Woodworking Equipment For Sale

Industrial Woodworking JFS25 Finger Joint Line Ultimizer Saw Ap-Quip glue system Ace-Co Hydro heads and setup stand.

24" x 96" belt with 28" wide opening into oven Dayton gear drive with 1/2 HP DC motor 230 volt UV unit 96" x 42" x 71" overall dimension

12" blade 7-1/2 HP motor (3 Phase) Foot pedal control Left hand machine

Ingersoll Rand Air Compressor 3 phase 10 hp Work ready

Interwood B3223 Boring Machine 23-Spindles Manufacturer Specs (to be confirmed): (2) 1.5kw, 220/380v, 3ph motors (2) banks of (23) drills 32mm drill spacing (8) spring hold downs (2) pneumatic locators 50-1/2 inch x 30 inch table Pneumatic operation / foot pedal

INTOREX TX-1600 Hydraulic Copy Lathe Hopper Feed. Overall Specs: -- Full automatic, equipped with (2) hydraulic copiers, (2) tool holder units, (2) back knives, Hopper Feed, Automatic Loading System. and electronic PLC control. Carriage runs on ball screw and tempered/ground guides. -- 1,600 mm (63") Max. between centers; hopper loading capacity of 140 x 140 mm (5.5" sq.) in automatic cycle and 210 mm (8.3") diameter in semi-automatice cycle. -- 10 HP Main motor with a variable speed of 730 - 5100 RPM; 3 HP hydraulic power pack. _ Fitted with PLC programmed logic to assist in setup; All working units (advance carriage, tailstock, tool holder units, etc) are hydraulically powered with independently adjustable speeds. -- Copying system with (2) hydraulic copier knives and traveling steady rest; includes a pre-rounding knife in front of steady; hydraulically powered back knives for doweling or plugging with form tools. -- Includes: Tooling, front safety guard; front mounted electrical panel with easy access to all pushbuttons and controls, and LED RPM display.

Ironwood S135 MRK Wide Belt Sander Manufacturer specs: 52” Triple head wide belt sander. Head # 1 is a helical planer cutterhead - 150 mm diameter with 30 x 12 x 1,5 mm carbide inserts - Height adjustable with dial indicator - Forty (40) horse power motor - Poly-v belt drive Head #2 is a rubber contact roller - 250 mm diameter 85 shore profiled rubber contact roller - Height adjustable contact roller with dial indicator for grit compensation - Twenty (20) horse power motor - Poly-v belt drive - Cutting speed of 20 mps (65 fps) - Cutting direction against feed Head #3 is a combination head - 140 mm diameter 65 shore profiled rubber contact roller - Height adjustable contact roller with dial indicator for grit compensation - Height adjustable sanding pad - Twenty (20) horse power motor - Poly-v belt drive - Air jet belt cleaning - Cutting speed of 12 mps (40 fps) - Cutting direction against feed

IRONWOOD SLR 305 Straight Line Rip Saw Specifications: -- Width capacity of 18" and glue line tolerance up to 8'. -- Variable auto-lubrication system providing consistent lubrication to the chain track and automatically adjusting to the chain feed speed -- Minimum Material Length÷ 203 mm (8";). -- Material Thickness, Minimum- Maximum: 6.35 mm (0.25";) to 85 mm (3.35") -- Distance between Blade and Column 457 mm (18"). -- (8) Hold-down Rollers. -- Work Table Height 800 mm (31.5";). -- Saw Arbor Motor 15 HP. -- Saw Arbor Speed 4,500 RPM. -- Saw Blade Diameter 200-300 mm (8“ - 12“). -- Saw Arbor Diameter 25.4 mm (1";). -- Feed Speed 56 - 131 FPM. -- Feed Motor 2 HP.Equipped with & Features: -- Laser device to ensure straight line ripping entire length of the material. -- Maximum safety protection available with multiple rows of extended anti-kickback fingers and a side protection guard. Equipped with & Features -- (8) Accurately aligned pressure rollers extend from the cast iron machining head to provide absolute butting tolerances, low maintenance, and superior safety -- Solid steel cylindrical positioning rod and quick cam, cast iron fence provide accurate set-up, fast movement, and dust-free operations. -- Table Area (W x L) 950 mm (37";) x 1,450 mm (57";). -- Net Weight 2090 Lbs. -- Dust channel outlet (saw guard) 102 mm.

IRONWOOD DSP-2500 25" Double Sided Planer25" X 8" Double sided planer -- Max Working Width 25" -- Max Working Thickness 8" -- Min Working Thickness 6 /16" -- Min Length of Cut 12½" -- Upper Cutterhead Motor 25 hp -- Lower Cutterhead Motor 20 hp -- Feeding Cutterhead Motor 5 hp -- Table Rise/Fall Motor 1/2 hp -- Variable Feed Speed 26-78 fpm (8-24 m/min) -- Cutterhead Speed 5,000 rpm Cutterhead Diameter 5" -- Cutter Knives per Head 96 -- Max Stock Removal ½" total / ¼" per head Table adjustment -- Digital Electrical 460v (3 phase) 88 amps @ 460V -- Dust Port Diameter 2 ports, 6" each ; Dust Extraction Requirements 1,600 cfm @ 4,500 feet/min -- Machine Dimensions (W x L x H) 105" x 45" x 68" -- Gross Weight 7000 lbs

IRONWOOD P500 508 mm (20") Surface Planer, with Spiral Insert CutterheadSpecifications: -- 20" (508 mm) max. Width cap., 11.8" (300 mm) max. thickness cap., 0.393 (10 mm) min. thickness cap., 0.325 (8 mm) max. cut depth, 8.6 (220 mm) min material length (un-butted). -- 7.5 HP Main motor, 3.8" (98 mm) dia. cutter-head with 4.0' (102 mm) cutting circle @ 4,800 RPM; Spiral cutter-head with 75, 2-sided Carbide cutter inserts.Equipped with: -- Digital Position Controller for Up/Down of the Table. -- Variable speed by Frequency Inverter from 19 to 39 FPM / 1 HP feed motor. -- 0.25 HP Motorized support table, 29.4 (748 mm) long x 22.1" (562 mm) wide bed; the table is supported by (4) oversized columns with height positioning via keypad entry within the digital controller. -- Automatic power off when the top safety hood is opened. -- Both the infeed chip-breaker and the outfeed pressure rollers incorporate spring-pressured adjustments to ensure positive contact on the workpiece as it is passed through the planer. -- Two 3"; adjustable bed rollers for planing of rough or finished lumber, as well as glued panels. Complete with & more: -- Magnetic starter, Adjustable bed rollers, (1) 6" dia. Dust outlets. Requires 800 CFM; Shipping weight 1,800 Lbs. Features: -- The IRONWOOD P500 Series of 20"; thickness planers provide operators with solid thickness planning machinery that offers a powerful cutting performance. -- This machine features an enhanced heavy-duty cast iron table that is heat-treated and precision ground to assure the greatest rigidity and stability during intense cutting operations. The Ironwood Planers offers enhanced engineering designs and superior build construction for long-lasting and trouble-free performance.

Ironwood Chop Saw

14” blade 5 HP 1” Arbor 23” x 25” table

Ironwood BR23 Boring Machine 230V/3PH

J & P MACHINES - DH 2N, ...Double Hinge Drilling & InsertingDouble Drilling & Hinge Inserting Machine.Features: -- Fast setup from small to large doors. -- User-friendly movable head, which is easy to move to the preset stops. -- Pneumatic lock allows drilling at any distance. -- Quick-change hopper magazines with a loading capacity of (35) hinges. -- Insertion slide with UHMW non-wearing plastic. -- Creates chip-free bores on melamine and other sensitive materials by drilling from below. -- Boring heads with hardened gears and spindles. -- Linear bearings on slides for up & down movement. -- No tools required for precision depth adjustments. -- Double safety controls with: Metal detectors and photo eye prevent the boring unit from cycling again into the previously installed hinge. -- Dust extraction hoods with 4″ dia. -- Min. closing distance between heads is 7″ (180 mm). -- Max. opening distance is 60″ (1,520 mm); other sizes available upon request. -- PLC Control and proximity sensors. -- Emergency cord switch.Specifications: -- 2 HP - 3,600 RPM, 440 V, 3-Phase motors. -- Cycle time approx. (4) Sec. -- Compressed air 90 PSI. -- Weighs approximately 600 kG -- Dim.: 80″ L x 32″ W x 50″ H.

125 HP 460 Volt 28” x 44” inlet 7” x 40” outlet hopper included as pictured

JENKINS - JSM, NC Controlled Shaper & MortiserNC Controlled with: (1) Shaper head with ATC (18) tools, (1) tenon head, and (1) mortising head.Machine Specifications: -- Total X-travel: 122". -- Y-Axis (useful zone-1 only): 8". -- Min. length rail: 4". -- Max. length rail (Zone 2, 3 only): 96". -- Min. width rail: 1-1/4". -- Max. width rail: 12". -- Min. stock thickness: 1/2". -- Max. stock thickness: 2-1/4". -- Max. arch height (Zone 1 only): 6".Spindles: -- (1) 10 HP - 12,000 RPM non-tilting Cope spindle. -- (1) 10 HP - 18,000 RPM non-tilting high-speed Tenon spindle. -- (1) 5 HP - 18,000 RPM non-tilting, high-speed Mortise spindle. -- Tool Changer Capacity: (18) Tools.Controls: -- Industrial PC: Base powered by NEXCOM PEAK "760VL2" all-in-one computer card, industrial-grade computer chassis, LCD color touchscreen. -- YASKAWA Model "V1000": Adjustable AC frequency drives. -- ALLEN-BRADLEY: AC Servo Plus drive model "Ultra 3000".Over all dimensions: -- 16-1/2' Length. -- 120" Width. -- Floor-to-top guarding: 55". -- Floor to tabletop: 37-1/2".

JET EHVS-80 EDGE SANDER (NON-OSCILLATING)(Single-Phase) ---Price Negotiable---Make an Offer!--- - 6” x 89" Non-Oscillating Horizontal/Vertical Edge Sander - Table size 12-1/2” x 37” x 3/4” Thick, Table tilt 0° - 90° - Platen size 7" x 34" - Belt speed 3,900 SFPM - 6" x 89" Abrasive belt - 1-1/2 HP 3,600 RPM Direct drive motor - Palletized Dimensions: 50" x 31" x 44" H

JT9-414483 Blade speed 82 - 330 fpm Blade 1/8 - 1/2” Motor 1 HP, 115/230V, 1Ph Dimensions 34 x 24 x 68” Table height 39” 20 x 20 Throat 14” Weight 634#

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i57 JET JMD 18 12-Speed Bench-Top Mill/Drill Specifications: Throat 7-15/16". Max. distance spindle nose to table 26". Table size 9-1/2” x 32-1/2” x 10-1/2” H. X-Axis (Longitudinal) travel 24”, Y-Axis (Cross) travel 7”, Quill travel 5”. Quill dia. 3", Column dia. 4-1/2". Capacities: Drill 1-1/4”, Face mill 3”, & End mill 3/4”. Spindle Speeds 150, 240, 250, 350, 400, 465, 810, 1,070, 1,235, 1,485, 1,790, & 2,500 RPM. Equipped with: R8 Spindle taper. 2 HP - 1,720 RPM Motor.

10" Blade dia., 3 HP motor belt drives arbor at 4,200 RPM, 5/8" dia. left tilting arbor 0ø - 45ø, 3-1/8" max. depth @ 90ø, 2-1/8" max. depth @ 45ø, max. dado width 13/16" x 6" diameter. -- Front edge of saw to blade 12", 27" x 40" precision ground cast iron table, 34" table height. -- Equipped with: 50" XACTA FENCE system, miter gauge, 4" dia. dust outlet and magnetic push button starter.