Woodworking Equipment For Sale
1785 Results Found
$ 12,750
COMEVA - CUBE 3, ...Edgebander (Single Phase)The CUBE 3 from COMEVA is designed to be a very compact "every day" Edgebander. The CUBE 3 Edgebander is operated through a PLC control system with a touchscreen. The machine handles panel thicknesses of 0.315" up to 1.77" (8 mm to 45 mm), The coil feed accepts Edgebanding from 0.4 mm to 2 mm thick; strip material can be hand-fed.Equipped with: -- Heated infeed fence for optimum glue penetration. Large capacity Teflon coated glue pot (2.64 Lbs). -- Single motor End Trimming station -- Top & Bottom Trimming -- Top and bottom Buffing. -- Feed speed is variable between 9.8 & 23 FPM (3 - 7 MPM); feed chain pads with replaceable rubberized surface inserts. -- Rubberized holddown rollers with ball bearings for low friction and long life. Work stations: -- Pneumatically operated guillotine for up to 2 mm thick banding, followed by spring loaded double pressure rollers. -- Single front/rear trimming unit, 0.3 HP motor. -- Top & Bottom trimming units, (2) 0.5 HP motors. -- Top & Bottom buffing station, (2) 0.16 HP motors. -- Complete with: Safety enclosure protects the operator from noise and debris. Engineered & Manufactured by COMEVA S.L, in Spain.Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts.
Call for Price
--at Auction, Seller Loading, Excellent Condition!-- COMEVA C-500 Automated Machining Center for Entry Doors A robust and solid construction Gantry style flexible Door Machining Center, which will machine Hinges/Locks on doors, and other similar operations. Horizontal heads (lock and hinges) on each side work simultaneously for faster cycle times. Left horizontal group with movement that permits milling of classical hinges and the European ANUBA "Drill-in" hinges. The vertical group makes holes for crank (handle) and for standard locks, security, electronic lock for hotels, and also performs other milling/grooving operations on the top side of doors. - Working dimensions: 1,100 x 2,350 x 60 mm (43.3" x 92-1/2" x 2.4"). - Working Heads: (2) Horizontal Routers: Fine + Rough; mounted on the side of the table for mortising the hinges, and (1) horizontal router, pointing in the other direction, for the locks mounted on the gantry. (1) Vertical Router mounted on the gantry for the door lock handle, etc. - Drives: (1) Horizontal head for locks; 2.2 kW (3 HP) motor; (2) hinge mortise motors of 0.37 kW (0.5 HP); (1) 1.5 kW (2 HP) on Vertical Router head. All are supplied with high frequency drives. - Operator Control Panel: Separate control console with touchscreen and easy/intuitive programming with the main Macros preinstalled. Features automatic calibration and detection of the door size for correction on dimensions. - Overall dimensions 3,050 x 2,100 x 1,750 mm (120" x 82.7" x 69"). Weight: 1,800 kG (3,960 Lbs). - Includes: Automatic door feeding system double belt strips, gear motor powered. NOTE: - This machine does not include the fixturing device for the frames/jambs, but it can be ordered/retrofitted accordingly if needed. - Engineered & Manufactured by COMEVA S.L, in Spain.
$ 500
--AT AUCTION-- COMEVA CUBE 3 Compact Edgebander, Single-Phase, Showroom Model – New, with Warranty! The CUBE 3 from COMEVA is designed to be a very compact "every day" Edgebander. The CUBE 3 Edgebander is operated through a PLC control system with a touchscreen. The machine handles panel thicknesses of 0.315" up to 1.77" (8 mm to 45 mm), The coil feed accepts Edgebanding from 0.4 mm to 2 mm thick; strip material can be hand-fed.
Call for Price
Minimum working height: 11.81" Maximum working height: 48.03" Minimum working length: 11.81" Maximum working length: 98.42" Minimum working depth: 9.84" Maximum working depth: 39.37" Workable table height: 19.68" After preassembly operator starts movement cycle -Dimensions of the cabinet which are fed into the machine are detected by the photocells and transmitted to the PLC, which controls positioning and automatic clamping of the horizontal pressure bars on the unit-holder beam. -Vertical clamping section positions in the same manner -When the cabinet has reached the horizontal contact units it is held in perfect alignment and the pressing cycle starts as set by the program -At the end of the cycle the horizontal cross beams are raised to allow the clamped cabinet to be removed and to allow the next cabinet to enter All the controls are located on the machine Timing of the clamping cycle is programmable PLC controls the reading of the dimensions of the parts and the positioning of the motor driven parts The machine can be used in automatic or manual mode Modification of the cycle starting function, feed-stop, resetting and emergency functions can be activated by means of push-buttons Overall machine dimensions: 18` long x 6-1/2` wide x 12` tall -Machine weight: 6,400 lbs
Call for Price
--at Auction, Seller Loading, A lot of air flow value for the money!-- COMPAIR / LEROI WM-100SS II WQ 100 HP Rotary Screw Air Compressor Specifications: Main motor: 100 HP Working pressure: 125 PSI Capacity: 445 CFM NOTE: THIS MACHINE REQUIRES AN EXTERNAL COOLER Note: This machine has (21,311) hours on it.
CONCEPTION CRP-180 Short Block Feeder Infeed ConveyorSpecifications: -- About 4 m long X 1.2 m wide, 2-ply rubber belt, friction back with Photocell for automatic operation -- Short Block Feeder; Blocks to be 25mm longer than width -- 14' rotating carousel with adjustable speed via VFD with Motorized wheel to avoid blockage -- Exit opening adjustable to the block width -- 200 mm x 7m long belt conveyor to carry the blocks to index rolls; Servo indexer controlling the flow powered by an electric motor; Speed-up belt powered by an electric motor -- Wane System: Scanner to detect wane integrated in conveyor -- Display screen to show wane detected; Kicker to kick blocks that are not in good orientation -- Conveyor to return it into the spreader belt conveyor -- Automatic Operations
CONQUEST 1-23H CONSTRUCTION / LINE BORERUSA-Made 46-spindle Horizontal/Vertical Boring Machine.Specifications: -- (2) 2 HP BALDOR Motor to drive a helical gear head with spindles on 32 mm centers. One head with (23) Spindles in the vertical plane and One head with (23) spindles in the horizontal plane. -- Pneumatic head movement to reduce operator fatigue. -- 20-1/2" x 36" Cast iron front table.Complete with: -- 98" Back fence with repeat stops. -- (2) Pneumatically operated index pins & (2) pneumatically operated holddowns. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank. -- Foot pedal control....$150.00 crate charge.
CONQUEST 1-23H Horizontal 32 mm Boring Machine;Specifications: (1) 23-Spindle horizontal boring head, 2 HP "BALDOR" motor, helical gear driven spindles spaced on 32 mm centers, 3,450 RPM; cast table. -- Equipped with: Pneumatic head activation, side fences. -- Complete with: (2) Pneumatically activated holddowns and foot pedal. NOTE: This unit has 2 sets of arms. All the screws have been replaced for the drill bits. Ready to go to work!
Call for Price
Model-A42-BLO-C.T. sn#002-6-99, with or with out the electric motor, 6 paddle 10" inlet-12"outlet, some wear, in working condition, CALL 740-978-8324
$ 20,000
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
$ 24,700
COSTA - ACCT1350, ...3-Head Wide Belt Sander 53" Width cap.; Drum, Drum, and Platen.Head Configuration:1st Head: Rubber covered contact roll, 9.8" dia., 30 HP motor.2nd Head: Rubber covered contact roll, 9.8" dia., 25HP motor.3rd Head: Polishing platen "jump type"; pneumatically controlled with timers to eliminate any dubbing of leading or trailing edges on panels; 20 HP motor.Specifications -- Contact rolls with pneumatic "grit-set" thickness control with a 4-position turret actuated from the control panel (this adjusts the contact roll for varying thickness of abrasive belts). -- 53" x 103" Abrasive belt length with electronic tracking; --Motorized part thickness opening on conveyor bed, 1/8" - 6 max. thickness opening. --2-Speed conveyor belt feed from 16 - 33 FPM --Vacuum conveyor bed assemblyEquipped with & Features --Thin veneer" sanding package with floating or rigid bed with infeed & outfeed spring loaded holddown shoes. --Oscillating sanding belt cleaners with timed entry -- All motors with Y-Delta starters, motor load meters --Infeed & outfeed conveyor extension tables with rollers, and (3) 6" OD. dust outlets.
$ 49,500
COSTA - AKF-CT-1350, 2-Head Wide Belt (Veneer) Sander52" Width cap.; drum & segmented platen.Head Configuration:1st Head: Rubber covered contact roll.2nd Head: Electronically controlled segmented platen with (42) segments on 32 mm increments.Specifications: -- 1st Head: Rubber covered contact roll 75 shore, 30 HP motor; features 4-position revolving turret for abrasive grit size setting. -- 2nd Head: Electronically controlled segmented platen with (42) segments, powered by 20 HP motor and variable speed by electronic inverter control; with reverse rotation. -- Abrasive belts: 1,380 mm x 3,250 mm (54" x 128"). -- Air blast abrasive belt cleaning. -- Pneumatic belt tensioning with electronic tracking.Equipped with & Features: -- PLC Processor Control. -- Floating feed table + Quick Set. -- Vacuum assist holddown. -- Variable feed speed belt conveyor, powered by 5.5 HP (4 kW) motor. -- Infeed & outfeed spring-loaded holddown shoes on all heads. -- Powered raise & lower conveyor bed with LED readout. -- In- & outfeed roller table extensions and motor load meters.
$ 67,500
COSTA - KK CC-CCC 1350, ...5-Head Top & Bottom Wide Belt Sander.53" Width capacity; (2) Bottom drums, (3) Top drums.Bottom Machine: -- Constant pass line height: 1,000 mm (39"). -- Motorized infeed conveyor. -- Motorized infeed pressure rollers. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder ,16" dia., 35 kW motor. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd & 3rd Heads: -- Rubber covered cylinder, 16" dia. (2nd head), 52 kW motor (3rd head), 88 kW. -- Outfeed pressure shoe with lip and rubber covered rollers. -- Vacuum Feed Table: 10 HP (7.5 kW) motor. -- Vacuum set pneumatic for (2) levels of vacuum pull control.Top Machine: -- Infeed roller. -- Motorized infeed pressure rollers. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder, 16" dia., 35 kW motor. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd & 3rd Heads: -- Rubber covered cylinder, 16" dia. (2nd head), 52 kW motor (3rd head), 88 kW -- Outfeed pressure shoe with lip and rubber covered rollers. -- Vacuum Feed Table - 10 HP (7.5 kW). -- Vacuum set pneumatic for (2) levels of vacuum pull control..Equipped with and Features: -- All drives are equipped with disc brakes. -- Each Sander with vacuum feed belt with fans..