Woodworking Equipment For Sale

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,425 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,100 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 142 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 126" long steel platens for face gluing a variety of solid wood components. With it's modular design with each section having its own pressure control and 40" opening. -- 12" Deep x 42" wide clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT 78H-16W-84L-40H-M4 Pneumatic Pod Press w/adjustable Opening.Specifications: -- Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 84" long steel platens for face gluing a variety of solid wood components. -- Powered by a total of (18) 20 square inch diaphragm cylinders. -- With it's modular design each section has its own pressure control and 40" opening. -- 16" Wide x 84" Long x 40" High with fixed clamping opening with 1-1/2" adjustable increments. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT 78H-16W-42L Mini Air Pod PressThis Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, Specifications: -- 16" Deep x 42" long clamping capacity. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

Cuts with a 16" carbide tipped saw blade 240V/480V 3 phase 7-10 seconds per cycle

(2)Jones Superior Machine No 54T Band Saws

Year: 1999 Fully automated door lite cutting system for high volume production. Equipped with: Handler automatic door loader draws from two door stacks, – DL-NCA programmable automatic door lite cutter – Dual heads for quick change between steel and fiberglass, – EP-1 automatic edge prep machine bores for latch and mortises faceplate pocket.

KENTWOOD M 609 Moulder6-Head (B-R-L-T-T-B), working cap. 9-1/16"" x 6". -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- All spindles equipped with mechanical digital readouts. Mechanical readouts for pressure elements and chipbreakers. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. Infeed Complete with: (2) Rollers above and (1) in the table prior to first bottom spindle. -- Infeed table 2M (6'6"), chromed tables and fences. -- Includes: Central lubrication, manual table lubrication pump, side pressure roller mounted to infeed table and sound enclosure. -- Additionally equipped with: Short stock attachment at right spindle for short parts.

// This machine is in an Auction on exfactoryauctions.com// // Link to Machine: http://exf.ac/i4o KENTWOOD R 340 E 14" Dip Chain Gang Rip Saw, with ADVANTAGE RIP 1 Infeed, Saw & Infeed Installed New in 2010 Specifications: Arbor cap. 13". Max. blade dia. 14". Stock thickness 1/2 - 4.3". Min. stock length: 21.3" with Pressure Plate & 15.8" without Pressure Plate. Max. pass through width 25". Arbor Diameter 2.17". Feed speeds 15 - 130 FPM. Equipped with: 50 HP - 1,720 RPM Motor. Automatic chain lubrication. 2.2 kW (3 HP) Feed motor. ? Anti-kickback fingers. Mobile pedestal control, with Touchscreen & Dual control sticks. Complete with: 2009 KENTWOOD "ADVANTAGE RIP 1" 19-1/4” x 151” x 37-1/2” H Infeed Powered Roller Conveyor, S/N 0980002, with 2 HP Motor, 3-1/2” Rollers, 5-3/4” Dia. Rubber-covered pneumatic hold-down wheels, & 16-1/2’ L x 4-1/4” H Fence. (3) Lasers. Machine & Infeed Conveyor Dimensions: 270" x 68" x 66" H. Control Dimensions: 20" x 18" x 44" H. Machine Weight: 5,000 Lbs. Infeed Weight: 750 kg (1,655 Lbs.)

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i4p KENTWOOD M612HD 12” W x 6” H 6-Head Feed Through Moulder, with Tooling Specifications: B-R-L-T-T-B. Working width 15 - 300 mm (0.59” - 11.81"), Working thickness 15 - 150 mm (0.59” - 5.91"). Spindle diameter 1-13/16". Spindle speed 6,000 RPM. Variable feed speeds 6 - 36 MPM (20 - 118 FPM). Equipped with: Head Sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 25 HP, Top 25 HP, & Bottom 25 HP Motors, with Electronic brakes. Motorized spindle positioning of Heads #4 & #5, with LED Readout. Outboard bearings on Heads #1, #4, #5, & #6. Mechanical readouts for pressure elements & chip breakers, All chip breakers & pressure elements with Pneumatics. Inverter-driven feed system. Electronic interlocking feed height adjustment. (1) Serrated powered table rollers, (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. 13-1/2” x 88” x 38-1/2” H Chromed infeed table, with 8-1/2’ L 7/8” H Fence & Side pressure roller, Side pressure roller mounted at infeed. Central lubrication. Manual table lubrication pump. Full sound/safety enclosure. Remote pendant control. Complete with: Accessories & Tooling.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i4q KENTWOOD M609HD 9” W x 6” H 6-Head Feed Through Moulder, with Tooling Specifications: B-R-L-T-T-B. Working width 15 - 229 mm (0.59” - 9.02"), Working thickness 15 - 150 mm (0.59” - 5.91"). Spindle diameter 40 mm (1.57”). Spindle speed 6,000 RPM. Variable feed speeds 6 - 36 MPM (20 - 118 FPM). Equipped with: Head Sequence: Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 25 HP, & Bottom 30 HP Motors, with Electronic brakes. Outboard bearings on Heads #1, #4, #5, & #6. Mechanical readouts for pressure elements & chipbreakers, All chipbreakers & pressure elements with Pneumatics. Inverter-driven feed system. Electronic interlocking feed height adjustment. (1) Serrated powered table roller before 1st Head, (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. 10-1/2” x 65-1/2” x 39” H Chromed infeed table, with 7’ L 7/8” H Fence & Side pressure roller, Side pressure roller mounted at infeed. Central lubrication. Manual table lubrication pump. Full sound/safety enclosure. Remote pendant control. Complete with: Accessories & Tooling.

Specifications: - Working Width: 15 - 230 mm (19/32 to 9-1/16 inches) - Working Height: 6 - 150 mm (1/4 to 5-29/32 inches) - Spindle Speed: 6,000 RPM - Spindle Dia: 40 mm - Clamping Length of horiz. and universal spindles: 235 mm - Clamping Length of vertical spindles: 160 mm - Feed Speed (variable): 6-24 m/min (19-80 fpm) - Diameter of Feed Roller: 140 mm (5-1/2 inches) - Diameter of Table Rollers: 100 mm (4 inches) - Width of feed rollers: Shaft mounted to 9 inches - Width of rollers opposite left spindle: Stackable to 6 inch Head Power: - First head: 10 HP - Second head: 7.5 HP - Third head: 7.5 HP - Fourth head: 15 HP - Fifth head: 10 HP Additional notes: - Driven roller outfeed table: Smooth Steel - Driven table before first bottom spindle: Serrated Steel - Top Chipbreaker shoes: Dual receding (spring), Smooth - Manual lubrication pump - Tables and fences: Hardened Smooth Chrome Total Weight unskidded: 8,375 lbs.

KENTWOOD M612HD 12"; W x 6"; H 6-Head Feed Through Moulder, with ToolingSpecifications: -- B-R-L-T-T-B. -- Working width 15 - 300 mm (0.59"; - 11.81"), Working thickness 15 - 150 mm (0.59"; - 5.91"). -- Spindle diameter 1-13/16". -- Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 36 MPM (20 - 118 FPM).Equipped with: -- Head Sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 25 HP, Top 25 HP, & Bottom 25 HP Motors, with Electronic brakes. -- Motorized spindle positioning of Heads #4 & #5, with LED Readout. -- Outboard bearings on Heads #1, #4, #5, & #6. -- Mechanical readouts for pressure elements & chip breakers, All chip breakers & pressure elements with Pneumatics. -- Inverter-driven feed system. -- Electronic interlocking feed height adjustment. -- (1) Serrated powered table rollers, -- (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. -- 13-1/2"; x 88"; x 38-1/2"; H Chromed infeed table, with 8-1/2’ L 7/8"; H Fence & Side pressure roller, Side pressure roller mounted at infeed. -- Central lubrication. -- Manual table lubrication pump. -- Full sound/safety enclosure. -- Remote pendant control.Complete with: -- Accessories & Tooling.

KENTWOOD M609HD 9"; W x 6"; H 6-Head Feed Through Moulder, with ToolingSpecifications: -- B-R-L-T-T-B. -- Working width 15 - 229 mm (0.59"; - 9.02"), Working thickness 15 - 150 mm (0.59"; - 5.91"). -- Spindle diameter 40 mm (1.57";). -- Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 36 MPM (20 - 118 FPM).Equipped with: -- Head Sequence: Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 25 HP, & Bottom 30 HP Motors, with Electronic brakes. -- Outboard bearings on Heads #1, #4, #5, & #6. -- Mechanical readouts for pressure elements & chipbreakers, All chipbreakers & pressure elements with Pneumatics. -- Inverter-driven feed system. -- Electronic interlocking feed height adjustment. -- (1) Serrated powered table roller before 1st Head, -- (5) Smooth powered table rollers, (1) Before Head #2, (1) Before Head #4, (2) Before Head #5, (1) After Head #6. -- 10-1/2"; x 65-1/2"; x 39"; H Chromed infeed table, with 7’ L 7/8"; H Fence & Side pressure roller, Side pressure roller mounted at infeed. -- Central lubrication. -- Manual table lubrication pump. -- Full sound/safety enclosure. -- Remote pendant control.Complete with: -- Accessories & Tooling.

KENTWOOD M 609X Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 9-1/16"" x 6". Head sequence & Spindles: -- Bottom 10 HP, right 10 HP, left 10 HP, top 20 HP, top 20 HP and bottom 15 HP motor. -- Spindle dia.1 13/16" with cutterhead speed of 7,200 RPM. -- All spindles equipped with mechanical digital readouts. Mechanical readouts for pressure elements and chipbreakers.Electric brakes on spindles 2 through 5, Cutting circle of vertical spindles: 125 mm to 200 mm (4,7" X 7.8") Cutting circle of horizontal spindles: 125 mm to 200 mm (4,7" X 7.8"). Feed works: -- Cardan feed-works drive system with pneumatic pressure rollers, Inverter driven 5 HP feed system with feed speeds of 20 - 98 FPM. Infeed. -- Complete with: Full width driven bottom in-feed roller before first head, Serrated steel feed rollers before top horizontal head.Rubber coated feed rollers after top horizontal head, (2) Rollers above and (1) in the table prior to first bottom spindle; (2) additional powered rollers in the table. -- In-feed table 2M (72"), chromed tables and fences. Includes: -- Central lubrication, manual table lubrication pump. -- Side pressure roller mounted to infeed table, Short stock attachment at right spindle for short part, -- Sound enclosure and Interior cabin light. Note: Floor space: 77" W x 166" L x 68" T, Machine weight: 10,800 lbs.

KIKUKAWA - RP-12, ...Straight Line Rip SawSpecifications: --10 HP Arbor motor. -- 12" Blade cap. -- 18" Throat, 2-3/8" max. stock thickness. -- Variable speed from 75 - 150 FPM; 2 HP feed motor. -- Saw blade mounted overhead. -- Table size: 39" x 57".Equipped with & Features: -- Magnetic controls. -- (2) Sets of antikickback fingers. -- Automatic lubrication mechanism.Special Note: Rip Saw taken from service. Runs good glue line; OK for soft woods and surfaced materials. Does not do a good glue line on rough or semi-rough material. This is a Japan-built Saw, and they are built well with a small footprint .

KILLINGER KM-150 Bench-Top Flute & Barley Twist Machine for Right & Left-Hand Barley Twists & Straight FlutingsSpecifications: -- Maximum workpiece diameter 200 mm (7.87"), Maximum milling length 1,650 mm (64.96").Equipped with: -- 24-Position Indexing plate.Complete with: -- Legs.NOTE: No Router.Dimensions: 81" x 19" x 48" H.Weight without Legs: 110 Lbs.

This Kimwood Panel Master Sander is in good working/running condition and it is ready to load! - 48" Feed - Feed speeds up to 200 lineal feet per minute - (2) opposing heads - 250HP - (2) operator control panels - Many spare parts including sanding belts

Table Configuration: • KOMO VR 512 Mach I CNC Router • 60 x 144" Cast aluminum machined vacuum table • Table has been designed for High Flow vacuum pump • Ideal for nested based manufacturing • Heavy Duty fixed Gantry Bridge • A-Frame style Gantry Support legs • Pop up part locating pins (set of three pins) Head Configuration: • 12 HP High Frequency 4-pole Router Spindle • Programmable spindle speeds from 9,000 - 18,000 RPM • 8-Position Dynamic tool changer with BT-30 tool holders • (6) Vertical drill spindles on 32 mm centers • (4) Horizontal boring spindles with 1 + 1opposing in the X-axis and 1 + 1opposing in the Y-axis Positioning: • All axes are positioned by AC Servo Drives • Heavy Duty Profiled machine rails and bearing trucks • Preloaded precision ball screws for positioning • Automatic Lubrication system to all bearings • Rapid travel speeds of 1,250 IPM on both the X and Y-axes • Travel speeds of 600 IPM on the Z-axis Controller: • FANUC 210i PC Front end Controller • Windows Operating system • RS-232 Serial interface • 3-axis simultaneous control • Feed rate override • Spindle speed override • Hand help pendant • Remote operating pedestal with vacuum and cycle start buttons, pop up pins, as well as emergency stop.

Komo VR512 CNC Router Fanuc Controls SN 24129-03-01-93 Quincy Vacuum Pump