Woodworking Equipment For Sale

SCM DMC 90 RCS 135 2 Head 53 inch Wide Belt Sander 53" Width cap, Steel Drum, Combination HeadHead configuration1st Head: Steel Drum 36 HP Motor, 9" Diameter 2nd Head: Combination head 65 shore drum and solid wood platen, 30 HP Motor, 7" Dia. drumSpecifications: -- 54" x 103" Abrasive belts with electronic tracking. -- Shoe & Roller Holddowns. -- "Hydra 35" Computer controlled; set-up functions with a keypad and LCD screen. -- Conveyor belt feed with variable feed speed from 11 - 60 FPM; 6.4 HP feed drive. -- Vacuum conveyor bed with 7.5 HP Motor and suction fan. -- Automatic conveyor belt tensioning & tracking. -- Motorized part thickness opening with LED Readout; 1/8" - 4" max. opening; automatic part thickness set-up sensor. Equipped with & Features: -- Infeed safety stop, outfeed emergency stop, -- Motor load meters. -- 2-Roll infeed conveyor extension; -- High-efficiency dust extraction.NOTE: Specs have to be verified

DMC UNISAND K 1100 Wide belt sander4-Head, 43" (1,100 mm) max. width cap. Head sequence: (3) Contact rolls and (1) Combi with roller and segmented platen.Heads configuration: -- 1st Head: Helical grooved steel contact roll, 10" dia., 48 HP motor. -- 2nd Head: Helically grooved rubber covered contact roll, 12-1/2" dia. and 65-Shore covering hardness, 35 HP motor. -- 3rd Head: Helically grooved rubber covered contact roll, 12-1/2" dia. 45-Shore covering hardness, 30 HP motor. -- 4th Head: Combi head with roller covered with rubber, 30 shore and Finishing sanding pad unit , 30 HP 2-speed motor with segmented pads pneumatically controlled -- All heads use 44" x 103" (to be confirmed) abrasive belts and are equipped with electronic tracking, automatic tensioning, automatic emergency breaking, and oscillating sanding belt cleaners.Controls: -- "HYDRA V-PAD" 10" Touch-screen computer for setup functions, color LCD Display, allows operator to setup/recall part thickness, -- Conveyor feed speed (3.5 - 18 MPM), -- Abrasive belt direction, and reversible speed setting of 4th head. -- Conveyor belt feed with inverter control, feed speeds from 11 - 60 FPM, 5.5 HP feed drive; -- Infeed & outfeed holddown pinch rolls on all heads, automatic part thickness setup with the moving feed belt, -- 2-speed motorized part thickness adjustment, 1/8" - 6" max. opening; -- Infeed & outfeed motorized conveyor extension rollers, automatic part thickness setup sensor. Complete with: -- Safety stop at infeed, -- Anti-kickback device, -- Infeed & outfeed emergency stops, -- Motor load meters, i -- Infeed & outfeed idle rollers, -- High efficiency dust extraction, and control console with monitor.Note: (spare parts not installed) New feed belt , new front pressure roller, new front pressure bar and several new small parts for approx $15,000 of value +11 boxes (approx 5 belts/ box) sanding belts 100 grit, 120 grit, 180 grit and 220 grit.

156" long x 60" wide x 80" high (3) vertical pneumatic Clamping bars (7) clamps that can be placed horizontal or vertical on perforated surface

1-3/4" Spindle dia., 7.5 HP motor, cast iron table. -- Includes: A & B 4-Speed belt driven Power Feeder with SCR feed control.

---Liquidation Item---Palletized & Ready to Ship with Free Loading! 9,000 CFM 20 HP Enclosureless Baghouse Dust Collector https://exfactoryauctions.com/Detail/DC-230838/event/L051624$1

-In Auction- MD DARIO SET2000/SN-44 16" Articulated Arm Band Saw, with Column for 360° Cutting Specifications: - Max. cutting width 390 mm (15.35"), Max. cutting height 350 mm (13.78"). Max. cutting height 410 mm (16.14") (with special blade guide). - Throat 16". - Height under guard 15”. - Blade length 2,640 - 2,720 mm (103.94" - 107.09"), Min. blade width 3 mm (0.12"). Complete with: - "SN-44" Band Saw with 1.1 kW (1-1/2 HP) - 3,380 RPM - 230/400 V Dual voltage motor, Coping device, & Double handgrip control. - Mounted to "BS600" Articulated Arm with 45-43/64" Extension & 33-55/64" Realizable radius. - Mounted to Column with 9-1/2” x 15-1/2” Work area & Arc cutting device. - Mounted on 40” x 40” Base with 5-1/2” W x 3-1/2” H Fork pockets on 18” Centers.

Davis & Wells Horizontal Boring Machine Call 800-459-2148 for more info.

3/4 HP 1725 rpm motor 115/208/230 volt single phase approx. 12” x 30” table Jacobs chuck approx. 3/4” footpedal Assorted fixtures and tooling as pictured.

40 HP Deckker vacuum pump 220V Skid mounted 5,803 Hours Ready to ship

7.5 HP Lubricated rotary vane vacuum pump, max. 145 CFM, max.; heavy duty construction, compact design, small foot print, high tech vane material provides long life. Single-stage pump with an integrated closed loop oil recirculation system. Air cooled design with gas ballast valve and internally mounted inlet check valve. Float type oil-recovery valve ensures maximum air/oil seperation. -- High efficency multi-stage exhaust filter removes 99.9% of exhaust smoke. -- Complete with: 2-Year warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

9,7 HP Lubricated rotary vane vacuum pump, max. 229 CFM, max.; heavy duty construction, compact design, small foot print, high tech vane material provides long life. Single-stage pump with an integrated closed loop oil recirculation system. Air cooled design with gas ballast valve and internally mounted inlet check valve. Float type oil-recovery valve ensures maximum air/oil seperation. -- High efficency multi-stage exhaust filter removes 99.9% of exhaust smoke. -- Complete with: 2-Year warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

7.5 HP Oil-free (dry) rotary vane vacuum pump, max. 100 CFM, max., 26.4" Hg; heavy duty construction, compact design, small foot print, high-tech, self-lubricating graphite composite vane material provides long life and less vane replacement. Air cooled design with low noise level. -- Complete with: 2-Year warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual. -- NOTE: Inlet conn: 1.5" and discharge conn: 1.5"

10 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 150 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. UL/CSA EPACT compliant motor-mounted design eliminates the use of V-belts or couplings, resulting in very low maintenance and zero downtime. Air cooled design and low operating noise level. -- Complete with: Inlet filter, 3-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

DEKKER VMXO453KA1 Oil Ring/Sealed Vacuum Pump; 25 HP VMAX oil-sealed liquid ring, compact motor-mounted vacuum pump system. -- Specifications: 410 CFM rated cap. at max. 29" Hg; heavy duty construction, compact design, small foot print, patented. -- High-efficiency DX-5 separator eliminates oil carry-over concerns. Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. -- Sturdy bearing pedestal mounts to standard NEMA, C-face motor. Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. -- Continuous operation over the full vacuum range without overheating. Air cooled design and low operating noise level. -- Add ... $976 for 208 V. upgrade. -- Complete with: Inlet filter, relief valve, 3-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

DEKKER VMX0553KA1 40 HP Liquid ring vacuum pump:40 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 550 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. -- Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. -- Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. -- Continuous operation over the full vacuum range without overheating. -- Air cooled design and low operating noise level. -- Complete with: Inlet filter installed, Vacuum relief valve installed, Spin-on Oil Filter , Exhaust Drip Leg, 3-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

15 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 200 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. -- Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. Continuous operation over the full vacuum range without overheating. Air cooled design and low operating noise level. -- Complete with: 2-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

20 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 300 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. -- Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. Continuous operation over the full vacuum range without overheating. Air cooled design and low operating noise level. -- Complete with: Inlet filter, 2-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

DELTA - 22-650, ...Single Planer.DELTA/INVICTA 12" TABLE TOP (no stand) Single Planer equipped with: 2 HP motor; 3-knife round cutterhead; with rollers.Capacity of 12"; feed rate of 15-1/2 FPM.250 LBS

DELTA - RC-63D, ...Planer w/10 HP MotorVery Nice INVICTA - RC-63D - 24″ Single Head Planer -- Mfg.: 11/1997; Model 22610; serial no. 1302. -- 24-3/4″ Width; 10 HP - 230 Volts, 3-phase motor. -- Solid serrated infeed roller; urethane outfeed roller. -- (2) Feed speeds. -- Adjustable bed rollers. -- Power table up & down with handwheel fine adjustment. -- 4-Knife cutterhead with: ESTA "Dispozablade" quick change Knife System. -- 6" Dust Port. -- Weight approx. 1,650 Lbs - Dims: 43'' L x 38" W' x 43" H

DELTA 11-990C 12" 5-Speed Bench-Top Drill PressSpecifications: -- Table size 8-1/2" x 8-1/2" with 15-1/2"; x 40"; x 11/16"; Thick Plywood top, Table tilt 40° Left/Right. -- Base size 8-1/4" x 8-1/4". -- Quill travel 2-3/8", Chuck capacity 1/2", JT33 Spindle taper. -- Spindle speeds 620, 1,100, 1,720, 2,340, & 3,100 RPM.Equipped with: -- 1/3 HP - 1,720 RPM Motor.Complete with: -- Portable Wood Cabinet.Dimensions with cabinet: 41" x 36" x 57" H