Woodworking Equipment For Sale

CASADEI FLEXA 37 M-5 EDGEBANDER (W/PREMILL & CORNER ROUNDING): -- SpecificationsEdge material thickness 0.4 - 3 mm coil & 6 mm (0.25") strips. Min./max. panel thickness 8 - 60 mm (0.31 - 2.36"). - Min. panel width 80 mm (3.1") and 140 mm (5-1/2") min. length.Equipped with: -- Pre-milling Unit: (2) x 3 HP - 8,300 RPM High Frequency motors with counter-rotation. -- Automatic Coil & Strip Feed Magazine with: Heavy Duty 3 mm PVC cap. Guillotine. -- Gluing Unit: Teflon coated quick-change glue tank; approx. 10-minute heat-up time, programmable temperature control w/timer if machine idles to prevent glue overheating/burning. -- Side Pressure Unit: 3-Roll pressure unit w/1st roller power; driven via clutch with pneumatic in & out positioning; (2) idler rollers.Workstations: -- End Trimming Unit:Front & rear end trim, (2) x 0.3 HP - 12,000 RPM ea. motor with pneumatic tilting feature (0° - 15°) from the control panel. -- Top & Bottom Trimming Unit: Combination flush/bevel/radius trimming (2) x 0.65 HP - 12,000 RPM ea. motor; tilts from 0° - 25°. Pneumatic 3-position presets programmable from the control panel. -- Corner Rounding Unit: 2-Motor Corner Rounding unit for leading & trailing edges. -- Edge Scraping Unit: Top & Bottom PVC Scraper for up to 3 mm radius; complete with 3 mm scrape shaving collection box. - Programmable, pneumatic exclusion on/off. -- Buffing Unit:Top & bottom buffing unit; (2) x 0.2 HP - 1,400 RPM ea. motor each; tilting range 8°.Controller: -- "MEGA 300 TS"Sequential motor start, 12" color touch screen, up to (100) programs capacity; maintenance alarms & machine use statistics.Complete with:&#9679 Chain feed motor; feed speed 11 MPM (36 FPM) &#9679 (2) Rows of upper pressure wheels in hold-down beam &#9679 Adjustable material support Outrigger &#9679 Sound & Safety Hoods &#9679 Tooling: (1) Used set of tooling in the machine, cutter-heads are combination flush/bevel/radius &#9679 Original Factory Machine documentation. -- Actual Model is: CADADEI FLEXA 37 M-5.

CASADEI ALA 23 EDGEBANDER WITH CORNER ROUNDING0.4 - 15 mm (1/2") Edge cap., panel thickness 10 to 60 mm (.39" to 2.36"). Minimum panel length 120 mm (4-3/4") and 55 mm (2-1/8") minimum width. Equipped with: -- Quick heat-up glue system,(approx. 12 Min) 1.5 Kg glue pot capacity. -- Pressure roll section with (3) rolls - one driven. Pneumatic cut-off guillotine.Workstations: -- Double end trim, chamfers 0° - 15° -- Top & bottom flush/radius trim, bevels 0° - 15°. -- Double motor Corner Rounding station -- Top & bottom scraping for 3 mm radius, -- Top & bottom buffing (0.25 HP - 2,800 RPM motors).NOTE: Seller states that the buffing unit appears to have an electrical issue and is not currently being used by the current owner";Actual Model: "ALA 23 R"

Owner has changed gears and is no longer needing equipment. Great working condition and ready to be shipped.

2016 Casadei Flexa 47 Edgebander 230 V/3 PH

CASADEI RANGER MC 3012 CNC MACHINING CENTER (VERTICAL, W/ATC): -- Specifications: Flexible "Vertical" Machining Center reaches movement speeds of 131 FPM (40 MPM) in X-axis, 98 FPM (30 MPM) in Y-axis, & 66 FPM (20 MPM) in Z-axis. -- Work Capacity:Max. part size for: X-Axis is 118" (3,000 mm); Y-axis 47.2" (1,200 mm); max. part thickness 3.9" (100 mm). -- Worktable:Vertical Phenolic MATRIX Grid table with: (5) Adjustable "tubeless" pneumatic locking panel supports, (3) adjustable vacuum pods per support.Pop Up Pneumatic backstops & pneumatic side stops for material positioning on the LH or RH side of the machine for mirror imaging. -- Boring Unit:(1) Boring block with: 2.25 HP (1.7 kW) - 4,000 RPM Motor.(10) Vertical spindles with: (5) Spindles in X-axis & (5) spindles in Y-axis.(6) Horizontal spindles with (2 + 2) in X-axis & (1 + 1) horizontal spindle in Y-axis.(1) X-Axis grooving saw: 5,000 RPM; for max. 120 mm dia. saw blade. -- Machining:(1) 6.7 HP (5 kW) Router with: ISO 30 Adaptor, variable speed from 1,000 - 18,000 RPM.(1) 5-Position ATC rack mounted on the side of the working unit. -- Operator & Machine Control:CNi PC Front End + Windows "XP" Operating System; 17" LCD, TFT monitor; international keyboard, soft touch keypad & industrial mouse; RS-232 Serial ports, USB ports; Ethernet connection.Real-time multitask processing; programs can be transferred via USB or downloading by wire is possible. -- Complete with:(1) 100 CBM/Hr BECKER Vacuum Pump; sound enclosure & perimeter safety devices. -- Actual Model is: CASADEI - RANGER MC 3012.

Panel height: 0.3 – 2.36” Coil edge thickness: .12” Strip edge thickness: .015 – .24” Max Overhang Total Top and Bottom: 0.16” Min panel width (min length of 8 ¼”: 3.54” Min panel length (min width of 3-15/16?): 5.5” Feed Speed: 33 f/min Glue Tank GP-200 Power: 2.4 kW Glue Capacity: 3.3 lbs End Trimming Unit IK/200 (each): .3 HP Cutting Speed: 12,000 RPM Blade Tilt: 0-15 deg. Top and Bottom Trimming TT/K Motor (each): .4 HP Cutting Speed: 12,000 RPM Shipping Footprint: 13' x 4' x 5' Weight: 2500 lbs Equipped With: – Pre-Milling Unit – Glue Applicator and Pressure Rollers – Edgebanding Trimming Guillotine – End Trim With 2 Tiltable Motors 0-15 deg. – Top and Bottom Trimming via 2 Motors – Profile/ Radius Scrape – Glue Scraping – Buffing

CASADEI FLEXA 37 RMAT-7 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: 0.4 mm - 3 mm Max. edge thickness cap., (0.5 mm to 3 mm for solid strip edge thickness). 8 mm - 50 mm (0.3" - 1.97") panel thickness cap. (when edgebanding 3 mm PVC max. thickness is 40 mm). -- Minimum panel dimensions 80 mm wide x 140 mm long (3.15" x 5.5"). -- Automatic feed of coil banding and semi-automatic strip fed magazine (strips 1- 3 mm max.) with 3 mm PVC cap. guillotine.Equipped with: -- Teflon coated glue pot w/fast (10 - 12) Min heat-up time; 1 Kg. capacity. -- Guillotine to cut edgebanding in coils up to 3 mm thick. -- Pneumatically controlled pressure section with (3) pressure rollers; 1st drive, (2) idle.Workstations: -- Cutting group moves on rounded ways made of hardened steel, to guarantee high precision and reliability; cutting movement from the top of the panel is synchronized by the PLC control. -- Pre milling unit with 3 HP - 8,300 RPM High Frequency motors. -- Double motor end trimming saw unit with (2) 0.25 HP - 12,000 RPM High Frequency motor. -- Top & Bottom Trim station with (2) 0.45 HP - 12,000 RPM High Frequency motors; unit features adjustable copying on vertical & horizontal floating movements, adjustable cutter-head position by mechanical digital readouts, quick release (electrical & mechanical). -- Single motor Corner Round Unit (set up for 3mm). -- Top & Bottom 3 mm scrape station -- Top & Bottom Buffing unit with (2) 0.20 HP - 1,400 RPM motors. -- Fixed feed speed 23 FPM. -- Actual Model is CASADEI FLEXA 37 RMAT-7

Carolina Sliding Tabil Saw ready to ship

CASTALY MAX370P EDGEBANDER WITH PRE-MILLING AND CORNER ROUNDING0.4 - 3 mm Edge thickness, panel thickness 8~45 mm, min. panel width 100 mm (4″), min. panel length 170 mm (6.7″).Equipped with: -- Quick melt Teflon coated glue pot 2.5 Lbs capacity. Two spring-loaded pressure rollers (One driven, one idling).Automatic coil feed PVC/ABS up to 3mm thick, pneumatically operated guillotine. Laminate strip material can be hand-fed.PLC control system with LED display and keypadWork stations: -- Pre-Mill station with (2) 1.1 Kw 12,000 RPM trim motors 32 mm (1.25") max. material thickness. -- Single motor front and rear edge trim station. -- Top & bottom trim station with insert knife cutters for radius trimming & bevel trimming. -- Corner Rounding Unit for leading and trailing corners with (1) 0.5 HP (0.37 kW) - 12,000 RPM motor. -- Top & bottom scrape station 2 mm radius. -- Top & bottom buffing. -- Feed speed 29 FPM

There are (12) of these available. (2) are new in crates. (10) are being used. Available approx August 1 2023 Manufacturer specs: PRODUCT DESCRIPTION AT-Race 4' x 12' Face Frame Assembly Table The AT Race 4' x 12' Open-Back Face Frame Assembly Table features clamping arms that glide smoothly on an open beam. This allows assembly of larger face frames or other components with parts that extend beyond the top of the table. The redesigned quick-clamps feature place-and-stay movement – no need to lock them into place – and centered activation for easy clamping from either direction. The rigid steel arms, constructed out of Unistrut, will stand up to years of use, while the open back table gives you more work area and can handle oversize frames without taking up valuable shop space. Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. This assembly table is an essential addition to your inventory of professional woodworking production tools. When you are in need of premier woodworking tools and supplies, turn to Castle USA. We pride ourselves on providing our customers with the absolute best and highest quality tools, machinery, and accessories. Features and Benefits include: - Professional woodworking assembly table - Open back design: - Accepts oversized frames and other large assemblies - Maximizes work area - Dual Unistrut clamping arms with three adjustable air cylinders that hold work firmly for easy assembly and minimal sanding - 45 Degree, 1" laminated top for easy glue clean-up and less operator fatigue than horizontal clamping tables - Built-in driver holster keeps driver within easy reach for increased convenience and efficiency (driver sold separately) - Convenient integrated connection port for air-powered driver adjacent to driver holster - Left- and right-side fences allow two-person operation - Rigid and lightweight for easier handling and positioning Technical Specifications: - Unistrut rigid steel arms with redesigned quick-clamps - Driver sold separately - Assembly required - Footprint: 165"x43"x83" - Manufactured in the USA

MANUFACTURER SPECS: 2000 C.B. LEVIGATRICI 52" DUAL HEAD WIDE BELT SANDER. 1ST HEAD: 12" SPIRAL RUBBER ADJUSTABLE HEIGHT CONTACT DRUM. SECOND HEAD: DIGITAL PLATEN. VARIABLE SPEED EVERYTHING. LONG BELT LENGTH OF 103". OSCILLATING BELT BLOWERS. VARIABLE SPEED EVERYTHING. DIGITAL POSITIONING. 220 volt 3 phase. includes 18 spare belts…approximately half new, rest lightly used.

CEFLA PSP6 Six (6) Gun Automatic Molding SprayerThe machine was purchased to spray PVC extrusions but the client changed his requirements, so the machine was taken from service. The machine has less than 1 year of light use and is in very good condition.As with all sprayers, it will require some cleaning and we recommend replacing the fluid lines with new ones. The machine has two (2) Spray zones with (3) guns in each. Each zone has a separate circuit. This machine is manufactured in the USA at the CEFLA facility in Charlotte, NC. Specifications: -- Two (2) Circuits Three (3) plus Three (3) or Six (6) on a single circuit -- ATEX Drive Motor, Inverter Controlled -- In / Outfeed Belts with Rollers with protection sleeves inside the spray booth -- ATEX-rated sensor-controlled guy triggers, individual on/off for all guns with individual manual test triggers -- Manual Atomization Controls -- ATEX-rated door safety switches -- Control Panel with Color Touch Screen -- One (1) 2000 CFM Exhaust, Explosion Proof -- Stainless Steel internal construction -- Pull out the overspray collection cart with removable Teflon-coated collection trays for ease of cleanup and the possibility of recuperation of coating material -- Filter cabinet on the back of the machine with easily replaceable mesh filters.

Cefla Rotostain 2000

Cefla Prima Sprayer Infeed & Outfeed Conveyors Pumps & Guns Already disconnected and ready to load!

Complete Finishing Spray line 1300mm Wide with the following pieces. In feed Conveyor Sorbini panel cleaner Cefla UNO spray multiple circuits Conveyor Cefla 3 section vertical oven with boiler Out-feed conveyor all pumps and Guns

Cefla Sorbini T/20-3-STP Triple Head Print & UV Line (3) Print Head System (2) IR Ovens Available Immediately

Cefla Prima Sprayer Low usage Ready to ship!

---In Auction--- CEFLA PRIMA 1,300 mm (51.18") W Single-Arm Automatic Oscillating Spray Coating System, with (4) Spray Guns & (2) Pumps Specifications: For water or solvent-based coating of wood, plastic, glass, & metal. Feeds right-to-left. Working width 1300 mm (51.18"), Min. panel length 250 mm (9.84"). Max. panel thickness 60 mm (2.36"). Paper roll width 1520 mm (59.84"), Paper roll length: 2400 M (7,874'), Paper roll dia. 520 mm (20.47"). Conveyor speeds 1 - 3 MPM (3 - 10 FPM). Chamber size 11’ W x 6’ L x 3-1/2’ H. Equipped with: Heavy-duty spray arm, with (4) C.A. TECHNOLOGIES "BOBCAT "66-250" Automatic air assisted airless spray guns with Max. fluid pressure 2,500 PSI, (2) High pressure feeding circuits, & Electronically-controlled oscillation speed. 11’ L Disposable paper-covered vacuum belt conveyor, with 2-1/4” Dia. Infeed & Outfeed rollers on 4-3/8” Centers, & Vacuum unit. Automatic paper payoff & take-up system, with Unwinder with adjustable mechanical brake & Winder with Air motor. Automatic panel shape & panel detection system. Removable overspray tanks with Filters. Natural air inlet, with 2-Stage Large-surface dry filters. 4.6 kW (6 HP) High efficiency exhaust fan. Dual chamber lights. Control, with PLC, SCHNEIDER ELECTRIC "MAGELIS" Graphic Terminal with 6" Color LCD touchscreen, & Diagnostics. Complete with: Manual. (2) C.A. TECHNOLOGIES "C-20 70-1500" 2 GPM 20:1 Cart-Mounted Stainless Steel Fine Finish Pumps, Each with Fluid volume 2 GPM at 60 Cycles/Min, Max. fluid pressure 2,000 PSI, Max. air pressure 100 PSI, & 5 Gallon Siphon hose assembly. C.A. TECHNOLOGIES "54-405" 5 Gallon Pail-Mounted Stainless Steel Mixer. 60” W x 3’ L x 36” H Infeed & Outfeed Motorized Roller Conveyors, Each with 1-7/8” Dia. Coated rollers on 4” Centers & 1/4 HP - 1,700 RPM Motor. Details, Photos, Videos, Bidding: https://exfactoryauctions.com/Detail/FS-230114/event/A051324$1

CEHISA PRO-9 EDGEBANDER SINGLE PHASE ELECTRICAL!Single sided edgebander with end trim, top/bottom trimming, scraping and buffingSpecifications: -- 0.4 - 3 mm Edge thickness cap., -- Teflon coated glue pot system, -- Automatic magazine for strip & coil feed; Heavy Duty guillotine for up to 3 mm thick PVC, -- (2) roll pressure zone with (1) motorized and (1) idle roller. Workstations: -- Double motor end trim station (0.33 HP - 12,000 RPM motor ea ); -- Top & bottom flush/bevel trim, bevels 0° - 20° (0.45 HP motor ea.) -- Top & bottom PVC profile scraper for up to 3 mm radius. -- Last Station: Top & bottom buffing unit (0.75 HP motors). -- Electronic braking on trim motors; digital readout on top/bottom trim. -- Feed speed of 33 FPM & 1 HP feed drive. -- - Sound enclosure, -- Outboard panel support, -- Frequency converter, -- Digital readouts for trimmer adjustments, -- Sound enclosure

CEHISA PRO 10 .EDGEBANDER (W/PREMILL): -- Features: Pre-milling Station with: 2 x 1.5 kW (2.0 HP) 12,000 RPM motors; standard equipped with diamond cutters. Both spindles pneumatically controlled. -- Automatic Edge Magazine: For coiled material up to 3 mm thickness, strip feed magazine for up to 5 mm (3/16") solid wood banding. -- Quick Melt Glue System: 10 - 15 Min. heat up time, auto-temperature drop. Glue Tank is coated with nonstick material, quick change mechanism for easy maintenance and/or color change. -- Pressure Section: (1) Large dia. driven and (2) idle rollers. Digital readout and pneumatic positioning selectable from controller touchscreen. -- Edgebanding Workstations. End Trimming Station: Double motor front & rear, 2 x 0.35 kW (0.5 HP) - 12,000 RPM. -- Edge Trimming Station: Top & bottom flush/bevel/radius trimming, (2) 0.35 kW (0.5 HP) - 12,000 RPM motors, tiltable 0° - 20°, pneumatic exclusion from operator panel. -- Profile Scraping Unit: For thick PVC/ABS radius scraping, pneumatic in/out positioning from control panel with chip collection box. -- Flat Glue Scraper: To remove potential glue squeeze out. -- Buffing Unit: Top/Bottom, (2) 0.12 kW (1/8 HP) - 1,650 RPM motors, tilting horizontally and vertically. -- Controller: "Unitronics V350" Controller with color touchscreen, memory up to (20) programs. -- Equipped with: Feed Speed: 9 & 14 MPM (29 & 46 FPM). -- Power hold-down beam, workpiece support outrigger, safety & sound enclosure. -- Included Options:RIEPE non-stick Spray System. -- Actual Model is: CEHISA PRO 10