Woodworking Equipment For Sale

Specification from owner 2007 Black Brothers 775-56” Top and Bottom Glue Spreader with an extra-large 12.5” opening designed for SIP (structural insulated panels) manufacturing. This machine is brand new and ready for immediate delivery. 575V, 3PH

BLACK BROTHERS TOP AND BOTTOM 775- HOT MELT Glue Spreader with 32" working width.7-3/4" Heated Adhesive applicator rolls, with flow controlled by Chrome Doctor rolls. -- Single speed feed drive motor, operating at approximately 88 FPM. -- It has a 32″ width capacity and a 5-1/2″ thickness capacity. -- The doctor rolls are in very good condition. The price listed reflects that the 2 applicator rolls need to be re-covered. Or we can have them recovered for you for an extra cost and re-install. Please contact us with your specifications as we do not recover rolls until a machine is sold as these machines are very application specific. Meaning type of material which is usually silicone or a blend and durometer.This Model 775 has been cleaned and checked, and it heats up, and runs as it should.

Complete BLACK BROTHERS COLD PRESS LAMINATING LINEWith BLACK BROTHERS APP PL 5 X 12, 50 PSI END LOADING FIXED AIR POD PRESSInfeed Scissor Lift, Panel Pusher, Panel Cleaning Brush, Glue Spreader, Stack-building Sissors-lift, Laminate Rack over conveyor, stack staging and press loading Conveyor, and Cold Press. -- Station 1: PNEUMATIC PANEL FEEDERPanel Pusher feeds individual panels from side loaded (w/forklift) scissor lift into panel cleaner. Photo electric eye activates arm that pushes panel into panel cleaner.Pusher arm: to feed panels into machine on demandSwitch: for remote mountingPass Line: 44"24" Stroke with 4' of adjustment: to feed panels from 1/211 thick, up to 250#, in lengths of 8', 10', or 12'Controls on (Left or Right)NEMA 12 Enclosure with main power disconnect switch and over-current protection: (230 or 460) Volt, 3 Phase, 60 Hertz, 24 VDC Control CircuitsDual Limit Switch Arrangement: to control the Scissors Lift with "hand/auto" selector and a Barrier Guard to prevent double board feed. -- Station 2:SCISSORS LIFT 36" Vertical Travel foot operated raise/lower switch48" X 120" Plain Deck with 6,000 Lbs CapacityInternal Pump 460 Volt, 3 Phase, 60 Hertz, 24VDC Control CircuitsPin Adjustable Edge Guides, mounted on SLAnchor Clips for mountingTransverse Conveyors with air brake to allow loading or unloading from side. -- Station 3:MIDWEST AUTOMATION PC160 Panel Cleaner with 63" Working width capacity, (2) spiral type cleaning brushes, 0" to 3" thickness opening, single end adjustment with roll opening (scale-type) indicator;Variable feed speed 30 - 150 FPM with 1 HP - 1,725 RPM drive, (2) 6" dia. infeed and (2) 6" dia. outfeed rolls, variable brush speed with 3 HP motor. Equipped with: All guards, dust hoods, and magnetic starter. -- Station 4:BLACK BROTHERS 775 TOP & BOTTOM ADHESIVE SPREADER, 68" Application: To apply water base adhesive to top and bottom Particle board, plywood and MDF substrateUpper Elevator: 0 to 4-1/2" OpeningRoll Opening Indicator: shows opening between rolls in .001 incrementsRiser Base: 44" pass line heightCaster Arrangement: (4) plain rigid casters with guide track and lockCoating Rolls: (2) 7-3/4" Maximum O.D., 60 Durometer - Neoprene/SPR, Grooved: 16 TPIDoctor Rolls: (2) 7" Maximum O.D., 100 Durometer - Ebonite, Ground Smooth Single Hand-wheel Doctor Roll Adjustment with mechanical digital read-out. Electrical Interlocks on nip-guard(s)NEMA 12 Enclosure with main power disconnect switch and over-current protection.1-1/2 HP Single Speed with 3" reverse Lockout 88FPMPivoting In-Feed TableOperating Hand-wheels & Controls: Parallel to direction of flow on right Motor On Left EndOperating Control BarsLiquid Level Control: FIBER OPTICMachine Mounted Double Diaphragm Pump: l" Ports, Aluminum body with Neoprene diaphragm Feed Lines:Automatic Roll Cleaning Arrangement -- Station 5:Hydraulic "Conveyo-Lift" with conveyor roller top; as board leaves the spreader, person on each corner guides the panel over the laminat

48" wide Black Bros UV Curing Oven

BLACK BROTHERS 22-D-1175-80 Glue Spreader (TOP & BOTTOM)Specifications: -- 80" Working width with 11-3/4" dia. Smooth EPDM coated rolls, 8-1/2" dia. EPDM coated doctor rolls. -- Upper elevator opening 0" - 4-1/2", 2 - 3 HP Variable speed drive, target feed speed of 20 FPM; Nema-12 electrics. -- Complete with: Push button magnetic starter, safety guards, and reversing bar.LITERATURE PHOTO - Not actual equipment offered, for reference only.

RECONDITIONED BLACK BROTHERS 22-D-500 26 IN. TOP AND BOTTOM GLUE SPREADER -- 5" dia. Grooved Neoprene covered application rolls (16 TPI), flow controlled with 3-1/2" dia. Neoprene doctor rolls -- Top elevator opening 0" - 3-3/4" w/manual adjustment and roll opening indicator. -- Operating control bars infeed and out feed. -- Single speed drive at 67 FPM. -- Includes: All guards and safety equipment.

BMT B 700 Pin Router referbished in 2010

Boarke 43" 2-Head Sander

37” Capacity single head 230 volt 3phase

Boarke BKM-43103RRK (3) Head 42″ Wide Belt Sander (3 NEW DRUMS)43" Width cap. Drum, Drum , PlatenHead Configuration1st Head : 30 hp, 10″ Helical grooved drum,2nd Head: 25 hp 10″ helical grooved drum,3rd Head: 20 hp helical grooved (idler) with a platen. Specifications -- 42″ width capacity, a 5″ height capacity running -- 43″ X 103″ abrasives. -- First head is a 30 hp, 10″ Helical grooved drum, -- Second head is a 25 hp 10″ helical grooved drum -- Third head is a 20 hp helical grooved (idler) with a platen. -- First and second heads have dial indicators to dial in abrasives. It does also have the optional 5 hp vacuum feed bed.Equipped with & Features -- The feed is variable from 7-45 FPM via a 2 hp motor and has a VFD for the speed control. -- The feed mat is thick and has the usual crazing but has plenty of life. -- Elevation is handled by a 1/2 hp motor. -- This machine does have a digital read out and touch pad control combined with an auto thickness calibration unit on the right.

Manufacturer’s Specification ( to be confirmed) - With its powerful 3 HP motor can delivers the performance professional demand. - Coupled with an industrial quality eccentric oscillation mechanism that delivers more efficient sanding, less tendency to burn and less belt loading. - Heavy duty spring system allows easy adjustment for the front aluminum table for full use of the abrasive surface. - Aluminum auxiliary contour table allow use of 4” idler roller as a drum sander. - 9” Dia. Drive drum, 4” Dia. Idler drum. - 9-1/2” x 48” cast iron platen with graphite pad. - Rugged bearing – assisted belt torsion devise.. - Aluminum table travels 8” and tilts – 5 to 45 degree. - Dual 4” dust ports. Belt speed: 4200 RPM - Sanding belt oscillate distance: 1/4” (6 mm) Motor5HP / 220V / 60Hz Belt Size230 x 3520mmn Frint Table Size (L x W)1210 x 300mm Dust Port 4”

50” width drum/drum/platen heads 480 volt 3-phase Bottom and top sanders can be sold separately Pictures coming for bottom sander

BOERE - TKS 900, ...2-Head Top Wide Belt Sanding Machine900 mm (36") Working width; equipped with: (1) Contact roller, (1) Fine sanding pad. Head Configuration -- 1st Head: Rubber contact roller, spirally grooved, Shore hardness 80, diameter 265 mm (10.4"), driven by 18 kW (25 HP) motor. -- 2nd Head: Sanding pad, electronic-pneumatic controlled, 114.7 kW (20 HP); Air blowing unit for cleaning the abrasive belt. -- All heads use abrasive belts size: 910 x 1,900 mm (35.8" x 74.8").Feed System -- Variable feed speed: From 5 - 25 MPM (16 - 82 FPM); 1.5 kW (2 HP) motor. -- Motorized part thickness opening: 3 - 150 mm (0.1" - 6"), driven by 0.12 kW (0,15 HP) motor.Complete with: -- Emergency Stop Systems for abrasive belt breakage and low belt tension. -- Infeed safety bar for operator protection and oversized parts. -- Automatic Star Delta starters, motor load meters. -- Pneumatic belt tension. -- Emergency Stops at the front & back. -- Extended infeed belt, approx. 42" long.Actual model: BOERE "TKS 900".

BOERE - TPK-900, ...Planer Sander with (2) Heads -- 2-Head, 900 mm (36") width cap.; -- Equipped with (1) Knife planer head and (1) Rubberized Drum. -- 1st Head. Helical knife planer head with: (4) Spirals of 4-sided carbide inserts, each 14 mm x 14 mm; 20 HP motor. -- 2nd Head. Drum approx. 10" dia. rubber covered contact roll; 15 HP motor; all heads with air-operated caliper disc brakes. -- Variable feed speed: 13 - 52 FPM; 2-1/2 HP motor; automatic conveyor belt tracking; -- Anti-kickback fingers on infeed; infeed hold-down shoes' double outfeed pinch rolls on outfeed. -- Motorized part thickness adjustment: 0" - 6"; LED readout display. Complete with: -- Controls are mounted on the belt loading side, load meters for each head, and conveyor infeed extension.

Great Condition Recently Fully Serviced Profile Scrapers and Surface Scrapers No Premill/No Buffers

BRANDT AMBITION 1110 (KDN 110) EDGEBANDER: -- Specifications:0.4 - 3 mm (1/8") Edge thickness cap.; 8 - 40 mm (0.3" - 1.57") panel thickness; 60 mm (2.3") min. panel width; 140 mm (5-1/2") min. length.Equipped with: -- Infeed fence: Adjustable; manual with digital indicator. -- Gluing System: Hot-melt; quick heat-up time; easy maintenance. -- Edge Magazine: Automatic for strip & coil stock; 3 mm PVC guillotine. -- Side Pressure Section: (1) Driven plus (2) idle rollers w/digital readout setting.Workstations: -- End Trimming Unit: Double-motor end trim; (2) x 1/2 HP - 12,000 RPM motors; chamfers 0° - 15°. -- Multi-Trimming Unit: Top/Bottom for flush/bevel/radius trimming; (3) quick setting positions; motors: (2) 1/2 HP - 12,000 RPM; with insert knives. -- Buffing Unit: Top/Bottom; (2) 1/2 HP motors. -- Scrapping Unit: Top/Bottom Scrapping UnitControls:LCD Display: Approx. 2 x 6" with soft keys for fast navigation and operator comfort. Complete with: -- Feed Speed: Fixed; 8MPM (26 FPM); 3 HP feed drive. - Sound enclosure and Scraper collection box. -- Actual Model is BRANDT AMBITION 1110 (KDN 110).

BRANDT KDF 110 (AMBITION 1110) EDGEBANDER WITH PRE-MILL0.4 - 3 mm (1/8") Edge thickness cap., 8 - 40 mm (0.3" - 1.57") panel thickness, 60 mm (2.3") min. panel width and 140 mm (5-1/2") min. length.Equipped with: -- In-Feed Fence, adjustable, manual with digital indicator. -- Pre-Milling Unit, (2) motor, (1) jump, counter rotating for the best possible glue joint. -- Gluing System, hot-melt, quick heat-up time and easy maintenance. -- Edge Magazine, automatic for strip & coil stock, 3 mm pvc guillotine, -- Side Pressure Section, (1) driven plus 2-idle roller w/digital readout setting.Workstations: -- End Trimming Unit, double motor end trim (2 x 0.5 HP - 12,000 RPM motors), chamfers 0° - 15°. -- Multi Trimming Unit, top/bottom for flush/bevel/radius trimming with (3) quick setting positions. Motors (2 x 0.5 HP - 12,000 RPM) with insert knives. -- Buffing Unit, top/bottom (2 x 0.5 HP) motors. -- NOTE: Open station at end; scraping unit could be addedControls:LCD Display, approx. 2 x 6" with soft-keys for fast navigation and operator comfort. Complete With: -- Feed Speed, fixed 8 m/Min (26 FPM), 3 HP feed drive. Sound enclosure and Scraper collection box.Actual Model: AMBITION 1110

Brandt Ambition 1110 Edgebander

Brandt 1100 Edgebander Seller closed shop about 1 year ago and put this in storage. Claims they were using the machine up until they shut down.

BRANDT AMBITION 1200 (EDGEBANDER WPRE-MILL & CORNER ROUNDING): -- Specifications: Edge & Workpiece Capacity, 0.4 - 3 mm Edge cap., min. panel thickness 8 mm (0.3"), max. panel thickness 40 mm (1.57"), min. panel width 70 mm (2.75"). Min panel length: 140 mm (5.5")Line control (NO limit switches) for workstation function. Automatic height adjustment with top pressure beam for all workstations. Auto in-feed stop to insure proper spacing between panels. Equipped with:Pre-Milling Station:(2) motors @ 0.75 kW (1.0 HP) ea., 12.000 RPM, LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges. Equipped with diamond cutter heads. -- Gluing Section:Automatic magazine for strip & coil (large coil table 800 mm diameter to accommodate large coils of 3 mm PVC) stock, 3 mm PVC guillotine, Pressure Section with (1) large drive plus (2) idle rollers "pneumatically controlled." Hot Melt granulate quick heat-up glue system. Workstations: End Trimming: 2 x 0.18 kW (1/4 HP), 12,000 RPM motors, THK guided, chamfers 0° - 15°. -- Flush/Bevel/Radius Trimming:2 x 0.55 kW (0.75 HP),12,000 RPM motors with insert knives for 3 mm PVC radius. cutter-heads, bevels 0° - 15°. -- Corner Rounding Station:1-Motor (4-corners) contour trim for profile corner rounding, 1 x 0.35 kW (0.5 HP), 12,000 RPM motor, with insert knivesFor 3 mm PVC radius w/digital read-out set-up and pneumatic change-over from thin to thick PVC edge tape. -- "Quick-Change" Profile Scraping Unit:Top & bottom for 2 - 3 mm radius, pneumatically controlled blow-off nozzles. -- Flat Scraping Unit:Top & bottom flat scraping units with copy wheels to remove residual glue squeeze-out.Operator & Machine Control: "ECO Plus Control", easy operation with simple menu format; large LCD display and integrated line control via keypad.Production readiness displayed by traffic light indicator with ability to adjust units quickly thanks to direct access via ctrl keys. Intuitive, user-oriented navigation with a clear overview of the help and assistant functions, including the glue pot temperature or troubleshooting in plain text. -- Complete With: &#9679 Trim stations have HF motors w/electronic brakes &#9679 Fixed feed chain track speed of 8 MPM (26 FPM) &#9679 2 HP feed drive &#9679 208/230/440/480v, 3ph Transformer &#9679Sound/Safety Enclosure &#9679 Adjustable Out-Rigger Support &#9679 Used tooling. -- Actual Model is BRANDT AMBITION 1200.