Woodworking Equipment For Sale

Timesavers Model 2331-04-334 3-Head Orbital Sander 43" Machine

Single Head Top and Bottom Sander

TIMESAVER 1321-14-01 43" Wide Belt Sander (2) Heads:43" width cap., drum, combination head.Head Configuration:1st Head: Rubber covered contact roll, 8" dia. with dial indicator heigth adjustment, 20 HP motor.2nd Head: Combination head with a rubber covered contact roll 3-3/8" dia. and 2-1/2" wide finishing platen, 15 HP motor.Specifications: -- Abrasive belt size: 43" x 60" -- Main motors: 20HP & 15HP -- Maximum width stock: 42" -- Minimum part length: 13" -- Maximum thickness opening: 5" -- Feed speed: 15-45 FPM -- Passline height: 33-38" -- Dust extraction: 2000 CFM (5" static pressure) -- Compressed air usage: 4 CFM @ 90 psiEquipped with & Features -- Four Jack Bed Construction -- Dual Infeed and Dual Outfeed Holddown Rolls --Air Operated Disc Brakes -- Centralized Control Panel -- Infeed Stop Bar -- Hour Meter -- Main Motor Percentage Load Meters -- Electronic Go-To Device -- Motorized Thickness Adjustment -- Through-Beam Abrasive Belt Tracking -- Quick Release Outboard Support -- Variable Speed Conveyor Drive

TiMESAVERS 237-KA IC Planer Sander 2-HEADs (2) Heads Planer Sander Combination, 37" width capacity.Head Configuration: -- 1st Head: 7" Dia. Helical "Quiet Cut" planer head with (6) spirals of 4-sided carbide inserts with 15ø rake angle, head turns @ 3,200 RPM, head adjustment with dial indicator readout, 30 HP motor. -- 2nd Head: Combination Sanding head with 6" dia. contact roll (60 to 65 duro.) and 2-1/2" wide finishing platen, 25 HP motor; sanding head with 37" x 75" abrasive belt with "POSI-TRAK" electronic tracking.Feed System: -- Variable feed speed 15 - 45 FPM, automatic conveyor belt tracking, 3-ply rough top conveyor belt. -- Anti-kickback fingers on infeed, air loaded sectional shoe with dial indicator adjustment and double grooved pinch roll on infeed of knife head. -- Infeed & outfeed pinch rolls on sanding head, air activated caliper disc brakes on all heads. -- Motorized part thickness adjustment 0" - 6" with digital readout.Complete with: -- Controls mounted on belt loading side, main motor fuse protection on both heads, load meters for each head, "over thick" shut-off system and 24" infeed conveyor extension.

TIMESAVERS 252-4-IC, ... Wide Belt Sander, 4-Head.4-Head, 51" cap. - Great sander for solid wood and veneer panels equipped with (2) Contact rolls and (2) Air platens. Head Configuration1st Head: Rubber covered contact roll, 9-1/2" dia. 60 - 70 Durometer, 40 HP motor.2nd Head: Rubber covered contact roll, 9-1/2" dia. 50-60 Durometer, 30 HP Motor.3rd and 4th Head: Finishing platens, 2-1/2" wide "Veneer Saver" inflateable platens with adjustable timers for leading and trailing edges, 20 HP motor each head.Specifications: -- 38" Constant pass line height of Vacuum conveyor with suction fan and motor bed assembly for veneer and solid wood sanding. -- Adjustable air floating infeed and outfeed hold down shoes. -- 52" x 103" abrasive belts with "POSI-TRAK" electronic tracking.Equipped with & Features: -- Motorized part thickness adjustment with mechanical digital readout. -- Auto part thickness set-up, 0" - 6" opening. -- Hydraulic feed belt operation of 15 - 45 FPM via 7-1/2 HP hydraulic pack. -- 4-Motor load meters, controls mounted on belt loading side. -- Disc brakes on sanding head motors. -- 30" Infeed load area.

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

TIMESAVERS 2331-04-334 DUAL HEAD DENIBBING SANDER2-Head, 42" width capacity Sanding / Denibbing system. -- (2) 5" Wide platens featuring a "dual" action head with a high speed orbital movement and combined back & forth oscillation to remove abrasive belt crossgrain scratches; platens designed with a quick change system for abrasive material. -- (1) Nylon abrasive impregnated (150 grit) Cleaning / De-Nibbing brush, 10" dia., drive unit for brush rotation, brush wear adjustment via jack screws. -- Vacuum holddown conveyor system with variable feed speed 5 - 15 FPM. -- Double infeed and outfeed holddown pinch rollers. -- Power raisng and lowering of the conveyor bed with AUTO-SET feature, 0" to 6" part thickness capacity. (4) DUFF-NORTON acme screw jacks under conveyor bed, 36" infeed conveyor area.

TIMESAVERS - 352 HDA, ...Abrasive Planer/Sander2-Head, 51" width cap. Heavy Duty Sander. -- 1st Head: Smooth steel contact roll, 11-1/2" dia., 75 HP motor. -- 2nd Head: Spiral Grooved hard rubber contact roll (11-1/2" dia.) , 75 HP motor; 52" x 103" abrasive belts (6,300 & 4,300 SFPM) with POSI-TRAK electronic tracking. Equipped with: -- Heavy-Duty solid rubber (no vacuum holddown) feed belt for Heavy-Duty operation. -- Motorized part thickness adjustment, 0" - 6" opening. -- 38" - 32" Conveyor height passline with MITUTOYO LED readout, conveyor belt feed. -- 5 HP Variable feed speed from 20 - 60 FPM, smooth rubber conveyor belt. -- Infeed & outfeed spring loaded holddown shoes, infeed emergency stop bar, anti-kickback fingers on infeed. -- Disc brakes on sanding head motors, 18" infeed load area, and motor load meters on sanding heads.

Timesaver 2331-45-006 (3) Head Wide Belt Sander;52" Width cap , Drum, Drum, Combination HeadHead configuration 1st Head: 30 HP motor, 8" dia. rubber covered serrated drum with 65 / 70 duro.2nd Head: 25 HP motor, 8"dia rubber covered serrated drum with 65 / 70 duro.3rd Head: 25 HP motor, segmented combination, drum/platen 5-1/2" dia. drum also with 65 / 70 duro drum and a 2-1/2" platen;Specification -- 3rd head has abrasive belt air jet blow off. -- Variable feed 15 / 45 FPM; -- Double in-feed and out-feed rubber covered hold-down rolls.Equipped with & Features -- Star Delta starters on all heads; disc brakes on main motors. -- In-feed stop bar, motorized bed table lift -- PLC controller with HMI interface, electronic abrasive belt tracking. -- This is not a constant pass line sanderNote from Seller: 1800 Hours! We are the 2nd owner of the unit. Well maintained by original owner and purchased by us in 2022. At that time the machine was inspected an by original owner and purchased by us in 2022. At that time the setup and all adjustments done by TS tech

Timesavers Series 1300 (3) Head 43" Wide Belt Sander43" width cap Drum, Drum, Combination headHead Configuration1st Head: 8" dia. contact roll 2nd Head: 8" dia. contact roll 3rh Head: Combination Head 5 1/2" dia. Contact Roll , 2 1/2" width platen on combination headSpecifications -- Dial indicators on drums/platens -- 75" abrasive belt length -- Disc brakes on main motor -- 20-45 FPM feed speed A/CEquipped with & Features -- Auto set-up device -- Motorized lift -- 0-5" opening (33-38" passline) -- 14" infeed loading area -- Quick release outboard support -- Through-beam abrasive belt tracking -- 15" minimum part length -- Emergency stops at infeed and out-feed location

These two sanders are being sold as a line. They are ready for immediate removal, with riggers on site over the first week of August, 2024. - Sander 1: Timesavers Sander Model 352-6KAICBT, bottom frame unit. 3 Head, 50-HP Motors. - Sander 2: Timesavers Sander 352-6KAICBT, s/n 27080 top frame unit. 3 Head, 50-HP Motors

Only 697 hours, taken from service (2) top heads - one orbit, one brush (1) 3HP main orbit motor (1) 3HP feed motor (1) 1HP brush motor (1) 1HP oscillation motor 460V Max. stock width 36" Max. thickness 6" 32-38" variable passline height 2,000 CFM @ 5,000 FPM exhaust air requirements

Timesavers 43" Speedsander Single Phase Machine

TimeSaver Mdl 325-2 36" Wide Belt Sander S/N 7887

Timesaver Mdl 337-6 36" Belt Sander S/N 18395

TIMESAVERS 4331-45-001 Wide belt sander (3) heads 51" width cap. 1st Head 9-1/2" Dia. rubber covered (60-65 Duro) 40HP motor 2nd Head 9-1/2"Dia. rubber covered (60-65 Duro) 30HP motor 3rd Head Combination head with 6" dia rubber covered contact roll and a 2-1/2" finishing platen. 30HP motor. 52" x 103" abrasive belts with dual "posi-trac" electronic-solid state tracking Controls mounted on belt loading side Conveyor feed belt replaced (2) years ago.

Timesavers Model 2321-24-01 Sander 43"x75" Belts 2-Head IceClean System on each head

TIMESAVERS 137-2HD Double Head, 36" Wide Belt Sander. 2-Head, 36" width cap.Specifications: -- 1st Head: 6" Dia. rubber-covered contact roll, 25 HP motor; -- 2nd Head: 2-1/2" Wide finishing platen, 15 HP motor. -- 37" x 60" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, 15 - 45 FPM variable feed speed. Equipped with: -- Double infeed & outfeed spring loaded holddown rolls, 0" - 8" max. manual part thickness opening with mechanical digital readout, air-operated disc brakes, motor load meters. -- 21" Infeed conveyor extension, and infeed emergency stop. -- Includes: (1) Extra rubber covered roll, (1) pipe, (1) Elec. disconnect.

TIMESAVERS 150-1v Wide Belt Sander;1-Head, 50" width cap.; contact roll head with 40 HP motor; 50" x 103" abrasive belt size, air tracking, 2-1/2" max. thickness cap., adjusted by scale; variable feed speed 40 to 100 FPM; incl. in- & outfeed extension. -- Used to have a checkrail edge sanding attachment for sanding sash (no longer available), but includes (1) extra set of new conveyor belts.

TIMESAVERS 137-1 SINGLE HEAD WIDE BELT SANDERSpecifications: -- 36" Width capacity, combination sanding head with 6" dia. spiral grooved rubber contact roll. -- 1-1/2" Wide adjustable height polishing platen on slide out assembly. -- 37" x 60" Abrasive belt size.Equipped with: -- 20 HP Main motor, -- Electric eye abrasive belt tracking, and limit switch monitoring. -- 1 HP feed motor with a fixed speed of 30FPM. -- 0" - 8" manual part thickness opening of conveyor bed. -- Double infeed & outfeed rubber covered holddown rollers. Complete with: -- 18" Infeed conveyor extension, motor load meter, and safety stop bar.