Woodworking Equipment For Sale

Year: 2006 Working Width: 25mm to 230mm (1" to 9") Working Thickness: 8mm to 120mm (0.31" to 4.72") Bottom Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Top Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 7.5kW (10 HP) Side Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Configuration: Bottom, Side, Side, Top, Top, Bottom Feed Motor: 4kW (5.5 HP) Elevation Motor: 0.75kW (1 HP)

GB-CIS Single-end 575V / 3 Ph / 60 Hz 5” wide rubber pad conveyor Equipped with industrial motor for full power cutting and sanding capacity

LOCATELLI "OMK-300" Automatic Lathe with Sanding; From automatic feeding to finished product ejection - a complete "Turning & Sanding" System. -- 11-13/16" Max. between centers, 3-1/8" max. & 5/16" min. stock dia., 5.5 HP spindle motor with (3) spindle rotations of 3,020 - 4,580 & 6,400 RPM.6-Station Rotary Carousel/Drum with the following operations: -- Station 1: Pickup and centering of workpiece. -- Station 2: Turning with hydraulically operated roughing & finishing gouge. -- Station 3: Finish turning with hydraulically operated finishing gouge; rough & finish gouges advance via 1.5 HP hydraulic motor at a rate of 0.33 - 52 FPM. -- Station 4: Initial sanding with adjustable 0.5 HP vibrating brush. -- Station 5: Secondary sanding with adjustable 0.5 HP vibrating brush. -- Station 6: Ejection of finished workpiece. -- PLC Function for immediate fault detection and facilitates setup. Complies with CE high standards for operator safety. -- Features: Billet capacity has been increased to a special 5.9" x 5.9" (150 mm square). -- Complete with: Separate operator control panel. -- Includes: Inventory of spare parts and tooling. -- Machine kept under power but has not been used for production for several years.

Lower Denibbing Sander

Loewer Discmaster 6TD Brush Sander Vacuum Bed

LOEWER DISC MASTER 3DBB Denibbing Sander with (2) Sanding Stations, 53" Width Capacity:53" Width cap. Denibbing Sander with a patented combination of rollers and rotating/oscillating discs make the LOEWER Discmaster 3DBB Sanding Machine the ideal finishing solution for entry doors, cabinet doors, drawer fronts, sheet goods, shutters, face frames, furniture and much more. -- Ideal solution for all sanding applications including whitewood, stain and sealer coats (including UV). -- Operation: The workpiece first passes under (16) rotating discs with abrasive brush loadings and then under (2) large counter-rotating spiral brush roller type hubs,Head Configuration: -- 1st Unit: (16) Rotating discs 250 mm (10") diameter each with (24) keyways 75 mm (3") long that oscillate from left to right; provides very uniform edge breading in whitewood sanding and eliminates most (if not all) hand sanding of the sealer coat. The discs are variable speed from 50 - 300 RPM by frequency inverter. Eccentric orbital disc movement (patent pending). Separate height adjustment of the disc station to run discs only or brush rollers only or everything together. Digital display to show the height of the discs. -- 2nd Unit: (2) - 400 mm 16" dia. rotating brushes sanding rollers powered by 2.2 kW gear motor with external coolers. -- Variable spindle speed 14 - 300 RPM adjusted by frequency inverter on each spindle and separately adjustable. The first drum rotates with the feed and the second rotates against the feed. Includes a panel blow-off station. -- The patented combination of rollers and rotating discs provides very uniform sanding across the entire workpiece, even into deep profiles without losing detail. Specifications: -- Disc oscillation by 0.37 kW (0.5 HP) motor, (0 - 60 Cycles/Min). -- Min. part thickness 4 mm (3/16") and max. 4"; -- Vacuum bed with 7.5 kW (10 HP) motor; Vacuum blower outlet on side of the machine has 200 mm outlet. -- Variable vacuum bed conveyor feed speed from 3 - 15 m/Min (8 - 50FPM). -- Pneumatic belt centering system. -- Fixed bed height for installation in a line. -- Separate variable speed adjustment for disc & roller. -- Antistatic brush strip device. -- Control panel Left Side-mounted. -- Emergency stop pull cords at both infeed and outfeed. -- Dust extraction outlets 3 x 80 mm (3.2") 4 x 140 mm (5.6") and 1 x 200 mm (8").Equipped with: -- PLC Touch-screen control: Simple & user-friendly "TOUCH SCREEN" PLC control with color monitor; PLC storage capacity for up to (25) individual sanding programs; -- the PLC control interface also allows for easy machine connection to a flat-line, tow-line or hanging-ling finishing system.

LOEWER DENIBBING SANDER4-Head, 53" width cap., great Denibbing Sander -- The patented conbination of rollers and rotating / oscillating discs makes the Perfection BBDD sanding machiine the ideal finishing solution for entry doors, cabinet doors, drawer fronts, sheet foods, shutters, face frames, furniture and much nore. -- The LOWER DMBBDD sanding machine is sthe ideal soluton for all sanding applications including whitewood, stain and sealer coats(inciuding UV). The work piece first passes under two large counter rotating spiral hubs, then under eleven rotating discs that oscillate from left to right. This provides very uniform edge breading in whitewood sanding and eliminates most (if not all) hand sanding of the sealer coat. -- The patented combination of roller and rotating discs provieds very uniform sanding across the entire work piece, even into deep profiles without loosing detail. -- SPECIFICATIONS OF MACHINE --Thickness of work piece Min: 10mm (1/2")-- Max: 80mm (3") --Feed belt width Max:1350mm (53") --Feed belt motor 1.5 KW (3Hp) 3-15 M/min (10-50 Ft/min) --Top sanding roller 2.2KW (3Hp) 25-300 O/min (RPM) --Disc Rotation 2.2KW (3Hp) 25-300 O/min (RPM) --Disc Osciliatiojn ).37KW (0.5) 10-60 O/min (RPM) --Vacuum motor 7.5KW (10Hp) --Machine weight 1,800 kg -- Aproximate Machine dimensions based on similr machine W:2000mm (6'7")/ L:2780mm (9'2")/ H:6'11")

dowel machine made by Loser Machine type: AA 220 Machine # 1116 Bi 80 Voltage: 440 Hertz 60 Removed from service November 2020. for dowel diameter approx. 6-13 mm smallest cutting length 15 mm The dowel length is adjustable between 20 and 150 mm and is determined by means of an adjustment scale. The chamfer thickness can be set as required.

Reconditioned MAC 144MCF153 Reverse Air Bag House, 2,219 SQ/FT Cloth Media, 18,000 CFM Capacity @ 8:1 Air/Cloth Ratio, 12” Rotary Valve, Structural Support, VERY GOOD CONDITION, $38,000

MACMAZZA TS 90 FRONT LOAD, AUTO. PANEL SAW: -- Specifications: -- 169" Cutting length; 2.83 effective cutting height, 12 HP main saw motor. -- Features: -- Variable saw carriage travel speed 3 - 328 FPM, constant return of 328 FPM; electronically controlled overhead program fence, rack & pinion driven on both sides, forward & return speed 2 - 164 FPM, equipped with (6) clamps. -- PC-Based LENOVO 90GA computer control with CELERON Quad-Core J3455 Processor & 19" color monitor, 4 GB RAM, 1,000 GB Hard drive, (6) USB Ports. -- Complete with: -- Rear table constructed of aluminum profiles with plastic rollers, (3) front air floatation tables; side pressure device for crosscutting on pressure beam.Photos not of actual machine.

1997 NPN MACO Tie Machine, s/n 1997001, 100hp electric motor on side planers, includes electric control box, 4-1/2" capacity, power outfeed.

MAGGI SYSTEM 29 CONSTRUCTION/LINE BORERAdjustable 29-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 46 Double Head Line Boring Machine:Heavy Double Head Line Borer with (2) 23-spindle heads; 32 mm spindle spacing.Specifications: -- Drilling from the bottom up and with 5-1/8" - 25-19/32" distance between rows. -- Drilling vertically from the bottom allows the chips to drop down falling out of the holes. -- Drilling depth of up to 2-1/16" (55 mm) max., takes only seconds to set. -- (2) 2 HP - 3,500 RPM Commercial Duty motors; spindles with steel gears & high quality bearings. -- Easy repetition by (2) air index pins for continuous line drilling, left and right roller track supports extend up to 400 mm (15-3/4") for larger panels.Features and Includes: -- 120" Back fence with (4) repeat "flip" stops; includes 27-3/4" (704 mm) fence for quick positioning of flip stops. -- (6) Pneumatic holddowns to automatically actuate when the drill cycle begins. -- (46) "Quick Change" chucks for easy tool change. -- Magnetic motor controls and 1/4" air regulator with filter and oiler; 100 PSI required air pressure.

MAGGI SYSTEM 21 PRESTIGE Construction & Line BorerAdjustable 21-spindle boring head on 32 mm centers with position indicator.Specifications: -- Stops in 0° and 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with magnifying glass viewer. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (2) repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks.OPTIONAL: -- 230V Single Phase add $600.00 --29900100 Stop Reference Pin for Line Boring $195.00 -- 26000069 Set of Reference Fences for 45 and 90 degrees $195.00 -- 36000061 Additional Quick Change Bit Adaptor $27.50 ea -- 29971019 Additional Holddown Cylinder Assembly $395.00 ea -- Hinge Boring Head (Specify Blum, Grass, Salice, or Hettich) $695.00 -- TDBSE5705LH or RH 5mm x 57mm LH OR RH Brad Point $9.85 ea -- TDBSE5708LH or RH 8mm x 57mm LH OR RH Brad Point $11.95 ea -- TDBSEHB5735LH or RH 35mm x 57mm LH OR RH Hinge Point $26.80 ea -- FREIGHT TO ANYWHERE IN THE CONTINENTAL USA $ 300.00

MAGGI GT 800 CNC MACHINING CENTER: -- SpecificationsFlexible "Vertical/Horizontal" Boring & Grooving Machining Center that can reach movement speeds of: 82 FPM (25 MPM) in "X" & "Y" axis & 49 FPM (15 MPM) in "Z" axis with total safety. -- Working FieldMax. part size for "X" axis is virtually infinite; "Y" axis 31.5" (800 mm); max. part thickness 2" (50 mm). Min. part size for "X" axis is 9.84" (250 mm); "Y" axis 3.93" (100 mm); min. part thickness of 0.39" (10 mm).Panel End/Edge Reader for perfect panel positioning/placement. -- Boring Unit:Suitable for drilling on face & sides of panels including: Holes for dowels, hinges, KD fittings, and shelf holes.(1) Boring block with: 3 HP (2.2 kW) - 3,400 RPM Motor; (7) vertical spindles with: (4) Spindles in "X" axis & (3) spindles in "Y" axis.(1) Horizontal spindles with: (1+1) In "X" axis for top & bottom edge boring.Boring Capacity: 0 to 800 mm (31-1/2") with any spindle. -- Operator InterfacePC Front End with: Extremely intuitive user interface with up to (1,000) program storage space; real-time multitask processing.12" TFT "Touchscreen "Monitor; soft touch keypad & industrial mouse; RS-232 Serial ports, USB ports; (1) CD ROM drive. -- Complete with:Pneumatic part clamping roller devices; auto lubrication system; sound enclosure & safety devices. -- Actual Model is: MAGGI GT 800

MAGGI SYSTEM 35 CONSTRUCTION/LINE BORINGAdjustable 35-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 21 PRESTIGE CONSTRUCTION / LINE BORER Adjustable 21-spindle boring head on 32 mm centers with position indicator.Specifications: -- Stops in 0° and 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with a mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (2) repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks.

MAGGI SYSTEM 23 Construction Line BorerConstruction Boring Machine that drills vertically from bottom and horizontally from rear.Specifications: -- (23) Spindle head on 32 mm centers. -- Table size 38" x 16" -- Max. working width: 25" -- Drilling stroke: 2-1/2" -- Main motor: 2 HP -- Adjustable drilling depth with patented spiral setting device: ?0 to 2.5" -- Tilts pneumatically from lower to rear position with locking points between 0° - 90° for drilling any angle, Equipped with: -- 120" Back fence with (4) stops -- Foot pedal control -- Magnetic Starter with overload protection. -- (23) quick change chucks. -- (2) Patented quick-release pneumatic hold-down clamps with independent manual movement. -- Dust outlet: 3"

MAGGI SYSTEM 23 Construction Hole Boring Machine Adjustable 23-spindle boring head on 32 mm centersSpecifications: -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with a mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 38" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Dust Outlet: 3".Net weight: 630 Lbs; Dimensions: 51.7" x 37.8" x 50" Tall; Crated Dimensions: 44" x 38" x 42" Tall; Crated Weight: 664 lbs.Available in single phase ... Add $ 600.00

- Min. panel length 9.06 inch - Max. panel length 10 ft 5.98 inch - Min. panel width 8.27 inch - Max. panel width 4 ft 3.18 inch - Panel stack station - no. stations 1 loading - Max. panel stack height 5 ft 2.99 inch - Work capacity 13 Cycles/min - Lifting capacity 100 Kg - Panel stack infeed - Movement system with frame System suction cups - Vacuum pump - no. pumps 1 - Control system - PLC MAGELIS