Woodworking Equipment For Sale

DELTA 11-990C 12" 5-Speed Bench-Top Drill PressSpecifications: -- Table size 8-1/2" x 8-1/2" with 15-1/2"; x 40"; x 11/16"; Thick Plywood top, Table tilt 40° Left/Right. -- Base size 8-1/4" x 8-1/4". -- Quill travel 2-3/8", Chuck capacity 1/2", JT33 Spindle taper. -- Spindle speeds 620, 1,100, 1,720, 2,340, & 3,100 RPM.Equipped with: -- 1/3 HP - 1,720 RPM Motor.Complete with: -- Portable Wood Cabinet.Dimensions with cabinet: 41" x 36" x 57" H

Delta Table Saw 5 HP 230 volt 3-phase

Manufacturer’s Specfication - Motor: - Horsepower: 3 HP - Voltage: 230V - Hertz: 60 Hz TEFC - Phase: 1-Phase - Feed Motor: - Horsepower: 1/6 HP - Phase: 1-Phase - Speeds: 1,550 RPM Drums; 3 to 20 FPM Feed Belt - Sanding Capacity: 12-1/4 in. x 25-1/2 in. - Minimum Sanding Thickness: 1/4 in. - Minimum Length of Unbutted Stock: 6 in. - Drums: 5 in. x 26 in. Aluminum - Sanding Strip Size: 5-1/8 in. x 92-1/2 in. - Dimensions (Assembled): 31 in. x 46 in. x 53 in. - Base Dimension for Mobile Base: 17-3/4 in. x 43 in. - Weight: 418 lbs.

Delta Radial Arm Saw

DELTA - 22-650, ...Single Planer.DELTA/INVICTA 12" Table Top (no stand) Single Planer equipped with: 2 HP motor; 3-knife round cutterhead; with rollers.Capacity of 12"; feed rate of 15-1/2 FPM.250 LBS

DELTA - RC-63D, ...Planer w/10 HP MotorVery Nice INVICTA - RC-63D - 24″ Single Head Planer -- Mfg.: 11/1997; Model 22610; serial no. 1302. -- 24-3/4″ Width; 10 HP - 230 Volts, 3-phase motor. -- Solid serrated infeed roller; urethane outfeed roller. -- (2) Feed speeds. -- Adjustable bed rollers. -- Power table up & down with handwheel fine adjustment. -- 4-Knife cutterhead with: ESTA "Dispozablade" quick change Knife System. -- 6" Dust Port. -- Weight approx. 1,650 Lbs - Dims: 43'' L x 38" W' x 43" H

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i54 ROCKWELL/DELTA 17-600 17" Variable-Speed Floor-Type Drill Press Specifications: Table size 11" x 14". Base size 10" x 13-1/2". Quill travel 5". Spindle speeds 350 - 4,250 RPM. Equipped with: MT2 Spindle taper. 1 HP - 1,725 RPM Motor.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i56 DELTA 14" Bench-Top Drill Press Specifications: Table dia. 10" x 10". Base size 7" x 9-1/2". Quill travel 3-1/2". Equipped with: 1-1/2 HP - 1,740 RPM Motor.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5e ROCKWELL/DELTA 46-200 12" Variable-Speed Wood Turning Lathe Specifications: Swing over bed 16", Swing over gap 22". Distance between centers 28". Spindle speeds 340 - 3,600 RPM. Equipped with: 3/4 HP - 1,725 RPM Motor. Complete with: Tool Rest, with Mount.

Delta 6" Jointer

Delta RT 40 Invicta Table Saw, 3 phase power required, great operating condition. Phase converter available. Price Reduced! $2,150 OBO 301-501-6344

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i69 ROCKWELL/DELTA 34-450 UNISAW 10" Tilting Arbor Table Saw Specifications: Table size 20" LR x 27" FB x 34" H with 8" Left & Right Cast-iron table extensions, Table tilt 45° Right. Arbor dia. 5/8". Max. depth of cut: 4-1/8" at 90° & 2-1/8" at 45°. Max. dado width 7/8". Rip cap.: 25" Right & 12” Left. Complete with: Rip Fence. Blade guard.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i6a ROCKWELL/DELTA 34-450 10" Tilting Arbor Table Saw Specifications: Table size 20" LR x 27" FB x 34" H with 8" Left & Right Cast-iron table extensions, Table tilt 45° Right. Arbor dia. 5/8". Max. depth of cut: 4-1/8" at 90° & 2-1/8" at 45°. Max. dado width 7/8". Rip cap.: 52" Right & 14” Left.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i6b ROCKWELL/DELTA UNISAW 10" Tilting Arbor Table Saw Specifications: Table size 20" LR x 27" FB x 34-1/2" H with 8" Left & Right Cast-iron table extensions, Table tilt 45° Right. Arbor dia. 5/8". Max. depth of cut: 4-1/8" at 90° & 2-1/8" at 45°. Max. dado width 7/8". Rip cap.: 25" Right & 12” Left. Equipped with: 3 HP - 3,450 RPM Motor. Complete with: Rip Fence. Blade guard.

DEPENDABLE - 203, ...Cold Press40" x 102" Cap., side loading on 102" sideSpecifications: &#9679 (3) Split upper platens: 34" wide x 40" deep; split platens can be interlocked for single platen operation. &#9679 45" Max. daylight opening with 12" down stroke hydraulic cylinders. &#9679 (6) Rows of pop-up rollers in machine bed for loading & unloading. &#9679 (3) 7-3/4" Dia. hydraulic press cylinders from the top; (1) per platen. &#9679 Hydraulic power pack with 10 HP motor mounted on floor at end of Press.

Detel M-2H Boring Machine (2) 25-Spindle Boring Heads

DETEL M-2H DOUBLE ROW LINE BORER.(2) Line boring heads of (25) spindles each on 32 mm centers, drills from the bottom up.Equipped with: -- (2) 2 HP motors drive spindles at 3,400 RPM. Hand crank adjusts the opening between heads from 5" - 25" w/mechanical digital readouts, drilling depth up to 2-1/2" -- Dust Collection on each head. -- Hardened steel gears that are pressed onto the spindle shafts, 120" back fence with (4) large flip-stops. -- (2) Pneumatic index pins with independent switches for sequence boring on long side panels. -- (2) Overhead pneumatic hold-downs. -- Complete with standard screw-in 10 mm collets; air/electrical controls, pneumatic oiler, and foot pedal actuator for clamping & boring cycle.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i68 DEWALT GE 16" Radial Arm Saw Specifications: Base size 31" x 48" x 35" H. Cross cut cap. 24", Rip cap. 38" Out & 20" In, Thickness cap. 5", Arbor diameter 1" Equipped with: 5 HP Motor. Automatic blade return device. Complete with: 12” W x 20’ L Infeed Gravity Roller Conveyor, with 1-7/8” Dia. Rollers on 4” Cen. Outfeed table, with 5’ L Bar, with (7) Flip stops.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5m DEWALT DWS779 12" Double Bevel Sliding Compound Miter Saw, with Stand Specifications: Miter angles 60° Right & 50° Left. Bevel angles 45° Right & 45° Left. Dimensional lumber cut capacity: 2" x 14" at 90° & 2" x 10" at 45°. Equipped with: 1,110 W - 15 A - 3,800 RPM Motor. Stainless steel miter detent plate with Cam lock, & (10) Positive stops, & Detent override. Complete with: Stand, with 10" W Stock supports. Saw Dimensions: 32" x 27" x 28" H. Stand Dimensions: 54" x 27" x 33" H. Stand Dimensions (Extended): 120" x 27" x 33" H. Saw with Stand Dimensions: 54" x 32" x 61" H. Saw with Stand Dimensions (Extended): 120" x 32" x 61" H.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5n DEWALT DW716 12" Double-Bevel Compound Miter Saw, with Portable Stand? Specifications: Miter angles 50° Right & 50° Left. Bevel angles 48° Right & 48° Left, with Positive stops at 0°, 33.9°, 45°, & 48°. Dimensional lumber cut capacity: 2" x 10" at 90° & 2" x 18" at 45°. Equipped with: 15 A - 3,600 RPM Motor. Stainless steel miter detent plate with Cam lock, & (11) Positive stops, & Detent override. Complete with: RIDGID "MS-UV (MITER SAW UTILITY VEHICLE)" Portable Stand, with Max. weight 300 Lbs., Wheel size 12", 12-1/2” W x 1-1/4” Dia. Roller stock supports, Tool-free indexing extension lock levers, & Single-step release. Saw Dimensions: 25" x 25" x 29" H. Stand Dimensions: 56" x 24" x 38" H. Stand Dimensions (Extended): 96" x 24" x 38" H. Saw with Stand Dimensions: 62" x 29" x 62" H. Saw with Stand Dimensions (Extended): 96" x 29" x 62" H.