Woodworking Equipment For Sale

WEEKE VENTURE 106M (BMG 111) CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Capacity: "X" Axis is 123.2" (3,130 mm); "Y" axis is 61.02" (1,554 mm); "Z" axis stroke is 7.2" (185 mm); max. material thickness 5.9" (150 mm). -- Positioning Speed: "X" & "Y" Axis travel speed of 262 FPM (80 MPM); "Z" axis travel speed of 66 FPM (20 MPM).The machine head travels on THK linear motion guides on all axes. -- Worktable:(6) Movable K-Table support rails with: Side mounted raise-and-lower panel feeding rails; (2) vacuum pods per rail.(6) Pneumatic backstops; (2) pneumatic side stops create (2) working zones.Laser Positing System setup assistance for precise rail & vacuum pod positioning. -- Boring Unit:3 HP (2.3 kW) Motor; variable speed from 1,500 - 7,500 RPM; (12) vertical "QUICK-CHANGE" drill spindles: (7) Spindles in "X" axis & (5) in "Y" axis.(6) Horizontal spindles with: (2 + 2) In "X" axis & (1 + 1) in "Y" axis. -- Machining: (1) 12 HP (9 kW) Air-Cooled electrospindle router with: HSK F63 Adaptor with: Programmable 1,250 - 24,000 RPM; constant torque from 9,000 - 24,000 RPM; RH or LH rotation; powered by a frequency inverter.(1) 8-Position ATC magazine located at the RH side of the machine. -- Operator & Machine Control: WEEKE IPC "PC 85 Power Control" + Windows "XP" + WoodWOP 6.1 Operating System; INTEL Core2 Duo Processor; "BECKOFF" PLC for (3) axes with: Linear, circular, & helical interpolation.17" TFT Monitor with: 2D / 3D "REAL-TIME" graphics; industrial keyboard; mouse for data entry.(1) SATA Hard drive; 160 GB; central USB front side bus connection; Ethernet connection 10/100 Mbit; all mounted in separate free-standing Control Panel. -- Complete with:(1) 84 cbm/Hr Vacuum Pump: 3-Zone safety mats (will stop machine if operator enters the active work area); safety fences; scrap conveyor; handheld pendant controller. -- Actual Model is: WEEKE VENTURE 106M / BMG 111.

WEEKE BHX 500 OPTIMAT CNC MACHINING CENTER (2-HEAD):Specifications -- Flexible "TOP & BOTTOM" Machining Center that uses an innovative panel handling system. -- Working CapacityMax. workable part size: "X" Axis is 98.4" (2,500 mm); "Y" axis 39.3" (1,000 mm); max. material thickness 3.1" (80 mm).Min. workable part size: "X" Axis is 7.8" (200 mm); "Y" axis 2.7" (70 mm); min. part thickness 0.157" (4 mm). -- "BHX 500 OPTIMAT" Positioning Speed can reach movement speeds of: 452 FPM (138 MPM) in "X" axis; 262 FPM (80 MPM) in "Y" axis;164 FPM (50 MPM) in "Z" axis; with total safety, providing an unmatched working capacity. -- Worktables:Automatic LH air floatation infeed table; automatic RH outfeed transfer conveyor with belts; both infeed & outfeed are "Robot Ready". -- Boring Units:(1) Top mounted boring block; 3-1/2 HP (2.7 kW); variable speed from 1,500 - 7,500 RPM; (32) vertical spindles with "QUICK CHANGE" drill bit adaptors.(1) Bottom-mounted boring block: 3-1/2 HP (2.7 kW); variable speed from 1,500 - 7,500 RPM; (32) vertical spindles with "QUICK CHANGE" drill bit adaptors. -- Machining Units:(1) Top-mounted 8 HP (6 kW) Router spindle with: "ETP" 25 "QUICK CHANGE" Hydro-Chuck adaptor; 1,200 - 24,000 RPM with RH rotation. (1) Bottom mounted 8 HP (6 kW) Router spindle with: "ETP" 25 "QUICK CHANGE" Hydro-Chuck adaptor; 1,200 - 24,000 RPM with RH rotation. -- Sawing Units: (1) Top mounted NC Controlled 0° - 90° "X /Y" grooving saw; 3-1/2 HP (2.7 kW); 7,500 RPM; max. saw blade dia. 125 mm.(1) Bottom mounted NC Controlled 0° - 90° "X /Y" grooving saw; 3-1/2 HP (2.7 kW); 7,500 RPM; max. saw blade dia. 125 mm. -- Operator & Machine Control:WEEKE "PC85T Power Control" + Windows "XP"+ WoodWOP operating system; 17" TFT monitor; international keyboard, soft touch keypad & industrial mouse.RS-232 Serial ports; USB ports; (1) 1.44 MB floppy disk drive; (1) CD -ROM, modem; all mounted in a separate control console. Real time multitask processing; programs can be transferred via diskette or downloaded by wire. Built-in 1,500-Watt air conditioner for constant temperature & dust-free environment. -- Complete with:Pneumatic part clamping devices; sound enclosure and complete set of safety fences/devices. -- Machine Features: The machine can work the panel from above & below at the same time and can produce (2) identical or mirrored panels per cycle with no difficulty.The "BHX 500 OPTIMAT" can also machine porous materials since the pieces are held with grippers directly managed by the numerical control; it can even process small pieces and carry out "through" machining.(4) Operating modes at each cycle, it can change automatically from top machining to bottom machining, to top & bottom machining together, either on (1 or 2) stacked panels. -- Actual Model is WEEKE BHX 500 Optimat

Good Condition 230V 60Hz

Weinig Profimat 22 N Moulder Work ready

Weinig R960 Profile Grinder Measuring Stand Complete tooling room included!

Weinig Unit 318 Moulder 9" Machine 6-Head Low hours! Also available: Weinig R960 Grinder and tool room

Manufacturers Specifications tool diameter: 100 - 300 mm tool width: max. approx. 230 mm motor / grinding disc drive: approx. 1,1 kW free angle, adjustable 15 - 35° drive for coolant pump: approx. 0,065 kW tank capacity: approx. 90 l

2002 Weinig U23E 5-Head Moulder 2021 Doucet MFE-150-12 Infeed System This system is still in production and ready to be loaded out.

WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.

Weinig R950 Profile Grinder

Weinig Rondamat 934 Grinder

Weinig U22N Moulder 7 head Mid 80s Freshe rebuild

Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room

This entire listing is being sold as one lot. 1997 Weinig U23EL 6-Head Moulder with infeed and outfeed decks 2000 Weinig R960 profile Grinder with Weinig 970080 Opticontrol Stand TF-900 Resaw Precision 281 chop saw Precision 281 RH chop saw Shanklin F2 wrapper Damark STR 16ADD heat tunnel Ogam 280 Rip Saw

1978 Weinig 7 Head Moulder S/N 2816/2248

Weinig Powermat 700 Moulder Measuring stand, tooling and spare parts as pictured Never connected to power...ready to load!

Weinig Powermat 1000 Year: 2006 Condition: very good, taken out of service in April 2024, operating at full production at that time. Several wear parts have been replaced in the last year and service by Weinig technicians. Sale includes $29,000 of new parts not yet installed. Machine information: 6-Head with HSK spindles (B,R,L,T,T,B) 12,000 RPM Capacity: 9-1/16" x 4.75" Weinig PowerCom touch screen control Feed: 62 FPM

WEINIG Powermat 1000 7-Head Feed Trough Moulder(B-R-L-T-T- B-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 40 HP , Bottom 30 HP, and Universal 15 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements.Spindle arrangement: -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM, universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; -- Adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement.Feed System: -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter-controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: -- Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- The safety hood, automatic table lubrication pump, and (2) lights inside the reinforced sound enclosure are electromagnetically interlocked, as is the phone modem..

1st Head – Bottom– 40mm spindle – 11kw 8,000 RPM • Electronic digital display for radial adjustment Marathon Coating Table plates 2nd Head – Right – 40mm Spindle – 11kw 8,000 RPM 3rd Head – Left – Powerlock Spindle – 15kw 8,000 RPM Pressure shoe in front of left tool holder, incl. 2 lateral Pressure rollers, pneumatic. Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after Left tool holder incl. electronic digital display. 4th Head – Right – Powerlock – 11kw 8000 RPM 5th Head – Top – Powerlock – 15kw 8000 RPM Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after Upper tool holder incl. electronic digital display Split pressure shoe in front of upper tool holder, pneumatic Oscillating axial adjustment 6th Head – Top – Powerlock – 11kw 8000 RPM Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after Upper tool holder incl. electronic digital display Split pressure shoe in front of upper tool holder, pneumatic Oscillating axial adjustment 7th Head – Bottom – Powerlock – 11kw 8000 RPM 8th Head – Right – Powerlock – 11kw 8000 RPM An additional pressure roller from above opposite 3rd right Tool holder, swing away for easy Tool change, pneumatic 9th Head – Left – Powerlock – 11kw 8000 RPM Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after left Tool holder incl. Electronic digital display. Frequency controlled feed, 11 KW (6-36m/min 5 meter in-feed table Automatic lubrication pump Two driven rollers in the machine table, hardened Pressure rollers from above, pneumatic PowerCom Plus Software CNC controlled adjustment and positioning. Axial CNC – controlled adjustment and positioning of the Tool holders in connection with the Memory function or PowerCom. For tool holder no. • 2,3,4,5,6,7 Radial CNC – controlled adjustment and positioning of the Tool holders in conjunction with the memory function or PowerCom. For tool holder No. 3,4,5,6,7 CNC – controlled adjustment and positioning of the feed Automatic central lubrication of the oscillating Tool holders Two interior lights in the safety hood Comes with new Transformer.

Weinig Unimat 22AL Electrical Panel