Unit:(1) 4 HP (3 kW) - 4,000 RPM Motor; (29) independent vertical spindles at 32 mm centers with: (14) Vertical spindles in "X" axis & (15) vertical spindles in "Y" axis.(6) Horizontal spindles with (3 + 3) in the "X" axis. -- Machining:(2) 9 HP (6.7 kW) Routers with: ISO 30 Adaptors; variable speed from 12,000 - 18,000 RPM.(1) 5-Position tool rack mounted on the LH side of the machine base for ATC. -- Operator & Machine Control:Separate control cabinet with: "TRIA 7500" CNC 32-Bit multiprocessor (100% MS/DOS compatible); 512 KB user RAM,14" VGA Color monitor; ergonomic extended keypad with (18) function keys; 1.44 MB floppy disk drive & (2) RS 232 & (1) RS 242 serial ports. -- Complete with:(1) 100 cbm/Hr Vacuum Pump; working head safety enclosure; emergency stop rope. -- Actual Model is: MORBIDELLI - U 550.

MORBIDELLI AUTHOR 504 R CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Cap. "X" Axis 139-3/8" (3,540 mm); "Y" axis 48-3/8" (1,230 mm) for routing & 39.6" (1,008 mm) for boring; "Z" axis 3.1" (80 mm). -- Positioning Speed:"X" Axis 213 FPM; "Y" axis 131 FPM; "Z" axis is 65 FPM. -- Worktable:(8) Adjustable panel supports each with: (3) Vacuum pods; worktable setup for (2) independent working areas. -- Boring Unit:(29) Independent vertical boring spindles forming a T-configuration with: (15) Spindles on the "X" axis and (14) spindles on the "Y" axis.A total of (8) horizontal spindles with: (3 + 3) on "X" Axis; (1 + 1) on "Y" axis. -- Machining:(1) 9 HP (7 kW) Vertically mounted router; inverter driven (FUJI) at 12,000 - 18,000 RPM.(1) 8-Position ATC for Automatic Tool Changer. -- Operator & Machine Control:"NUM CN" Loaded onto a HP, PC Based Controller mounted in separate control cabinet.15" VGA Color monitor and ergonomic keypad. Remote Control Pendant: Allows the operator to move around and still control all the axis movements, speed, and emergency stop.Includes: USB Ports; (2) serial ports RS-232 & RS-242 (requires no 3rd party CAD system for downloading programs). XILOG-PLUS OPERATOR Interface: Offers incredible list of: Functions from (a) Auto. diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria; programs can be transferred via diskette or downloaded by wire. Equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator, mirror imaging, and repeat imaging. -- Complete with:(1) 100 cbm/Hr Vacuum Pump. -- Actual model is: MORBIDELLI - Author 504 .